mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
dbd2a382c1
The Zyxel NSA310s board has the network chip Marvell Alaska 88E1318S. Use uclass mvgbe and the compatible driver M88E1310 driver to bring up Ethernet. - Use uclass mvgbe to bring up the network. And remove ad-hoc code. - Remove CONFIG_RESET_PHY_R. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Add phy mode RGMII to kirkwood-nsa310s.dts - Miscellaneous changes: Move constants to .c file and remove header file board/zyxel/nsa310s/nsa310s.h, add support for large USB and SATA HDDs, use BIT macro, add/cleanup comments, and cosmetic changes. Note that this patch is depended on the following patch: https://patchwork.ozlabs.org/project/uboot/patch/20220412201820.10291-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
113 lines
2.1 KiB
C
113 lines
2.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015, 2021-2022 Tony Dinh <mibodhi@gmail.com>
|
|
* Copyright (C) 2015 Gerald Kerma <dreagle@doukki.net>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/arch/mpp.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* low GPIO's
|
|
*/
|
|
#define HDD1_GREEN_LED BIT(16)
|
|
#define HDD1_RED_LED BIT(13)
|
|
#define USB_GREEN_LED BIT(15)
|
|
#define USB_POWER BIT(21)
|
|
#define SYS_GREEN_LED BIT(28)
|
|
#define SYS_ORANGE_LED BIT(29)
|
|
|
|
#define COPY_GREEN_LED BIT(22)
|
|
#define COPY_RED_LED BIT(23)
|
|
|
|
#define PIN_USB_GREEN_LED 15
|
|
#define PIN_USB_POWER 21
|
|
|
|
#define NSA310S_OE_LOW (~(0))
|
|
#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER)
|
|
|
|
/*
|
|
* high GPIO's
|
|
*/
|
|
#define HDD2_GREEN_LED BIT(2)
|
|
#define HDD2_POWER BIT(1)
|
|
|
|
#define NSA310S_OE_HIGH (~(0))
|
|
#define NSA310S_VAL_HIGH (HDD2_POWER)
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/*
|
|
* default gpio configuration
|
|
* There are maximum 64 gpios controlled through 2 sets of registers
|
|
* the below configuration configures mainly initial LED status
|
|
*/
|
|
mvebu_config_gpio(NSA310S_VAL_LOW, NSA310S_VAL_HIGH,
|
|
NSA310S_OE_LOW, NSA310S_OE_HIGH);
|
|
|
|
/* (all LEDs & power off active high) */
|
|
/* Multi-Purpose Pins Functionality configuration */
|
|
static const u32 kwmpp_config[] = {
|
|
MPP0_NF_IO2,
|
|
MPP1_NF_IO3,
|
|
MPP2_NF_IO4,
|
|
MPP3_NF_IO5,
|
|
MPP4_NF_IO6,
|
|
MPP5_NF_IO7,
|
|
MPP6_SYSRST_OUTn,
|
|
MPP7_GPO,
|
|
MPP8_TW_SDA,
|
|
MPP9_TW_SCK,
|
|
MPP10_UART0_TXD,
|
|
MPP11_UART0_RXD,
|
|
MPP12_GPO,
|
|
MPP13_GPIO,
|
|
MPP14_GPIO,
|
|
MPP15_GPIO,
|
|
MPP16_GPIO,
|
|
MPP17_GPIO,
|
|
MPP18_NF_IO0,
|
|
MPP19_NF_IO1,
|
|
MPP20_GPIO,
|
|
MPP21_GPIO,
|
|
MPP22_GPIO,
|
|
MPP23_GPIO,
|
|
MPP24_GPIO,
|
|
MPP25_GPIO,
|
|
MPP26_GPIO,
|
|
MPP27_GPIO,
|
|
MPP28_GPIO,
|
|
MPP29_GPIO,
|
|
MPP30_GPIO,
|
|
MPP31_GPIO,
|
|
MPP32_GPIO,
|
|
MPP33_GPIO,
|
|
MPP34_GPIO,
|
|
MPP35_GPIO,
|
|
0
|
|
};
|
|
kirkwood_mpp_conf(kwmpp_config, NULL);
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(struct bd_info *bis)
|
|
{
|
|
return cpu_eth_init(bis);
|
|
}
|