u-boot/arch
Tom Rini 1f47e2aca4 Xilinx changes for v2020.07
common:
 - Align ENV_FAT_INTERFACE
 - Fix MAC address source print log
 - Improve based autodetection code
 
 xilinx:
 - Enable netconsole
 
 Microblaze:
 - Setup default ENV_OFFSET/ENV_SECT_SIZE
 
 Zynq:
 - Multiple DT updates/fixes
 - Use DEVICE_TREE environment variable for DTB selection
 - Switch to single zynq configuration
 - Enable NOR flash via DM
 - Minor SPL print removal
 - Enable i2c mux driver
 
 ZynqMP:
 - Print multiboot register
 - Enable cache commands in mini mtest
 - Multiple DT updates/fixes
 - Fix firmware probing when driver is not enabled
 - Specify 3rd backup RAM boot mode in SPL
 - Add SPL support for zcu102 v1.1 and zcu111 revA
 - Redesign debug uart enabling and psu_init delay
 - Enable full u-boot run from EL3
 - Enable u-boot.itb generation without ATF with U-Boot in EL3
 
 Versal:
 - Enable distro default
 - Enable others SPI flashes
 - Enable systems without DDR
 
 Drivers:
 - Gem:
   - Flush memory after freeing
   - Handle mdio bus separately
 - Watchdog:
   - Get rid of unused global data pointer
   - Enable window watchdog timer
 - Serial:
   - Change reinitialization logic in zynq serial driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXoxw9wAKCRDKSWXLKUoM
 IbQxAKCK23yTy4FoN8oTGTYsbmLOA9kVUQCbBx8lg4nBeA8ihSaAnY+HMDF37YI=
 =Lg54
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.07

common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code

xilinx:
- Enable netconsole

Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE

Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver

ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3

Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR

Drivers:
- Gem:
  - Flush memory after freeing
  - Handle mdio bus separately
- Watchdog:
  - Get rid of unused global data pointer
  - Enable window watchdog timer
- Serial:
  - Change reinitialization logic in zynq serial driver

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07 17:13:35 -04:00
..
arc ARC: IO: add MB for __raw_* memory accessors 2020-03-31 18:31:53 +03:00
arm Xilinx changes for v2020.07 2020-04-07 17:13:35 -04:00
m68k dma-mapping: add <asm/dma-mapping.h> for all architectures 2020-02-20 15:09:54 +08:00
microblaze Kconfig: Remove redundant variable sets 2020-03-16 16:42:50 -04:00
mips arch: Add explicit linker script for u-boot-elf 2020-04-03 11:52:55 -04:00
nds32 dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h> 2020-02-19 21:27:30 +08:00
nios2 common: Move hang() to the same header as panic() 2020-01-24 23:06:49 +05:30
powerpc gazerbeam: add clocks property to SPI node 2020-03-31 10:06:52 -04:00
riscv Merge branch 'next' of git://git.denx.de/u-boot-usb into next 2020-03-31 17:24:19 -04:00
sandbox dma-mapping: add <asm/dma-mapping.h> for all architectures 2020-02-20 15:09:54 +08:00
sh dma-mapping: add <asm/dma-mapping.h> for all architectures 2020-02-20 15:09:54 +08:00
x86 x86: acpi: Describe USB 3 host controller found on Intel Tangier 2020-04-04 22:08:44 +08:00
xtensa dma-mapping: add <asm/dma-mapping.h> for all architectures 2020-02-20 15:09:54 +08:00
.gitignore
Kconfig x86: Enable pinctrl in SPL and TPL 2019-12-15 11:44:24 +08:00
u-boot-elf.lds arch: Add explicit linker script for u-boot-elf 2020-04-03 11:52:55 -04:00