Tom Rini 0a9e34056f gpio: omap: Drop 'method' parameter ... The "method" parameter was part of the original port of the driver from the kernel. At some point this may have been added to allow for future differentiation (as omap1 and omap2 have different GPIO IP blocks, so this wasn't an unreasonable thing to do). At this point however it's just extra overhead, so drop. Signed-off-by: Tom Rini <trini@konsulko.com>		2015-08-12 20:48:06 -04:00
..
abb.c	DRA7: add ABB setup for MPU voltage domain	2014-01-24 11:41:17 -05:00
boot.c	omap5: Definitions for SYS_BOOT-based fallback boot device selection	2015-07-27 15:02:09 -04:00
config.mk	kbuild: use shorten logs for mkimage rules	2014-02-25 11:01:29 -05:00
dra7xx_iodelay.c	ARM: DRA7: Add support for manual mode configuration	2015-06-12 13:02:05 -04:00
emif.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
hw_data.c	ARM: DRA7: Change configuration to prevent DDR reset control from EMIF	2015-06-19 16:46:48 -04:00
hwinit.c	gpio: omap: Drop 'method' parameter	2015-08-12 20:48:06 -04:00
Kconfig	arch: Make board selection choices optional	2015-05-12 18:10:02 -04:00
Makefile	omap5: Definitions for SYS_BOOT-based fallback boot device selection	2015-07-27 15:02:09 -04:00
prcm-regs.c	ARM: BeagleBoard-x15: Enable i2c5 clocks	2015-06-15 10:57:26 -04:00
sdram.c	ARM: DRA7xx: EMIF: Fix DLL_CALIB_CTRL register	2015-06-12 12:43:07 -04:00