u-boot/board/freescale/common
Timur Tabi 3fee334c85 fsl: update CRC after setting EEPROM identifier
The "mac id" command is used to initialize the EEPROM data to a specific
format, but it was not updating the CRC.  This didn't cause any real
problems, because writing the data to the EEPROM will always update the
CRC anyway, but it did result in a bogus CRC warning.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-09 23:30:39 -06:00
..
cadmus.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
cadmus.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
cds_pci_ft.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
cds_via.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
eeprom.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
ics307_clk.c Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
ics307_clk.h Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
Makefile video: move fsl_diu_fb driver to drivers/video 2010-12-01 20:48:13 +01:00
ngpixis.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
ngpixis.h ppc/85xx: Add a structure defn for PIXIS registers 2010-07-16 10:55:08 -05:00
pixis.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
pixis.h ppc/85xx: Add a structure defn for PIXIS registers 2010-07-16 10:55:08 -05:00
pq-mds-pib.c ppc/85xx: Add PIB/ATM support for MPC8569mds 2010-01-25 22:13:26 -06:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
sgmii_riser.c fsl: Remove unnecessary debug printfs 2009-03-09 17:46:10 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sys_eeprom.c fsl: update CRC after setting EEPROM identifier 2011-02-09 23:30:39 -06:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00