Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 22:03:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/renesas/v3msk/cpld.c
Valentine Barshak 5f4e26964c ARM: renesas: Add R8A77970 V3MSK board and CPLD code 
Add board code for the R8A77970 V3MSK board.
Add CPLD sysreset driver to the R-Car V3M SK board.
Extracted from a larger patch by Valentine Barshak.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync configs and board code with V3M Eagle, squash CPLD driver in]
2023-06-08 22:26:52 +02:00

368 lines
9.6 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* V3MSK board CPLD access support
*
* Copyright (C) 2019 Renesas Electronics Corporation
* Copyright (C) 2019 Cogent Embedded, Inc.
*
*/
#include <common.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <dm.h>
#include <errno.h>
#include <linux/err.h>
#include <sysreset.h>
#include <linux/delay.h>
#include <command.h>
#define CPLD_ADDR_PRODUCT_L 0x000 /* R */
#define CPLD_ADDR_PRODUCT_H 0x001 /* R */
#define CPLD_ADDR_CPLD_VERSION_D 0x002 /* R */
#define CPLD_ADDR_CPLD_VERSION_Y 0x003 /* R */
#define CPLD_ADDR_MODE_SET_L 0x004 /* R/W */
#define CPLD_ADDR_MODE_SET_H 0x005 /* R/W */
#define CPLD_ADDR_MODE_APPLIED_L 0x006 /* R */
#define CPLD_ADDR_MODE_APPLIED_H 0x007 /* R */
#define CPLD_ADDR_DIPSW 0x008 /* R */
#define CPLD_ADDR_RESET 0x00A /* R/W */
#define CPLD_ADDR_POWER_CFG 0x00B /* R/W */
#define CPLD_ADDR_PERI_CFG1 0x00C /* R/W */
#define CPLD_ADDR_PERI_CFG2 0x00D /* R/W */
#define CPLD_ADDR_LEDS 0x00E /* R/W */
#define CPLD_ADDR_PCB_VERSION 0x300 /* R */
#define CPLD_ADDR_SOC_VERSION 0x301 /* R */
#define CPLD_ADDR_PCB_SN_L 0x302 /* R */
#define CPLD_ADDR_PCB_SN_H 0x303 /* R */
#define MDIO_DELAY 10 /* microseconds */
#define CPLD_MAX_GPIOS 2
struct renesas_v3msk_sysreset_priv {
struct gpio_desc miso;
struct gpio_desc mosi;
struct gpio_desc mdc;
struct gpio_desc enablez;
/*
* V3MSK Videobox Mini board has CANFD PHY connected
* we must shutdown this chip to use bb pins
*/
struct gpio_desc gpios[CPLD_MAX_GPIOS];
};
static void mdio_bb_active_mdio(struct renesas_v3msk_sysreset_priv *priv)
{
dm_gpio_set_dir_flags(&priv->mosi, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
}
static void mdio_bb_tristate_mdio(struct renesas_v3msk_sysreset_priv *priv)
{
dm_gpio_set_dir_flags(&priv->mosi, GPIOD_IS_IN);
}
static void mdio_bb_set_mdio(struct renesas_v3msk_sysreset_priv *priv, int val)
{
dm_gpio_set_value(&priv->mosi, val);
}
static int mdio_bb_get_mdio(struct renesas_v3msk_sysreset_priv *priv)
{
return dm_gpio_get_value(&priv->miso);
}
static void mdio_bb_set_mdc(struct renesas_v3msk_sysreset_priv *priv, int val)
{
dm_gpio_set_value(&priv->mdc, val);
}
static void mdio_bb_delay(void)
{
udelay(MDIO_DELAY);
}
/* Send the preamble, address, and register (common to read and write) */
static void mdio_bb_pre(struct renesas_v3msk_sysreset_priv *priv,
u8 op, u8 addr, u8 reg)
{
int i;
/* 32-bit preamble */
mdio_bb_active_mdio(priv);
mdio_bb_set_mdio(priv, 1);
for (i = 0; i < 32; i++) {
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
}
/* send the ST (2-bits of '01') */
