u-boot/arch/arm
Kever Yang 077eb31514 rockchip: pinctrl: rk3328: do not set io routing
In rk3328, some function pin may have more than one choice, and muxed
with more than one IO, for example, the UART2 controller IO,
TX and RX, have 3 choice(setting in com_iomux):
- M0 which mux with GPIO1A0/GPIO1A1
- M1 which mux with GPIO2A0/GPIO2A1
- usb2phy which mux with USB2.0 DP/DM pin.

We should not decide which group to use in pinctrl driver,
for it may be different in different board, it should goes to board
file, and the pinctrl file should setting correct iomux depends on
the com_iomux value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-06-07 07:29:21 -06:00
..
cpu armv7m: Fix larger builds 2017-06-05 14:13:14 -04:00
dts rockchip: rk3368: Add PX5 Evaluation board 2017-06-07 07:29:20 -06:00
imx-common Convert CONFIG_CMD_HDMIDETECT to Kconfig 2017-05-22 12:45:22 -04:00
include rockchip: pinctrl: rk3328: do not set io routing 2017-06-07 07:29:21 -06:00
lib arm: Add Kconfig symbols used for Linux asm compatibility 2017-06-05 14:13:13 -04:00
mach-aspeed aspeed: Refactor SCU to use consistent mask & shift 2017-05-08 11:57:35 -04:00
mach-at91 Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD 2017-05-15 10:40:05 -04:00
mach-bcm283x bcm2835_wdt: support for the BCM2835/2836 watchdog 2017-05-09 20:30:08 -04:00
mach-davinci common: arm: davinci: Move header file out of common 2017-06-05 12:31:23 -04:00
mach-exynos Kconfig: Finish migration of hashing commands 2017-05-31 19:38:14 -04:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone Convert CONFIG_SPL_BOARD_INIT to Kconfig 2017-05-22 07:29:48 -04:00
mach-kirkwood Kconfig: Add a CONFIG_IDE option 2017-05-22 12:45:27 -04:00
mach-meson board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
mach-mvebu dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
mach-omap2 arm: Include asm/setup.h explictly 2017-06-05 11:02:37 -04:00
mach-orion5x board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
mach-rmobile ARM: rmobile: Move address of IICDVFS(I2C) to rcar-gen3-base.h 2017-05-22 15:07:31 +09:00
mach-rockchip rockchip: rk3368: Add PX5 Evaluation board 2017-06-07 07:29:20 -06:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
mach-socfpga Convert CONFIG_SPL_BOARD_INIT to Kconfig 2017-05-22 07:29:48 -04:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 stm32f7: configure mpu valid for f7 family 2017-05-12 08:37:08 -04:00
mach-sunxi sunxi: enable automatic FIT build for 64-bit SoCs 2017-05-17 23:23:25 +05:30
mach-tegra fdt: Rename a few functions in fdt_support 2017-06-01 07:03:11 -06:00
mach-uniphier dm: Fix up inclusion of common.h 2017-06-01 07:03:03 -06:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq zynq: Move zynq to clock framework 2017-02-17 10:22:46 +01:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk arm: Always keep the dtb section on objcopy 2017-06-05 14:13:11 -04:00
Kconfig arm: Add Kconfig symbols used for Linux asm compatibility 2017-06-05 14:13:13 -04:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig 2017-04-27 16:49:08 -04:00