mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
a89c33db96
Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
563 lines
15 KiB
C
563 lines
15 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#include <commproc.h>
|
|
#include <i2c.h>
|
|
#include <command.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
static void puma_status (void);
|
|
static void puma_set_mode (int mode);
|
|
static int puma_init_done (void);
|
|
static void puma_load (ulong addr, ulong len);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
/*
|
|
* 50 MHz SDRAM access using UPM A
|
|
*/
|
|
const uint sdram_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPM RAM)
|
|
*/
|
|
0x1f0dfc04, 0xeeafbc04, 0x11af7c04, 0xefbeec00,
|
|
0x1ffddc47, /* last */
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPM RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0x1ffddc35, 0xefceac34, 0x1f3d5c35, /* last */
|
|
/*
|
|
* Burst Read. (Offset 8 in UPM RAM)
|
|
*/
|
|
0x1f0dfc04, 0xeeafbc04, 0x10af7c04, 0xf0affc00,
|
|
0xf0affc00, 0xf1affc00, 0xefbeec00, 0x1ffddc47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
|
|
/*
|
|
* Single Write. (Offset 18 in UPM RAM)
|
|
*/
|
|
0x1f0dfc04, 0xeeafac00, 0x01be4c04, 0x1ffddc47, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPM RAM)
|
|
*/
|
|
0x1f0dfc04, 0xeeafac00, 0x10af5c00, 0xf0affc00,
|
|
0xf0affc00, 0xe1beec04, 0x1ffddc47, /* last */
|
|
_NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPM RAM)
|
|
*/
|
|
0x1ffd7c84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
0xfffffc84, 0xfffffc07, /* last */
|
|
_NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPM RAM)
|
|
*/
|
|
0x7ffffc07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* PUMA access using UPM B
|
|
*/
|
|
const uint puma_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPM RAM)
|
|
*/
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_,
|
|
/*
|
|
* Precharge and MRS
|
|
*/
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Read. (Offset 8 in UPM RAM)
|
|
*/
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPM RAM)
|
|
*/
|
|
0x0ffff804, 0x0ffff400, 0x3ffffc47, /* last */
|
|
_NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPM RAM)
|
|
*/
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPM RAM)
|
|
*/
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPM RAM)
|
|
*/
|
|
0x7ffffc07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: Siemens PCU E\n");
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immr->im_memctl;
|
|
long int size_b0, reg;
|
|
int i;
|
|
|
|
/*
|
|
* Configure UPMA for SDRAM
|
|
*/
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
|
|
|
|
/* burst length=4, burst type=sequential, CAS latency=2 */
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller bank 2 to the SDRAM bank at preliminary address.
|
|
*/
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
|
|
memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
|
|
#else /* XXX */
|
|
memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
|
|
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
|
|
#endif /* XXX */
|
|
|
|
/* initialize memory address register */
|
|
memctl->memc_mamr = CONFIG_SYS_MAMR; /* refresh not enabled yet */
|
|
|
|
/* mode initialization (offset 5) */
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
udelay (200); /* 0x8000A105 */
|
|
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF (1) | MCR_MAD (0x05);
|
|
#else /* XXX */
|
|
