mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 16:53:06 +00:00
448616126b
The Ethernet controller and PHY use the device tree info to configure themselves, so it's not necessary to manually do it in the board file. This permits the removal of a bunch of headers as well. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com> |
||
|---|---|---|
| .. | ||
| imx8mn_beacon.c | ||
| imximage-8mn-lpddr4.cfg | ||
| Kconfig | ||
| lpddr4_2g_timing.c | ||
| lpddr4_timing.c | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| spl.c | ||
U-Boot for the Beacon EmbeddedWorks i.MX8M Nano Devkit Quick Start =========== - Build the ARM Trusted firmware binary - Get ddr firmware - Build U-Boot - Boot Get and Build the ARM Trusted firmware ====================================== Note: $(srctree) is U-Boot source directory $ git clone https://source.codeaurora.org/external/imx/imx-atf $ git lf-5.10.72-2.2.0 $ make PLAT=imx8mn bl31 CROSS_COMPILE=aarch64-linux-gnu- $ cp build/imx8mn/release/bl31.bin $(srctree) Get the DDR firmware ==================== $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin $ chmod +x firmware-imx-8.9.bin $ ./firmware-imx-8.9 $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mn_beacon_defconfig $ make CROSS_COMPILE=aarch64-linux-gnu- Burn U-Boot to microSD Card =========================== $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 Boot ==== Set baseboard DIP switch: S17: 1100XXXX