Nishanth Menon e52e334e5c ARM: DRA7: Add ABB setup for all domains ... ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>		2016-04-25 15:10:41 -04:00
..
clock.h	ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2	2015-08-28 12:33:19 -04:00
cpu.h	bitops: introduce BIT() definition	2015-09-11 17:15:32 -04:00
dra7xx_iodelay.h	ARM: OMAP5/DRA7: Expose do_set_iodelay	2016-03-27 09:12:15 -04:00
ehci.h	arm: omap5: echi: Add GPL-2.0+ SPDX-License-Identifier	2013-09-20 10:30:54 -04:00
gpio.h	SPDX-License-Identifier: fixing some problematic GPL-2.0 files	2013-08-19 15:34:13 -04:00
hardware.h	ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi	2015-08-17 23:29:15 +05:30
i2c.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mem.h	board/ti/dra7xx: add support for parallel NOR	2014-08-25 10:48:12 -04:00
mmc_host_def.h	omap: consolidate common mmc definitions	2013-03-08 16:41:12 -05:00
mux_dra7xx.h	ARM: DRA7: Add support for manual mode configuration	2015-06-12 13:02:05 -04:00
mux_omap5.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
omap.h	ARM: DRA7: Add ABB setup for all domains	2016-04-25 15:10:41 -04:00
sata.h	ARM: O5/dra7xx: Add SATA boot support	2014-02-19 10:47:45 -05:00
spl.h	omap: SPL boot devices cleanup and completion	2015-07-27 15:02:04 -04:00
sys_proto.h	omap-common: Rename set_muxconf_regs_essential to set_muxconf_regs	2016-03-15 15:12:06 -04:00