u-boot/include/configs/tplink_wdr4300.h
Paul Burton ace3be4f15 MIPS: Move cache sizes to Kconfig
Move details of the L1 cache line sizes & total sizes into Kconfig,
defaulting to 0. A new CONFIG_SYS_CACHE_SIZE_AUTO Kconfig entry is
introduced to allow platforms to select auto-detection of cache sizes,
and it defaults to being enabled if none of the cache sizes are set by
the configuration (ie. sizes are all the default 0), and code is
adjusted to #ifdef on that rather than on the definition of the sizes
(which will always be defined even if 0).

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-31 09:44:24 +02:00

86 lines
2.2 KiB
C

/*
* Copyright (C) 2016 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_MHZ 280
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN 0x40000
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0xa0000000
#define CONFIG_SYS_LOAD_ADDR 0xa1000000
#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
/*
* Serial Port
*/
#define CONFIG_SYS_NS16550_CLK 40000000
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{9600, 19200, 38400, 57600, 115200}
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
#define CONFIG_BOOTCOMMAND \
"dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr"
#define CONFIG_LZMA
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE 0x10000
/*
* Command
*/
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Boot argument buffer size */
#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
#define CONFIG_AUTO_COMPLETE /* Command auto complete */
#define CONFIG_CMDLINE_EDITING /* Command history etc */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
/* USB, USB storage, USB ethernet */
#define CONFIG_EHCI_MMIO_BIG_ENDIAN
#define CONFIG_EHCI_DESC_BIG_ENDIAN
#define CONFIG_EHCI_IS_TDI
#define CONFIG_DOS_PARTITION
/*
* Diagnostics
*/
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x83f00000
#define CONFIG_CMD_MEMTEST
#define CONFIG_USE_PRIVATE_LIBGCC
#define CONFIG_CMD_MII
#define CONFIG_PHY_GIGE
#endif /* __CONFIG_H */