mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
dbd2a382c1
The Zyxel NSA310s board has the network chip Marvell Alaska 88E1318S. Use uclass mvgbe and the compatible driver M88E1310 driver to bring up Ethernet. - Use uclass mvgbe to bring up the network. And remove ad-hoc code. - Remove CONFIG_RESET_PHY_R. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Add phy mode RGMII to kirkwood-nsa310s.dts - Miscellaneous changes: Move constants to .c file and remove header file board/zyxel/nsa310s/nsa310s.h, add support for large USB and SATA HDDs, use BIT macro, add/cleanup comments, and cosmetic changes. Note that this patch is depended on the following patch: https://patchwork.ozlabs.org/project/uboot/patch/20220412201820.10291-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
319 lines
6.2 KiB
Text
319 lines
6.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device tree file for the Zyxel NSA 310S NAS box.
|
|
*
|
|
* Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
|
|
*
|
|
* Based on
|
|
* Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
|
|
* Based upon the board setup file created by Peter Schildmann
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "kirkwood.dtsi"
|
|
#include "kirkwood-6281.dtsi"
|
|
|
|
/ {
|
|
model = "Zyxel NSA310S";
|
|
compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
pinctrl: pin-controller@10000 {
|
|
pinctrl-names = "default";
|
|
|
|
pmx_sata0: pmx-sata0 {
|
|
marvell,pins ;
|
|
marvell,function = "sata0";
|
|
};
|
|
|
|
pmx_sata1: pmx-sata1 {
|
|
marvell,pins ;
|
|
marvell,function = "sata1";
|
|
};
|
|
|
|
pmx_usb_power: pmx-usb-power {
|
|
marvell,pins = "mpp21";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pwr_off: pmx-pwr-off {
|
|
marvell,pins = "mpp27";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_btn_reset: pmx-btn-reset {
|
|
marvell,pins = "mpp24";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_btn_copy: pmx-btn-copy {
|
|
marvell,pins = "mpp25";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_btn_power: pmx-btn-power {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_hdd2_green: pmx-led-hdd2-green {
|
|
marvell,pins = "mpp34";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_hdd2_red: pmx-led-hdd2-red {
|
|
marvell,pins = "mpp12";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_usb_green: pmx-led-usb-green {
|
|
marvell,pins = "mpp15";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_copy_green: pmx-led-copy-green {
|
|
marvell,pins = "mpp22";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_copy_red: pmx-led-copy-red {
|
|
marvell,pins = "mpp23";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_sys_green: pmx-led-sys-green {
|
|
marvell,pins = "mpp28";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_sys_orange: pmx-led-sys-orange {
|
|
marvell,pins = "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_hdd1_green: pmx-led-hdd1-green {
|
|
marvell,pins = "mpp16";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_hdd1_red: pmx-led-hdd1-red {
|
|
marvell,pins = "mpp13";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_pwr_sata1: pmx-pwr-sata1 {
|
|
marvell,pins = "mpp33";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
serial@12000 {
|
|
status = "ok";
|
|
};
|
|
|
|
sata@80000 {
|
|
status = "okay";
|
|
nr-ports = <1>;
|
|
};
|
|
|
|
rtc@10300 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@11000 {
|
|
status = "okay";
|
|
ht1382: rtc@68 {
|
|
compatible = "htk,ht1382";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
|
|
|
|
usb0_power: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "USB Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sata1_power: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "SATA1 Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
gpio_poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&pmx_pwr_off>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
|
|
pinctrl-names = "default";
|
|
|
|
button@1 {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
button@2 {
|
|
label = "Copy Button";
|
|
linux,code = <KEY_COPY>;
|
|
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
|
};
|
|
button@3 {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
|
|
&pmx_led_usb_green
|
|
&pmx_led_sys_green &pmx_led_sys_orange
|
|
&pmx_led_copy_green &pmx_led_copy_red
|
|
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
|
|
pinctrl-names = "default";
|
|
|
|
green-sys {
|
|
label = "nsa310s:green:sys";
|
|
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
orange-sys {
|
|
label = "nsa310s:orange:sys";
|
|
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
green-hdd1 {
|
|
label = "nsa310s:green:hdd1";
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
red-hdd1 {
|
|
label = "nsa310s:red:hdd1";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
green-hdd2 {
|
|
label = "nsa310s:green:hdd2";
|
|
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
red-hdd2 {
|
|
label = "nsa310s:red:hdd2";
|
|
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
green-usb {
|
|
label = "nsa310s:green:usb";
|
|
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
green-copy {
|
|
label = "nsa310s:green:copy";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "ide-disk";
|
|
};
|
|
red-copy {
|
|
label = "nsa310s:red:copy";
|
|
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
chip-delay = <35>;
|
|
|
|
partition@0 {
|
|
label = "uboot";
|
|
reg = <0x0000000 0x0100000>;
|
|
};
|
|
partition@100000 {
|
|
label = "stock_uboot_env";
|
|
reg = <0x0100000 0x0080000>;
|
|
};
|
|
partition@180000 {
|
|
label = "key_store";
|
|
reg = <0x0180000 0x0080000>;
|
|
};
|
|
partition@200000 {
|
|
label = "info";
|
|
reg = <0x0200000 0x0080000>;
|
|
};
|
|
partition@280000 {
|
|
label = "etc";
|
|
reg = <0x0280000 0x0a00000>;
|
|
};
|
|
partition@c80000 {
|
|
label = "kernel_1";
|
|
reg = <0x0c80000 0x0a00000>;
|
|
};
|
|
partition@1680000 {
|
|
label = "rootfs1";
|
|
reg = <0x1680000 0x2fc0000>;
|
|
};
|
|
partition@4640000 {
|
|
label = "kernel_2";
|
|
reg = <0x4640000 0x0a00000>;
|
|
};
|
|
partition@5040000 {
|
|
label = "rootfs2";
|
|
reg = <0x5040000 0x2fc0000>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
ethphy0: ethernet-phy@1 {
|
|
compatible = "marvell,88e1510";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
ethernet0-port@0 {
|
|
phy-handle = <ðphy0>;
|
|
phy-mode = "rgmii";
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
};
|