mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
6802d7951c
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of 96Boards community and complies with all Consumer Edition board specifications. https://www.novtech.com/products/meerkat96.html https://www.96boards.org/product/imx7-96/ The initial supported/tested devices include: - Debug serial - SD - USB Host (with Ethernet) With these support, it's good enough for loading Linux Kernel from SD or Ethernet over USB. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
127 lines
4.3 KiB
INI
127 lines
4.3 KiB
INI
/*
|
|
* Copyright (C) 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Refer docs/README.imxmage for more details about how-to configure
|
|
* and create imximage boot image
|
|
*
|
|
* The syntax is taken as close as possible with the kwbimage
|
|
*/
|
|
|
|
#define __ASSEMBLY__
|
|
#include <config.h>
|
|
|
|
/* image version */
|
|
|
|
IMAGE_VERSION 2
|
|
|
|
/*
|
|
* Boot Device : sd
|
|
*/
|
|
|
|
BOOT_FROM sd
|
|
|
|
/*
|
|
* Secure boot support
|
|
*/
|
|
#ifdef CONFIG_SECURE_BOOT
|
|
CSF CONFIG_CSF_SIZE
|
|
#endif
|
|
|
|
/*
|
|
* Device Configuration Data (DCD)
|
|
*
|
|
* Each entry must have the format:
|
|
* Addr-type Address Value
|
|
*
|
|
* where:
|
|
* Addr-type register length (1,2 or 4 bytes)
|
|
* Address absolute address of the register
|
|
* value value to be stored in the register
|
|
*/
|
|
|
|
/* Enable OCRAM EPDC */
|
|
DATA 4 0x30340004 0x4F400005
|
|
|
|
/* =============================================================================
|
|
* DDR Controller Registers
|
|
* =============================================================================
|
|
* Memory type: DDR3
|
|
* Manufacturer: ISSI
|
|
* Device Part Number: IS43TR16256AL-125KBL
|
|
* Clock Freq.: 533MHz
|
|
* Density per CS in Gb: 4
|
|
* Chip Selects used: 1
|
|
* Number of Banks: 8
|
|
* Row address: 15
|
|
* Column address: 10
|
|
* Data bus width: 16
|
|
* ROW-BANK interleave: ENABLED
|
|
* =============================================================================
|
|
*/
|
|
|
|
DATA 4 0x30391000 0x00000002 // deassert presetn
|
|
DATA 4 0x307A0000 0x01041001 // DDRC_MSTR
|
|
DATA 4 0x307A0064 0x00400046 // DDRC_RFSHTMG
|
|
DATA 4 0x307a0490 0x00000001 // DDRC_PCTRL_0
|
|
DATA 4 0x307A00D4 0x00690000 // DDRC_INIT1
|
|
DATA 4 0x307A00D0 0x00020083 // DDRC_INIT0
|
|
DATA 4 0x307A00DC 0x09300004 // DDRC_INIT3
|
|
DATA 4 0x307A00E0 0x04080000 // DDRC_INIT4
|
|
DATA 4 0x307A00E4 0x00100004 // DDRC_INIT5
|
|
DATA 4 0x307A00F4 0x0000033F // DDRC_RANKCTL
|
|
DATA 4 0x307A0100 0x090B1109 // DDRC_DRAMTMG0
|
|
DATA 4 0x307A0104 0x0007020D // DDRC_DRAMTMG1
|
|
DATA 4 0x307A0108 0x03040407 // DDRC_DRAMTMG2
|
|
DATA 4 0x307A010C 0x00002006 // DDRC_DRAMTMG3
|
|
DATA 4 0x307A0110 0x04020205 // DDRC_DRAMTMG4
|
|
DATA 4 0x307A0114 0x03030202 // DDRC_DRAMTMG5
|
|
DATA 4 0x307A0120 0x00000803 // DDRC_DRAMTMG8
|
|
DATA 4 0x307A0180 0x00800020 // DDRC_ZQCTL0
|
|
DATA 4 0x307A0190 0x02098204 // DDRC_DFITMG0
|
|
DATA 4 0x307A0194 0x00030303 // DDRC_DFITMG1
|
|
DATA 4 0x307A01A0 0x80400003 // DDRC_DFIUPD0
|
|
DATA 4 0x307A01A4 0x00100020 // DDRC_DFIUPD1
|
|
DATA 4 0x307A01A8 0x80100004 // DDRC_DFIUPD2
|
|
DATA 4 0x307A0200 0x00000015 // DDRC_ADDRMAP0
|
|
DATA 4 0x307A0204 0x00070707 // DDRC_ADDRMAP1
|
|
DATA 4 0x307A0210 0x00000F0F // DDRC_ADDRMAP4
|
|
DATA 4 0x307A0214 0x06060606 // DDRC_ADDRMAP5
|
|
DATA 4 0x307A0218 0x0F060606 // DDRC_ADDRMAP6
|
|
DATA 4 0x307A0240 0x06000604 // DDRC_ODTCFG
|
|
DATA 4 0x307A0244 0x00000001 // DDRC_ODTMAP
|
|
|
|
|
|
/* =============================================================================
|
|
* PHY Control Register
|
|
* =============================================================================
|
|
*/
|
|
|
|
DATA 4 0x30391000 0x00000000 // deassert presetn
|
|
DATA 4 0x30790000 0x17420F40 // DDR_PHY_PHY_CON0
|
|
DATA 4 0x30790004 0x10210100 // DDR_PHY_PHY_CON1
|
|
DATA 4 0x30790010 0x00060807 // DDR_PHY_PHY_CON4
|
|
DATA 4 0x307900B0 0x1010007E // DDR_PHY_MDLL_CON0
|
|
DATA 4 0x3079009C 0x00000D6E // DDR_PHY_DRVDS_CON0
|
|
DATA 4 0x30790030 0x08080808 // DDR_PHY_OFFSET_WR_CON0
|
|
DATA 4 0x30790020 0x08080808 // DDR_PHY_OFFSET_RD_CON0
|
|
DATA 4 0x30790050 0x01000010 // DDR_PHY_OFFSETD_CON0
|
|
DATA 4 0x30790050 0x00000010 // DDR_PHY_OFFSETD_CON0
|
|
DATA 4 0x30790018 0x0000000F // DDR_PHY_LP_CON0
|
|
DATA 4 0x307900C0 0x0E407304 // DDR_PHY_ZQ_CON0 - Start Manual ZQ
|
|
DATA 4 0x307900C0 0x0E447304
|
|
DATA 4 0x307900C0 0x0E447306
|
|
DATA 4 0x307900C0 0x0E447304 // <= NOTE: Depending on JTAG device used, may need ~ 7 us pause at this point.
|
|
DATA 4 0x307900C0 0x0E407304 // DDR_PHY_ZQ_CON0 - End Manual ZQ
|
|
|
|
|
|
/* =============================================================================
|
|
* Final Initialization start sequence
|
|
* =============================================================================
|
|
*/
|
|
|
|
DATA 4 0x30384130 0x00000000 // Disable Clock
|
|
DATA 4 0x30340020 0x00000178 // IOMUX_GRP_GRP8 - Start input to PHY
|
|
DATA 4 0x30384130 0x00000002 // Enable Clock
|
|
/* <= NOTE: Depending on JTAG device used, may need ~ 250 us pause at this point. */
|