Commit graph

76 commits

Author SHA1 Message Date
Samuel Dionne-Riel
ec57bd7454 cmd: env: Add indirect to indirectly set values
This allows an ergonomic-enough approximation of ${!variable} expansion.
This could be used the following way:

```
for target in ${boot_targets}; do
   env indirect target_name target_name_${target}
   # ...
done
```

Assuming `target_name_mmc0` and similar are set appropriately.

A default value can be optionally provided.

Note: this acts on environment variables, not hush variables.

Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: "Marek Behún" <marek.behun@nic.cz>
[trini: Don't enable by default]
2022-04-07 16:50:42 -04:00
Marek Behún
f231566475 env: Move non-cli env functions to env/common.c
Move the following functions from cmd/nvedit.c to env/common.c:
  env_set_ulong()
  env_set_hex()
  env_get_hex()
  eth_env_get_enetaddr()
  eth_env_set_enetaddr()
  env_get()
  from_env()
  env_get_f()
  env_get_ulong()
since these functions are not specific for U-Boot's CLI.

We leave env_set() in cmd/nvedit.c, since it calls _do_env_set(), which
is a static function in that file.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
a80652ebb3 env: Simplify env_match() and inline into env_get_f()
In the past the env_match() function was used to match envs with
- name, i.e. string "name"
- variable assignment, i.e. string "name=other_value"

The latter is not the case anymore, since the env_match() function is
now used only in env_get_f(), and so we can simplify the function into
a simple strncmp() with an additional comparison to '='.

Let's do this, and since the resulting function is quite simple, let's
also inline its code into env_get_f().

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
a473766cce env: Use memcpy() instead of ad-hoc code to copy variable value
Copy the value of the found variable into given buffer with memcpy()
instead of ad-hoc code.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
3112ce0ce8 env: Make return value of env_get_f() behave like sprintf() on success
Currently the env_get_f() function's return value behaves weirdly: it
returns the number of bytes written into `buf`, but whether this is
excluding the terminating NULL-byte or including it depends on whether
there was enough space in `buf`.

Change the function to always return the actual length of the value of
the environment variable (excluding the terminating NULL-byte) on
success. This makes it behave like sprintf().

All users of this function in U-Boot are compatible with this change.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
6b6e3eeba9 env: Early return from env_get_f() on NULL name
Test non-NULL name immediately, not in env_match().

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
6ba4473fb7 env: Don't match empty variable name in env_match()
Do we really allow zero-length variable name? I guess not.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
d1bca8d2a1 env: Use better name for variable in env_get_f()
The `nxt` variable actually points to the terminating null-byte of the
current env var, and the next env var is at `nxt + 1`, not `nxt`. So a
better name for this variable is `end`.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
eff73b2eed env: Use string pointer instead of indexes in env_get_f()
Since we no longer use env_get_char() to access n-th character of
linearized environment data, but rather access the arrays themselves, we
can convert the iteration to use string pointers instead of position
indexes.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
52f9ed34cb env: Inline env_get_char() into its only user
This function is a relic from the past when environment was read from
underlying device one character at a time.

It is used only in the case when getting an environemnt variable prior
relocation, and the function is simple enough to be inlined there.

Since env_get_char() is being changed to simple access to an array, we
can drop the failing cases and simplify the code (this could have been
done before, since env_get_char() did not fail even before).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
7b611ee90e env: Change env_match() to static and remove from header
This function was used by other parts of U-Boot in the past when
environment was read from underlying device one character at a time.

This is not the case anymore.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Simon Glass
0b1284eb52 global: Convert simple_strtoul() with decimal to dectoul()
It is a pain to have to specify the value 10 in each call. Add a new
dectoul() function and update the code to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Simon Glass
96434a76fd env: Allow returning errors from hdelete_r()
At present this function returns 1 on success and 0 on failure. But in
the latter case it provides no indication of what went wrong.

If an attempt is made to delete a non-existent variable, the caller may
want to ignore this error. This happens when setting a non-existent
variable to "", for example.

Update the function to return 0 on success and a useful error code on
failure. Add a function comment too.

Make sure that env_set() does not return an error if it is deleting a
variable that doesn't exist. We could update env_set() to return useful
error numbers also, but that is beyond the scope of this change.

Signed-off-by: Simon Glass <sjg@chromium.org>

wip
2020-12-04 16:09:06 -05:00
Maxim Uvarov
8f0ac536d4 efi: change 'env -e -i' usage syntax
'env -e -i' syntax was changed from "," to ":". Account for this also
in the documentation.

