Tom Rini 0a9e34056f gpio: omap: Drop 'method' parameter ... The "method" parameter was part of the original port of the driver from the kernel. At some point this may have been added to allow for future differentiation (as omap1 and omap2 have different GPIO IP blocks, so this wasn't an unreasonable thing to do). At this point however it's just extra overhead, so drop. Signed-off-by: Tom Rini <trini@konsulko.com>		2015-08-12 20:48:06 -04:00
..
arch-am33xx	gpio: am43xx: expand gpio support	2015-08-12 20:48:04 -04:00
arch-armada100	ARM: remove CONFIG_ARM926EJS defines	2014-11-20 11:28:25 -05:00
arch-armv7	ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S	2015-07-20 11:44:38 -07:00
arch-bcm281xx	usb: gadget: bcm_udc_otg files	2015-07-22 08:57:54 +02:00
arch-bcmcygnus	arm: bcmcygnus: Enable Ethernet support	2015-08-12 20:47:28 -04:00
arch-bcmnsp
arch-ep93xx
arch-exynos	exynos: video: Remove non-device-tree code	2015-08-05 21:06:17 -06:00
arch-fsl-lsch3	armv8/lsch3/config: Define USB XHCI controller base address for LS2085A	2015-08-03 12:06:39 -07:00
arch-hi6220	mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.	2015-08-12 20:48:01 -04:00
arch-imx	imx: mx6ul: Add i.MX6UL CPU type	2015-08-02 11:05:06 +02:00
arch-lpc32xx	nand: lpc32xx: add SLC NAND controller support	2015-08-12 20:47:33 -04:00
arch-ls102xa	Correct License and Copyright information on few files	2015-08-12 20:47:46 -04:00
arch-mvebu	arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h	2014-10-23 09:59:20 -04:00
arch-mx5	patch - arm - define SYS_CACHELINE_SIZE for mx5	2015-06-09 12:00:42 +02:00
arch-mx6	imx:mx6ul add dram spl configuration and header file	2015-08-02 11:05:09 +02:00
arch-mx25	i2c, mxc: rework i2c base address names for different SoCs	2015-05-26 14:17:00 +02:00
arch-mx27	i2c, mxc: rework i2c base address names for different SoCs	2015-05-26 14:17:00 +02:00
arch-mx31
arch-mx35	arm: mx35: use common timer functions	2014-09-16 12:53:09 +02:00
arch-mxs	arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode	2015-02-10 12:48:50 +01:00
arch-omap3	omap3: Reboot mode support	2015-08-12 20:47:36 -04:00
arch-omap4	omap: SPL boot devices cleanup and completion	2015-07-27 15:02:04 -04:00
arch-omap5	ARM: DRA7/ OMAP5: implement Auxiliary Control Register configuration	2015-08-12 20:47:50 -04:00
arch-orion5x	edminiv2: switch to SPL	2015-02-25 07:59:50 +01:00
arch-pxa
arch-rmobile	arm: rmobile: alt: Update to QoS revision 0.31 and 0.321	2015-06-01 08:56:34 +09:00
arch-s3c24x0	mtd: nand: s3c: Unify the register definition and naming	2014-11-26 23:21:43 -06:00
arch-s5pc1xx	dm: exynos: gpio: Convert to driver model	2014-10-22 10:36:36 -06:00
arch-sa1100
arch-spear
arch-stm32f1	ARMv7M: add STM32F1 support	2015-05-28 08:18:24 -04:00
arch-stm32f4	stm32f429: pass the device unique ID in DTB	2015-07-27 15:02:14 -04:00
arch-stv0991	stv0991: configure clock & pad muxing for qspi	2015-07-03 13:50:53 +05:30
arch-sunxi	sunxi: display: Add a few extra register and constant defines	2015-08-08 16:26:20 +02:00
arch-tegra	ARM: tegra: enable GPU DT node when appropriate	2015-08-06 10:50:03 -07:00
arch-tegra20	tegra: Move display controller header into common	2015-05-13 09:24:10 -07:00
arch-tegra30	ARM: ARM720t: remove empty asm/arch/hardware.h	2015-04-23 08:52:27 -04:00
arch-tegra114	ARM: ARM720t: remove empty asm/arch/hardware.h	2015-04-23 08:52:27 -04:00
arch-tegra124	tegra: Add missing tegra124 peripherals	2015-06-09 09:56:14 -07:00
arch-tegra210	Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.	2015-08-05 15:22:51 -07:00
arch-u8500
arch-vf610	i2c: fix vf610 support	2015-07-10 10:10:48 +02:00
arch-zynqmp	ARM: zynqmp: Wire up SATA for the board	2015-07-28 11:56:27 +02:00
armv8	armv8: Fix TCR macros for shareability attribute	2015-07-20 11:44:40 -07:00
imx-common	imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL	2015-08-02 11:05:08 +02:00
iproc-common
kona-common	bcm281xx: add support for "USB OTG clock"	2014-12-29 16:31:23 -05:00
proc-armv
ti-common	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
armv7.h	virt-dt: Allow reservation of secure region when in a RAM carveout	2015-05-13 09:24:14 -07:00
armv7m.h	ARM: Add ARMv7-M support	2015-04-22 12:14:55 -04:00
assembler.h	arm: build arch memset/memcpy in Thumb2 mode	2015-01-09 10:20:22 -05:00
atomic.h
bitops.h	arm: implement find_next_zero_bit function	2015-04-16 09:31:14 +02:00
bootm.h
byteorder.h
cache.h
config.h	ARMv8: enable pre-allocation malloc	2015-03-27 16:28:58 +01:00
davinci_rtc.h
dma-mapping.h	arm: asm: dma-mapping: added dma_free_coherent API	2015-04-14 05:48:09 +02:00
ehci-omap.h
emif.h	am33xx: Re-enable SW levelling for DDR2	2015-06-15 10:57:26 -04:00
errno.h
fsl_secure_boot.h	Add bootscript support to esbc_validate.	2015-04-21 10:19:19 -07:00
gic.h
global_data.h	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
gpio.h
hardware.h
io.h
linkage.h
mach-types.h	arm, at91: support for sam9260 based smartweb board	2015-08-12 20:47:28 -04:00
macro.h	Armv8: Initializing CNTVOFF_EL2	2015-04-16 11:27:15 +02:00
memory.h
omap_common.h	omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot	2015-07-27 15:02:06 -04:00
omap_gpio.h	gpio: omap: Drop 'method' parameter	2015-08-12 20:48:06 -04:00
omap_mmc.h
omap_musb.h
pl310.h	mx6: Set shared override bit in PL310 AUX_CTRL register	2015-05-15 19:21:24 +02:00
posix_types.h
processor.h
psci.h	ARM: Add board-specific initialization hook for PSCI	2015-05-13 09:24:15 -07:00
ptrace.h
sections.h
secure.h
setup.h
spl.h	arm: spl: Avoid setting up a duplicate global data structure	2015-03-04 14:55:04 -05:00
string.h
system.h	armv8: caches: Added routine to set non cacheable region	2015-07-31 01:38:12 +02:00
types.h	include: asm: types: add resource_size_t type	2015-04-14 05:48:09 +02:00
u-boot-arm.h	common: Move dram_init() declaration to common location	2015-02-09 15:08:48 +01:00
u-boot.h	Revert "break build if it would produce broken binary"	2015-07-07 11:39:36 +02:00
unaligned.h
utils.h