Paul Kocialkowski 5e56b0a80e omap-common: clocks-common: Setup USB DPLL when MUSB is in use ... On (at least) OMAP4, the USB DPLL is required to be setup for the internal PHY to work properly. The internal PHY is used by default with the MUSB USB OTG controller. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>		2016-03-15 15:12:49 -04:00
..
abb.c	replace DIV_ROUND with DIV_ROUND_CLOSEST	2014-11-20 11:28:25 -05:00
boot-common.c	omap3: Use raw SPL by default for mmc1	2016-03-08 15:01:46 -05:00
clocks-common.c	omap-common: clocks-common: Setup USB DPLL when MUSB is in use	2016-03-15 15:12:49 -04:00
emif-common.c	ARM: DRA7: emif: Enable interleaving for higher address space	2016-03-14 19:18:47 -04:00
hwinit-common.c	omap-common: Remove deprecated arch_cpu_init code	2016-03-15 15:12:46 -04:00
lowlevel_init.S	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
Makefile	arm: omap-common: do not build timer when CONFIG_TIMER defined	2016-01-20 19:06:21 -07:00
mem-common.c	ARM: omap: clean redundant PISMO_xx macros used in OMAP3	2014-07-25 16:26:12 -04:00
omap-cache.c	am33xx/omap: Allow cache enable for all Sitara/OMAP	2014-06-11 16:25:39 -04:00
pipe3-phy.c	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
pipe3-phy.h	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
reset.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
sata.c	ahci: mmio_base is a virtual address	2015-04-18 16:54:29 -04:00
timer.c	omap-common/hwinit-common.c: timer_init() doesn't need to touch gd	2015-01-05 15:13:45 -05:00
u-boot-spl.lds	arm: Add missing .vectors section to linker scripts	2014-08-30 07:46:41 -04:00
utils.c	armv7: Add missing newline after OMAP die ID	2016-01-20 10:19:38 -05:00
vc.c	ARM: OMAP4+: pmic: Make generic bus init and write functions	2013-06-10 08:43:09 -04:00