u-boot/arch/powerpc/dts/km8321.dtsi
Heiko Schocher 7bdfe85929 mpc83xx, keymile boards: enable DM_ETH and add DTS
enable DTS support for keymile mpc83xx based boards.

get rid of compile warning:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Therefore done:
- add DTS for all mpc83xx based boards from keymile
  mainly they are not mainlined to linux.
- add u-boot specific dtsi
- add stdout-path
- add missing ucc4 par_io definitions, which were
  in board code, but not in linux DTS
- remove not used ethernet nodes

Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>

Series-to: u-boot

Series-version: 3

Series-changes: 3
- rebase patchset to current mainline commit
  c0192950df
- update defconfig files

Series-changes: 2
- add patch which fixes Codingstyle errors in drivers/qe
- add patch which converts the mpc83xx based boards from
  keymile to DM_ETH

Cover-letter:
powerpc, mpc83xx: add DM_ETH support

This patch series adds DM ethernet support for mpc83xx based
keymile boards.

Travis build:

END
2020-09-17 06:09:54 +02:00

220 lines
4.8 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* ABB PGGA km8321 common ports Device Tree Source
*
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
*
*/
/dts-v1/;
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8321@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <16384>; // L1, 16K
i-cache-size = <16384>; // L1, 16K
timebase-frequency = <66000000>;
bus-frequency = <264000000>;
clock-frequency = <528000000>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
soc: soc8321@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <264000000>;
i2c0: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl,mpc8313-i2c","fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <100000>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8321-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8321-dma-channel",
"fsl,elo-dma-channel";
reg = <0 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8321-dma-channel",
"fsl,elo-dma-channel";
reg = <0x80 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8321-dma-channel",
"fsl,elo-dma-channel";
reg = <0x100 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8321-dma-channel",
"fsl,elo-dma-channel";
reg = <0x180 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
ipic: pic@700 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "fsl,pq2pro-pic", "fsl,ipic";
interrupt-controller;
reg = <0x700 0x100>;
device_type = "ipic";
};
par_io: par_io@1400 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1400 0x100>;
ranges;
device_type = "par_io";
num-ports = <7>;
qe_pio_d: gpio-controller@48 {
#gpio-cells = <2>;
compatible = "fsl,mpc8360-qe-pario-bank",
"fsl,mpc8323-qe-pario-bank";
reg = <0x1448 0x18>;
gpio-controller;
};
};
};
qe: qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0xe0100000 0x00100000>;
reg = <0xe0100000 0x480>;
brg-frequency = <0>;
bus-frequency = <396000000>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x00010000 0x00004000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x4000>;
};
};
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
enet_piggy2: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <4>;
reg = <0x3200 0x200>;
interrupts = <35>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
phy-handle = <&phy_piggy2>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc4>;
};
mdio: mdio@3320 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3320 0x18>;
compatible = "fsl,ucc-mdio";
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
phy_piggy2: ethernet-phy@00 {
reg = <0x0>;
device_type = "ethernet-phy";
};
};
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
big-endian;
interrupts = <32 8 33 8>;
interrupt-parent = <&ipic>;
};
bootcount@0x13ff8 {
device_type = "bootcount";
compatible = "u-boot,bootcount";
reg = <0x13ff8 0x08>;
};
spi0: spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "qe";
#address-cells = <1>;
#size-cells = <0>;
pio-handle = <&pio_spi>;
};
};
localbus: localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8321-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
};
};
#include "km8321-uboot.dtsi"