udelay (200); /* 0x80004105 */
|
|
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF (1) | MCR_MAD (0x05);
|
|
#endif /* XXX */
|
|
|
|
/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
udelay (1); /* 0x8000A830 */
|
|
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF (8) | MCR_MAD (0x30);
|
|
#else /* XXX */
|
|
udelay (1); /* 0x80004830 */
|
|
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF (8) | MCR_MAD (0x30);
|
|
#endif /* XXX */
|
|
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
udelay (1); /* 0x8000A106 */
|
|
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF (1) | MCR_MAD (0x06);
|
|
#else /* XXX */
|
|
udelay (1); /* 0x80004106 */
|
|
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF (1) | MCR_MAD (0x06);
|
|
#endif /* XXX */
|
|
|
|
reg = memctl->memc_mamr;
|
|
reg &= ~MAMR_TLFA_MSK; /* switch timer loop ... */
|
|
reg |= MAMR_TLFA_4X; /* ... to 4x */
|
|
reg |= MAMR_PTAE; /* enable refresh */
|
|
memctl->memc_mamr = reg;
|
|
|
|
udelay (200);
|
|
|
|
/* Need at least 10 DRAM accesses to stabilize */
|
|
for (i = 0; i < 10; ++i) {
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
volatile unsigned long *addr =
|
|
(volatile unsigned long *) SDRAM_BASE5_PRELIM;
|
|
#else /* XXX */
|
|
volatile unsigned long *addr =
|
|
(volatile unsigned long *) SDRAM_BASE2_PRELIM;
|
|
#endif /* XXX */
|
|
unsigned long val;
|
|
|
|
val = *(addr + i);
|
|
*(addr + i) = val;
|
|
}
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*/
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
size_b0 = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE5_PRELIM, SDRAM_MAX_SIZE);
|
|
#else /* XXX */
|
|
size_b0 = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
|
|
#endif /* XXX */
|
|
|
|
memctl->memc_mamr = CONFIG_SYS_MAMR | MAMR_PTAE;
|
|
|
|
/*
|
|
* Final mapping:
|
|
*/
|
|
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
memctl->memc_or5 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING;
|
|
memctl->memc_br5 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
#else /* XXX */
|
|
memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING;
|
|
memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
#endif /* XXX */
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Configure UPMB for PUMA
|
|
*/
|
|
upmconfig (UPMB, (uint *) puma_table,
|
|
sizeof (puma_table) / sizeof (uint));
|
|
|
|
return (size_b0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base,
|
|
long int maxsize)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immr->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size (base, maxsize));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
#define ETH_CFG_BITS (CONFIG_SYS_PB_ETH_CFG1 | CONFIG_SYS_PB_ETH_CFG2 | CONFIG_SYS_PB_ETH_CFG3 )
|
|
#else /* XXX */
|
|
#define ETH_CFG_BITS (CONFIG_SYS_PB_ETH_MDDIS | CONFIG_SYS_PB_ETH_CFG1 | \
|
|
CONFIG_SYS_PB_ETH_CFG2 | CONFIG_SYS_PB_ETH_CFG3 )
|
|
#endif /* XXX */
|
|
|
|
#define ETH_ALL_BITS (ETH_CFG_BITS | CONFIG_SYS_PB_ETH_POWERDOWN | CONFIG_SYS_PB_ETH_RESET)
|
|
|
|
void reset_phy (void)
|
|
{
|
|
immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
ulong value;
|
|
|
|
/* Configure all needed port pins for GPIO */
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
# ifdef CONFIG_SYS_ETH_MDDIS_VALUE
|
|
immr->im_ioport.iop_padat |= CONFIG_SYS_PA_ETH_MDDIS;
|
|
# else
|
|
immr->im_ioport.iop_padat &= ~(CONFIG_SYS_PA_ETH_MDDIS); /* Set low */
|
|
# endif
|
|
