u-boot/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
Steve Kipisz 52f7d8442e am335x:Handle worst case scenario for Errata 1.0.24
In Errata 1.0.24, if the board is running at OPP50 and has a warm reset,
the boot ROM sets the frequencies for OPP100. This patch attempts to
drop the frequencies back to OPP50 as soon as possible in the SPL. Then
later the voltages and frequencies up set higher.

Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
[trini: Adapt to current framework]
Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20 16:57:40 -04:00

146 lines
4 KiB
C

/*
* clock_am33xx.c
*
* clocks for AM33XX based boards
*
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
#define OSC (V_OSCK/1000000)
struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC;
const struct dpll_regs dpll_mpu_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x88,
.cm_idlest_dpll = CM_WKUP + 0x20,
.cm_clksel_dpll = CM_WKUP + 0x2C,
.cm_div_m2_dpll = CM_WKUP + 0xA8,
};
const struct dpll_regs dpll_core_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x90,
.cm_idlest_dpll = CM_WKUP + 0x5C,
.cm_clksel_dpll = CM_WKUP + 0x68,
.cm_div_m4_dpll = CM_WKUP + 0x80,
.cm_div_m5_dpll = CM_WKUP + 0x84,
.cm_div_m6_dpll = CM_WKUP + 0xD8,
};
const struct dpll_regs dpll_per_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x8C,
.cm_idlest_dpll = CM_WKUP + 0x70,
.cm_clksel_dpll = CM_WKUP + 0x9C,
.cm_div_m2_dpll = CM_WKUP + 0xAC,
};
const struct dpll_regs dpll_ddr_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x94,
.cm_idlest_dpll = CM_WKUP + 0x34,
.cm_clksel_dpll = CM_WKUP + 0x40,
.cm_div_m2_dpll = CM_WKUP + 0xA0,
};
struct dpll_params dpll_mpu_opp100 = {
CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1};
const struct dpll_params dpll_core_opp100 = {
1000, OSC-1, -1, -1, 10, 8, 4};
const struct dpll_params dpll_mpu = {
MPUPLL_M_300, OSC-1, 1, -1, -1, -1, -1};
const struct dpll_params dpll_core = {
50, OSC-1, -1, -1, 1, 1, 1};
const struct dpll_params dpll_per = {
960, OSC-1, 5, -1, -1, -1, -1};
void setup_clocks_for_console(void)
{
clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
CD_CLKCTRL_CLKTRCTRL_SHIFT);
clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
CD_CLKCTRL_CLKTRCTRL_SHIFT);
clrsetbits_le32(&cmwkup->wkup_uart0ctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
clrsetbits_le32(&cmper->uart1clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
clrsetbits_le32(&cmper->uart2clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
clrsetbits_le32(&cmper->uart3clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
clrsetbits_le32(&cmper->uart4clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
clrsetbits_le32(&cmper->uart5clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
}
void enable_basic_clocks(void)
{
u32 *const clk_domains[] = {
&cmper->l3clkstctrl,
&cmper->l4fwclkstctrl,
&cmper->l3sclkstctrl,
&cmper->l4lsclkstctrl,
&cmwkup->wkclkstctrl,
&cmper->emiffwclkctrl,
&cmrtc->clkstctrl,
0
};
u32 *const clk_modules_explicit_en[] = {
&cmper->l3clkctrl,
&cmper->l4lsclkctrl,
&cmper->l4fwclkctrl,
&cmwkup->wkl4wkclkctrl,
&cmper->l3instrclkctrl,
&cmper->l4hsclkctrl,
&cmwkup->wkgpio0clkctrl,
&cmwkup->wkctrlclkctrl,
&cmper->timer2clkctrl,
&cmper->gpmcclkctrl,
&cmper->elmclkctrl,
&cmper->mmc0clkctrl,
&cmper->mmc1clkctrl,
&cmwkup->wkup_i2c0ctrl,
&cmper->gpio1clkctrl,
&cmper->gpio2clkctrl,
&cmper->gpio3clkctrl,
&cmper->i2c1clkctrl,
&cmper->cpgmac0clkctrl,
&cmper->spi0clkctrl,
&cmrtc->rtcclkctrl,
&cmper->usb0clkctrl,
&cmper->emiffwclkctrl,
&cmper->emifclkctrl,
0
};
do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
/* Select the Master osc 24 MHZ as Timer2 clock source */
writel(0x1, &cmdpll->clktimer2clk);
}