u-boot/arch/arm/dts/imx8mp-evk-u-boot.dtsi
Peng Fan 439321b264 imx: add i.MX8MP EVK board
Add basic i.MX8MP EVK board support

U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)
power_pca9450b_init
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Failed to find clock node. Check device tree
WDT:   Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)

CPU:   Freescale i.MX8MP rev1.0 at 1000 MHz
Reset cause: POR
Model: NXP i.MX8MPlus EVK board
DRAM:  6 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
u-boot=> mmc list
FSL_SDHC: 1 (SD)
FSL_SDHC: 2

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:09 +01:00

121 lines
1 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
*/
&{/soc@0} {
u-boot,dm-pre-reloc;
u-boot,dm-spl;
};
&clk {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&osc_32k {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&osc_24m {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&aips1 {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&aips2 {
u-boot,dm-spl;
};
&aips3 {
u-boot,dm-spl;
};
&iomuxc {
u-boot,dm-spl;
};
&reg_usdhc2_vmmc {
u-boot,dm-spl;
};
&pinctrl_uart2 {
u-boot,dm-spl;
};
&pinctrl_usdhc2_gpio {
u-boot,dm-spl;
};
&pinctrl_usdhc2 {
u-boot,dm-spl;
};
&pinctrl_usdhc3 {
u-boot,dm-spl;
};
&gpio1 {
u-boot,dm-spl;
};
&gpio2 {
u-boot,dm-spl;
};
&gpio3 {
u-boot,dm-spl;
};
&gpio4 {
u-boot,dm-spl;
};
&gpio5 {
u-boot,dm-spl;
};
&uart2 {
u-boot,dm-spl;
};
&i2c1 {
u-boot,dm-spl;
};
&i2c2 {
u-boot,dm-spl;
};
&i2c3 {
u-boot,dm-spl;
};
&i2c4 {
u-boot,dm-spl;
};
&i2c5 {
u-boot,dm-spl;
};
&i2c6 {
u-boot,dm-spl;
};
&usdhc1 {
u-boot,dm-spl;
};
&usdhc2 {
u-boot,dm-spl;
};
&usdhc3 {
u-boot,dm-spl;
};