immr->im_ioport.iop_papar &= ~(CONFIG_SYS_PA_ETH_MDDIS); /* GPIO */
|
|
immr->im_ioport.iop_paodr &= ~(CONFIG_SYS_PA_ETH_MDDIS); /* active output */
|
|
immr->im_ioport.iop_padir |= CONFIG_SYS_PA_ETH_MDDIS; /* output */
|
|
#endif /* XXX */
|
|
immr->im_cpm.cp_pbpar &= ~(ETH_ALL_BITS); /* GPIO */
|
|
immr->im_cpm.cp_pbodr &= ~(ETH_ALL_BITS); /* active output */
|
|
|
|
value = immr->im_cpm.cp_pbdat;
|
|
|
|
/* Assert Powerdown and Reset signals */
|
|
value |= CONFIG_SYS_PB_ETH_POWERDOWN;
|
|
value &= ~(CONFIG_SYS_PB_ETH_RESET);
|
|
|
|
/* PHY configuration includes MDDIS and CFG1 ... CFG3 */
|
|
#if !PCU_E_WITH_SWAPPED_CS
|
|
# ifdef CONFIG_SYS_ETH_MDDIS_VALUE
|
|
value |= CONFIG_SYS_PB_ETH_MDDIS;
|
|
# else
|
|
value &= ~(CONFIG_SYS_PB_ETH_MDDIS);
|
|
# endif
|
|
#endif
|
|
#ifdef CONFIG_SYS_ETH_CFG1_VALUE
|
|
value |= CONFIG_SYS_PB_ETH_CFG1;
|
|
#else
|
|
value &= ~(CONFIG_SYS_PB_ETH_CFG1);
|
|
#endif
|
|
#ifdef CONFIG_SYS_ETH_CFG2_VALUE
|
|
value |= CONFIG_SYS_PB_ETH_CFG2;
|
|
#else
|
|
value &= ~(CONFIG_SYS_PB_ETH_CFG2);
|
|
#endif
|
|
#ifdef CONFIG_SYS_ETH_CFG3_VALUE
|
|
value |= CONFIG_SYS_PB_ETH_CFG3;
|
|
#else
|
|
value &= ~(CONFIG_SYS_PB_ETH_CFG3);
|
|
#endif
|
|
|
|
/* Drive output signals to initial state */
|
|
immr->im_cpm.cp_pbdat = value;
|
|
immr->im_cpm.cp_pbdir |= ETH_ALL_BITS;
|
|
udelay (10000);
|
|
|
|
/* De-assert Ethernet Powerdown */
|
|
immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* Enable PHY power */
|
|
udelay (10000);
|
|
|
|
/* de-assert RESET signal of PHY */
|
|
immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_ETH_RESET;
|
|
udelay (1000);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Board Special Commands: access functions for "PUMA" FPGA
|
|
*/
|
|
#if defined(CONFIG_CMD_BSP)
|
|
|
|
#define PUMA_READ_MODE 0
|
|
#define PUMA_LOAD_MODE 1
|
|
|
|
int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
ulong addr, len;
|
|
|
|
switch (argc) {
|
|
case 2: /* PUMA reset */
|
|
if (strncmp (argv[1], "stat", 4) == 0) { /* Reset */
|
|
puma_status ();
|
|
return 0;
|
|
}
|
|
break;
|
|
case 4: /* PUMA load addr len */
|
|
if (strcmp (argv[1], "load") != 0)
|
|
break;
|
|
|
|
addr = simple_strtoul (argv[2], NULL, 16);
|
|
len = simple_strtoul (argv[3], NULL, 16);
|
|
|
|
printf ("PUMA load: addr %08lX len %ld (0x%lX): ",
|
|
addr, len, len);
|
|
puma_load (addr, len);
|
|
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
cmd_usage(cmdtp);
|
|
return 1;
|
|
}
|
|
|
|
U_BOOT_CMD (puma, 4, 1, do_puma,
|
|
"access PUMA FPGA",
|
|
"status - print PUMA status\n"
|
|
"puma load addr len - load PUMA configuration data"
|
|
);
|
|
#endif
|
|
|
|
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
|
|
|
|
static void puma_set_mode (int mode)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immr->im_memctl;
|
|
|
|
/* disable PUMA in memory controller */
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
memctl->memc_br3 = 0;
|
|
#else /* XXX */
|
|
memctl->memc_br4 = 0;
|
|
#endif /* XXX */
|
|
|
|
switch (mode) {
|
|
case PUMA_READ_MODE:
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
memctl->memc_or3 = PUMA_CONF_OR_READ;
|
|
memctl->memc_br3 = PUMA_CONF_BR_READ;
|
|
#else /* XXX */
|
|
memctl->memc_or4 = PUMA_CONF_OR_READ;
|
|
memctl->memc_br4 = PUMA_CONF_BR_READ;
|
|
#endif /* XXX */
|
|
break;
|
|
case PUMA_LOAD_MODE:
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
memctl->memc_or3 = PUMA_CONF_OR_LOAD;
|
|
memctl->memc_br3 = PUMA_CONF_BR_LOAD;
|
|
