mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 02:20:25 +00:00
81d0128d2b
All drivers which was using clock_get() are now using clk_get_rate() from clock framework, now it's safe to remove clock_get(). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
108 lines
3.7 KiB
C
108 lines
3.7 KiB
C
/*
|
|
* (C) Copyright 2016
|
|
* Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _ASM_ARCH_HARDWARE_H
|
|
#define _ASM_ARCH_HARDWARE_H
|
|
|
|
/* STM32F746 */
|
|
#define ITCM_FLASH_BASE 0x00200000UL
|
|
#define AXIM_FLASH_BASE 0x08000000UL
|
|
|
|
#define ITCM_SRAM_BASE 0x00000000UL
|
|
#define DTCM_SRAM_BASE 0x20000000UL
|
|
#define SRAM1_BASE 0x20010000UL
|
|
#define SRAM2_BASE 0x2004C000UL
|
|
|
|
#define PERIPH_BASE 0x40000000UL
|
|
|
|
#define APB1_PERIPH_BASE (PERIPH_BASE + 0x00000000)
|
|
#define APB2_PERIPH_BASE (PERIPH_BASE + 0x00010000)
|
|
#define AHB1_PERIPH_BASE (PERIPH_BASE + 0x00020000)
|
|
#define AHB2_PERIPH_BASE (PERIPH_BASE + 0x10000000)
|
|
#define AHB3_PERIPH_BASE (PERIPH_BASE + 0x20000000)
|
|
|
|
#define TIM2_BASE (APB1_PERIPH_BASE + 0x0000)
|
|
#define USART2_BASE (APB1_PERIPH_BASE + 0x4400)
|
|
#define USART3_BASE (APB1_PERIPH_BASE + 0x4800)
|
|
#define PWR_BASE (APB1_PERIPH_BASE + 0x7000)
|
|
|
|
#define USART1_BASE (APB2_PERIPH_BASE + 0x1000)
|
|
#define USART6_BASE (APB2_PERIPH_BASE + 0x1400)
|
|
#define STM32_SYSCFG_BASE (APB2_PERIPH_BASE + 0x3800)
|
|
|
|
#define STM32_GPIOA_BASE (AHB1_PERIPH_BASE + 0x0000)
|
|
#define STM32_GPIOB_BASE (AHB1_PERIPH_BASE + 0x0400)
|
|
#define STM32_GPIOC_BASE (AHB1_PERIPH_BASE + 0x0800)
|
|
#define STM32_GPIOD_BASE (AHB1_PERIPH_BASE + 0x0C00)
|
|
#define STM32_GPIOE_BASE (AHB1_PERIPH_BASE + 0x1000)
|
|
#define STM32_GPIOF_BASE (AHB1_PERIPH_BASE + 0x1400)
|
|
#define STM32_GPIOG_BASE (AHB1_PERIPH_BASE + 0x1800)
|
|
#define STM32_GPIOH_BASE (AHB1_PERIPH_BASE + 0x1C00)
|
|
#define STM32_GPIOI_BASE (AHB1_PERIPH_BASE + 0x2000)
|
|
#define STM32_GPIOJ_BASE (AHB1_PERIPH_BASE + 0x2400)
|
|
#define STM32_GPIOK_BASE (AHB1_PERIPH_BASE + 0x2800)
|
|
#define RCC_BASE (AHB1_PERIPH_BASE + 0x3800)
|
|
#define FLASH_CNTL_BASE (AHB1_PERIPH_BASE + 0x3C00)
|
|
|
|
|
|
#define SDRAM_FMC_BASE (AHB3_PERIPH_BASE + 0x40000140)
|
|
|
|
static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
|
|
[0 ... 3] = 32 * 1024,
|
|
[4] = 128 * 1024,
|
|
[5 ... 7] = 256 * 1024
|
|
};
|
|
|
|
#define STM32_BUS_MASK GENMASK(31, 16)
|
|
|
|
struct stm32_rcc_regs {
|
|
u32 cr; /* RCC clock control */
|
|
u32 pllcfgr; /* RCC PLL configuration */
|
|
u32 cfgr; /* RCC clock configuration */
|
|
u32 cir; /* RCC clock interrupt */
|
|
u32 ahb1rstr; /* RCC AHB1 peripheral reset */
|
|
u32 ahb2rstr; /* RCC AHB2 peripheral reset */
|
|
u32 ahb3rstr; /* RCC AHB3 peripheral reset */
|
|
u32 rsv0;
|
|
u32 apb1rstr; /* RCC APB1 peripheral reset */
|
|
u32 apb2rstr; /* RCC APB2 peripheral reset */
|
|
u32 rsv1[2];
|
|
u32 ahb1enr; /* RCC AHB1 peripheral clock enable */
|
|
u32 ahb2enr; /* RCC AHB2 peripheral clock enable */
|
|
u32 ahb3enr; /* RCC AHB3 peripheral clock enable */
|
|
u32 rsv2;
|
|
u32 apb1enr; /* RCC APB1 peripheral clock enable */
|
|
u32 apb2enr; /* RCC APB2 peripheral clock enable */
|
|
u32 rsv3[2];
|
|
u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */
|
|
u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */
|
|
u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */
|
|
u32 rsv4;
|
|
u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */
|
|
u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */
|
|
u32 rsv5[2];
|
|
u32 bdcr; /* RCC Backup domain control */
|
|
u32 csr; /* RCC clock control & status */
|
|
u32 rsv6[2];
|
|
u32 sscgr; /* RCC spread spectrum clock generation */
|
|
u32 plli2scfgr; /* RCC PLLI2S configuration */
|
|
u32 pllsaicfgr; /* PLLSAI configuration */
|
|
u32 dckcfgr; /* dedicated clocks configuration register */
|
|
};
|
|
#define STM32_RCC ((struct stm32_rcc_regs *)RCC_BASE)
|
|
|
|
struct stm32_pwr_regs {
|
|
u32 cr1; /* power control register 1 */
|
|
u32 csr1; /* power control/status register 2 */
|
|
u32 cr2; /* power control register 2 */
|
|
u32 csr2; /* power control/status register 2 */
|
|
};
|
|
#define STM32_PWR ((struct stm32_pwr_regs *)PWR_BASE)
|
|
|
|
void stm32_flash_latency_cfg(int latency);
|
|
|
|
#endif /* _ASM_ARCH_HARDWARE_H */
|