mdio_bb_set_mdio(priv, 0);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
mdio_bb_set_mdio(priv, 1);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
/* send the OP (2-bits of Opcode: '10'-read, '01'-write) */
mdio_bb_set_mdio(priv, op >> 1);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
mdio_bb_set_mdio(priv, op & 1);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
/* send the PA5 (5-bits of PHY address) */
for (i = 0; i < 5; i++) {
mdio_bb_set_mdio(priv, addr & 0x10); /* MSB first */
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
addr <<= 1;
}
/* send the RA5 (5-bits of register address) */
for (i = 0; i < 5; i++) {
mdio_bb_set_mdio(priv, reg & 0x10); /* MSB first */
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
reg <<= 1;
}
}
static int mdio_bb_read(struct renesas_v3msk_sysreset_priv *priv,
u8 addr, u8 reg)
{
int i;
u16 data = 0;
mdio_bb_pre(priv, 2, addr, reg);
/* tri-state MDIO */
mdio_bb_tristate_mdio(priv);
/* read TA (2-bits of turn-around, last bit must be '0') */
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
/* check the turnaround bit: the PHY should drive line to zero */
if (mdio_bb_get_mdio(priv) != 0) {
printf("PHY didn't drive TA low\n");
for (i = 0; i < 32; i++) {
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
}
/* There is no PHY, set value to 0xFFFF */
return 0xFFFF;
}
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
/* read 16-bits of data */
for (i = 0; i < 16; i++) {
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
data <<= 1;
data |= mdio_bb_get_mdio(priv);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
}
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
debug("cpld_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, data);
return data;
}
static void mdio_bb_write(struct renesas_v3msk_sysreset_priv *priv,
u8 addr, u8 reg, u16 val)
{
int i;
mdio_bb_pre(priv, 1, addr, reg);
/* send the TA (2-bits of turn-around '10') */
mdio_bb_set_mdio(priv, 1);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
mdio_bb_set_mdio(priv, 0);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
/* write 16-bits of data */
for (i = 0; i < 16; i++) {
mdio_bb_set_mdio(priv, val & 0x8000); /* MSB first */
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
val <<= 1;
}
/* tri-state MDIO */
mdio_bb_tristate_mdio(priv);
mdio_bb_set_mdc(priv, 0);
mdio_bb_delay();
mdio_bb_set_mdc(priv, 1);
mdio_bb_delay();
}
static u16 cpld_read(struct udevice *dev, u16 addr)
{
struct renesas_v3msk_sysreset_priv *priv = dev_get_priv(dev);
/* random flash reads require 2 reads: first read is unreliable */
if (addr >= CPLD_ADDR_PCB_VERSION)
mdio_bb_read(priv, addr >> 5, addr & 0x1f);
return mdio_bb_read(priv, addr >> 5, addr & 0x1f);
}
static void cpld_write(struct udevice *dev, u16 addr, u16 data)
{
struct renesas_v3msk_sysreset_priv *priv = dev_get_priv(dev);
mdio_bb_write(priv, addr >> 5, addr & 0x1f, data);
}
static int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
{
struct udevice *dev;
u16 addr, val;
int ret;
ret = uclass_get_device_by_driver(UCLASS_SYSRESET,
DM_DRIVER_GET(sysreset_renesas_v3msk),
