u-boot/board/freescale/common
Jerry Huang 1ac63e4094 powerpc/85xx: Enable eSDHC boot support on P2020 DS
We implement our own mmc_get_env_addr since the environment variables are
written to just after the u-boot image on SDCard, so we must read the MBR
to get the start address and code length of the u-boot image, then
calculate the address of the env.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Zhao Chenhui <b35336@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-04 22:26:32 -05:00
..
cadmus.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
cadmus.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
cds_pci_ft.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
cds_via.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
eeprom.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
ics307_clk.c Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
ics307_clk.h Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
Makefile powerpc/85xx: Enable eSDHC boot support on P2020 DS 2011-04-04 22:26:32 -05:00
ngpixis.c p1022ds: allow for board-specific ngPIXIS functions 2011-04-04 09:24:40 -05:00
ngpixis.h p1022ds: allow for board-specific ngPIXIS functions 2011-04-04 09:24:40 -05:00
pixis.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
pixis.h ppc/85xx: Add a structure defn for PIXIS registers 2010-07-16 10:55:08 -05:00
pq-mds-pib.c ppc/85xx: Add PIB/ATM support for MPC8569mds 2010-01-25 22:13:26 -06:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
sdhc_boot.c powerpc/85xx: Enable eSDHC boot support on P2020 DS 2011-04-04 22:26:32 -05:00
sgmii_riser.c fsl: Remove unnecessary debug printfs 2009-03-09 17:46:10 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sys_eeprom.c fsl: obsolete NXID v0 EEPROMs, automatically upgrade them to NXID v1 2011-04-04 09:24:42 -05:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00