#else /* XXX */
|
|
memctl->memc_or4 = PUMA_CONF_OR_READ;
|
|
memctl->memc_br4 = PUMA_CONF_BR_READ;
|
|
#endif /* XXX */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
|
|
|
|
#define PUMA_INIT_TIMEOUT 1000 /* max. 1000 ms = 1 second */
|
|
|
|
static void puma_load (ulong addr, ulong len)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile uchar *fpga_addr = (volatile uchar *) PUMA_CONF_BASE; /* XXX ??? */
|
|
uchar *data = (uchar *) addr;
|
|
int i;
|
|
|
|
/* align length */
|
|
if (len & 1)
|
|
++len;
|
|
|
|
/* Reset FPGA */
|
|
immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_PUMA_INIT); /* make input */
|
|
immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_PUMA_INIT);
|
|
immr->im_ioport.iop_pcdir &= ~(CONFIG_SYS_PC_PUMA_INIT);
|
|
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_PUMA_PROG); /* GPIO */
|
|
immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_PUMA_PROG); /* active output */
|
|
immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_PUMA_PROG); /* Set low */
|
|
immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_PUMA_PROG; /* output */
|
|
#else
|
|
immr->im_ioport.iop_papar &= ~(CONFIG_SYS_PA_PUMA_PROG); /* GPIO */
|
|
immr->im_ioport.iop_padat &= ~(CONFIG_SYS_PA_PUMA_PROG); /* Set low */
|
|
immr->im_ioport.iop_paodr &= ~(CONFIG_SYS_PA_PUMA_PROG); /* active output */
|
|
immr->im_ioport.iop_padir |= CONFIG_SYS_PA_PUMA_PROG; /* output */
|
|
#endif /* XXX */
|
|
udelay (100);
|
|
|
|
#if PCU_E_WITH_SWAPPED_CS /* XXX */
|
|
immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_PUMA_PROG; /* release reset */
|
|
#else
|
|
immr->im_ioport.iop_padat |= CONFIG_SYS_PA_PUMA_PROG; /* release reset */
|
|
#endif /* XXX */
|
|
|
|
/* wait until INIT indicates completion of reset */
|
|
for (i = 0; i < PUMA_INIT_TIMEOUT; ++i) {
|
|
udelay (1000);
|
|
if (immr->im_ioport.iop_pcdat & CONFIG_SYS_PC_PUMA_INIT)
|
|
break;
|
|
}
|
|
if (i == PUMA_INIT_TIMEOUT) {
|
|
printf ("*** PUMA init timeout ***\n");
|
|
return;
|
|
}
|
|
|
|
puma_set_mode (PUMA_LOAD_MODE);
|
|
|
|
while (len--)
|
|
*fpga_addr = *data++;
|
|
|
|
puma_set_mode (PUMA_READ_MODE);
|
|
|
|
puma_status ();
|
|
}
|
|
|
|
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
|
|
|
|
static void puma_status (void)
|
|
{
|
|
/* Check state */
|
|
printf ("PUMA initialization is %scomplete\n",
|
|
puma_init_done ()? "" : "NOT ");
|
|
}
|
|
|
|
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
|
|
|
|
static int puma_init_done (void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
/* make sure pin is GPIO input */
|
|
immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_PUMA_DONE);
|
|
immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_PUMA_DONE);
|
|
immr->im_ioport.iop_pcdir &= ~(CONFIG_SYS_PC_PUMA_DONE);
|
|
|
|
return (immr->im_ioport.iop_pcdat & CONFIG_SYS_PC_PUMA_DONE) ? 1 : 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
ulong addr = 0;
|
|
ulong len = 0;
|
|
char *s;
|
|
|
|
printf ("PUMA: ");
|
|
if (puma_init_done ()) {
|
|
printf ("initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
if ((s = getenv ("puma_addr")) != NULL)
|
|
addr = simple_strtoul (s, NULL, 16);
|
|
|
|
if ((s = getenv ("puma_len")) != NULL)
|
|
len = simple_strtoul (s, NULL, 16);
|
|
|
|
if ((!addr) || (!len)) {
|
|
printf ("net list undefined\n");
|
|
return 0;
|
|
}
|
|
|
|
printf ("loading... ");
|
|
|
|
puma_load (addr, len);
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|