&dev);
if (ret)
return ret;
if (argc == 2 && strcmp(argv[1], "info") == 0) {
printf("Product: 0x%08x\n",
(cpld_read(dev, CPLD_ADDR_PRODUCT_H) << 16) |
cpld_read(dev, CPLD_ADDR_PRODUCT_L));
printf("CPLD version: 0x%08x\n",
(cpld_read(dev, CPLD_ADDR_CPLD_VERSION_Y) << 16) |
cpld_read(dev, CPLD_ADDR_CPLD_VERSION_D));
printf("Mode setting (MD0..26): 0x%08x\n",
(cpld_read(dev, CPLD_ADDR_MODE_APPLIED_H) << 16) |
cpld_read(dev, CPLD_ADDR_MODE_APPLIED_L));
printf("DIPSW (SW4, SW5): 0x%02x, 0x%x\n",
(cpld_read(dev, CPLD_ADDR_DIPSW) & 0xff) ^ 0xff,
(cpld_read(dev, CPLD_ADDR_DIPSW) >> 8) ^ 0xf);
printf("Power config: 0x%08x\n",
cpld_read(dev, CPLD_ADDR_POWER_CFG));
printf("Periferals config: 0x%08x\n",
(cpld_read(dev, CPLD_ADDR_PERI_CFG2) << 16) |
cpld_read(dev, CPLD_ADDR_PERI_CFG1));
printf("PCB version: %d.%d\n",
cpld_read(dev, CPLD_ADDR_PCB_VERSION) >> 8,
cpld_read(dev, CPLD_ADDR_PCB_VERSION) & 0xff);
printf("SOC version: %d.%d\n",
cpld_read(dev, CPLD_ADDR_SOC_VERSION) >> 8,
cpld_read(dev, CPLD_ADDR_SOC_VERSION) & 0xff);
printf("PCB S/N: %d\n",
(cpld_read(dev, CPLD_ADDR_PCB_SN_H) << 16) |
cpld_read(dev, CPLD_ADDR_PCB_SN_L));
return 0;
}
if (argc < 3)
return CMD_RET_USAGE;
addr = simple_strtoul(argv[2], NULL, 16);
if (!(addr >= CPLD_ADDR_PRODUCT_L && addr <= CPLD_ADDR_LEDS)) {
printf("cpld invalid addr\n");
return CMD_RET_USAGE;
}
if (argc == 3 && strcmp(argv[1], "read") == 0) {
printf("0x%x\n", cpld_read(dev, addr));
} else if (argc == 4 && strcmp(argv[1], "write") == 0) {
val = simple_strtoul(argv[3], NULL, 16);
cpld_write(dev, addr, val);
}
return 0;
}
U_BOOT_CMD(cpld, 4, 1, do_cpld,
"CPLD access",
"info\n"
"cpld read addr\n"
"cpld write addr val\n"
);
static int renesas_v3msk_sysreset_request(struct udevice *dev, enum sysreset_t type)
{
cpld_write(dev, CPLD_ADDR_RESET, 1);
return -EINPROGRESS;
}
static int renesas_v3msk_sysreset_probe(struct udevice *dev)
{
struct renesas_v3msk_sysreset_priv *priv = dev_get_priv(dev);
if (gpio_request_by_name(dev, "gpio-miso", 0, &priv->miso,
GPIOD_IS_IN))
return -EINVAL;
if (gpio_request_by_name(dev, "gpio-mosi", 0, &priv->mosi,
GPIOD_IS_OUT))
return -EINVAL;
if (gpio_request_by_name(dev, "gpio-mdc", 0, &priv->mdc,
GPIOD_IS_OUT))
return -EINVAL;
if (gpio_request_by_name(dev, "gpio-enablez", 0, &priv->enablez,
GPIOD_IS_OUT))
return -EINVAL;
/* V3MSK Videobox Mini board has CANFD PHY connected
* we must shutdown this chip to use bb pins
*/
gpio_request_list_by_name(dev, "gpios", priv->gpios, CPLD_MAX_GPIOS,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
return 0;
}
static struct sysreset_ops renesas_v3msk_sysreset = {
.request = renesas_v3msk_sysreset_request,
};
static const struct udevice_id renesas_v3msk_sysreset_ids[] = {
{ .compatible = "renesas,v3msk-cpld" },
{ /* sentinel */ }
};
U_BOOT_DRIVER(sysreset_renesas_v3msk) = {
.name = "renesas_v3msk_sysreset",
.id = UCLASS_SYSRESET,
.ops = &renesas_v3msk_sysreset,
.probe = renesas_v3msk_sysreset_probe,
.of_match = renesas_v3msk_sysreset_ids,
.priv_auto = sizeof(struct renesas_v3msk_sysreset_priv),
};
Reference in a new issue View git blame Copy permalink