mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 12:45:42 +00:00
89983478bd
The current simplify lpc32xx gpio driver implementation assume a maximum of 32 GPIO per port; there are a total of 22 GPI, 24 GPO and 6 GPIO to managed on port 3. Update the driver to fix the following: 1) When requesting GPI_xx and GPO_xx on port 3 (xx is the same number) the second call to "gpio_request" will return -EBUSY. 2) The status of GPO_xx pin report the status of the corresponding GPI_xx pin when using the "gpio status" command. 3) The gpio driver may setup the direction register for the wrong gpio when calling "gpio_direction_input" (GPI_xx) or "gpio_direction_output" (GPO_xx) on port 3; the call to the direction is require to use the "gpio status" command. The following change were done in the driver: 1) port3 GPI are cache in a separate 32 bits in the array. 2) port3 direction register written only for GPIO pins. 3) port3 GPO & GPIO (as output) are read using "p3_outp_state". 4) LPC32XX_GPI_P3_GRP updated to match the change. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
40 lines
1.2 KiB
C
40 lines
1.2 KiB
C
/*
|
|
* LPC32xx GPIO interface macro for pin mapping.
|
|
*
|
|
* (C) Copyright 2015 DENX Software Engineering GmbH
|
|
* Written-by: Sylvain Lemieux <slemieux@@tycoint.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _LPC32XX_GPIO_GRP_H
|
|
#define _LPC32XX_GPIO_GRP_H
|
|
|
|
/*
|
|
* Macro to map the pin for the lpc32xx_gpio driver.
|
|
* Note: - GPIOS are considered here as homogeneous and linear from 0 to 159;
|
|
* mapping is done per register, as group of 32.
|
|
* (see drivers/gpio/lpc32xx_gpio.c for details).
|
|
* - macros can be use with the following pins:
|
|
* P0.0 - P0.7
|
|
* P1.0 - P1.23
|
|
* P2.0 - P2.12
|
|
* P3 GPI_0 - GPI_9 / GPI_15 - GPI_23 / GPI_25 / GPI_27 - GPI_28
|
|
* P3 GPO_0 - GPO_23
|
|
* P3 GPIO_0 - GPIO_5 (output register only)
|
|
*/
|
|
#define LPC32XX_GPIO_P0_GRP 0
|
|
#define LPC32XX_GPIO_P1_GRP 32
|
|
#define LPC32XX_GPIO_P2_GRP 64
|
|
#define LPC32XX_GPO_P3_GRP 96
|
|
#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPO_P3_GRP + 25)
|
|
#define LPC32XX_GPI_P3_GRP 128
|
|
|
|
/*
|
|
* A specific GPIO can be selected with this macro
|
|
* ie, GPIO P0.1 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P0_GRP, 1)
|
|
* See the LPC32x0 User's guide for GPIO group numbers
|
|
*/
|
|
#define LPC32XX_GPIO(x, y) ((x) + (y))
|
|
|
|
#endif /* _LPC32XX_GPIO_GRP_H */
|