Fixes: 2b3fbcb59f ("efi_loader: use ':' as separator for setenv -i")
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Correct the usage description for setenv -e too.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18 22:23:58 +02:00
Pedro Aguilar
142775a52b env: Crash in 'env import' when using checksum and a specific size
This patch adds a sanity check that avoids 'size' to overflow and crash when
importing an environment that contains a checksum. Example with the wrong size
that causes the crash:

=> env import -c 0x4100000 3 v1

This assumes that v1 has already been successfully exported with
'env export -c -s 0x100 0x4100000 v1'

Signed-off-by: Pedro Aguilar <pedro.aguilar@vimar.com>
2020-09-11 17:13:56 -04:00
Patrick Delaunay
a97d22ebba cmd: env: add env select command
Add the new command 'env select' to force the persistent storage
of environment, saved in gd->env_load_prio.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
0115dd3a6a cmd: env: add env load command
Add the new command env load to load the environment from
the current location gd->env_load_prio.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
2f96b3238c cmd: env: check real location for env info command
Check the current ENV location, dynamically provided by the weak
function env_get_location to be sure that the environment can be
persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board
dynamically select the available storage location (according boot
device for example).

This patch solves issue for stm32mp1 platform, when the boot device
is USB.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
6718ebd032 cmd: env: add option for quiet output on env info
The "env info" can be use for test with -d and -p parameter,
in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default
environment is used and persistent storage is managed with:
  if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces
First boot:
      Default environment is used
      Environment can be persisted
      Saving Environment to EXT4... File System is consistent

Next boot:
      Environment was loaded from persistent storage
      Environment can be persisted

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-26 14:35:30 -04:00
Heinrich Schuchardt
c70f44817d efi_loader: simplify 'printenv -e'
Currently default output of 'printenv -e' is restricted to variables with
GUID EFI_GLOBAL_VARIABLE. This excludes db and dbx. As the number of
variables is small there is no need for this restriction.

If no GUID is provided, print all matching variables irrespective of GUID.

Always show the numeric value of the GUID.

If the GUID provided to 'setenv -e' is invalid, return CMD_RET_USAGE.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16 12:37:03 +02:00
Patrick Delaunay
8b5206d9e4 cmd: env: use ENV_IS_IN_DEVICE in env info
Use the define ENV_IS_IN_DEVICE to test if one the
CONFIG_ENV_IS_IN_...  is defined and correct the detection of
persistent storage support in the command "env info"
if CONFIG_ENV_IS_NOWHERE is activated.

Since commit 60d5ed2593c9 ("env: allow ENV_IS_NOWHERE with
other storage target") test CONFIG_ENV_IS_NOWHERE is not
enough; see also commit 953db29a1e9c6 ("env: enable saveenv
command when one CONFIG_ENV_IS_IN is activated").

This patch avoids issue for this command in stm32mp1 platform.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
AKASHI Takahiro
e50e2878b2 cmd: env: add "-at" option to "env set -e" command
With "-at" option, EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS
will be passed to SetVariable() to authenticate the variable.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-04-16 08:12:47 +02:00
Joe Hershberger
fb8977c5be net: Always build the string_to_enetaddr() helper
Part of the env cleanup moved this out of the environment code and into
the net code. However, this helper is sometimes needed even when the net
stack isn't included.

Move the helper to lib/net_utils.c like it's similarly-purposed
string_to_ip(). Also rename the moved function to similar naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Ondrej Jirman <megous@megous.com>
2019-12-09 09:47:41 -06:00
Patrice Chotard
1ac2cb9741 cmd: Migrate from_env() from pxe.c to nvedit.c
Migrate from_env() from pxe.c to nvedit.c as it's not pxe specific.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-12-06 16:44:18 -05:00
Simon Glass
3db7110857 crc32: Use the crc.h header for crc functions
Drop inclusion of crc.h in common.h and use the correct header directly
instead.

With this we can drop the conflicting definition in fw_env.h and rely on
the crc.h header, which is already included.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:08 -05:00
AKASHI Takahiro
051aa89f46 cmd: env: extend "env [set|print] -e" to manage UEFI variables
With this patch, when setting UEFI variable with "env set -e" command,
we will be able to
- specify vendor guid with "-guid guid",
- specify variable attributes,  BOOTSERVICE_ACCESS, RUNTIME_ACCESS,
  respectively with "-bs" and "-rt",
- append a value instead of overwriting with "-a",
- use memory as variable's value instead of explicit values given
  at the command line with "-i address,size"

If guid is not explicitly given, default value will be used.

Meanwhile, "env print -e," will be modified so that it will NOT dump
a variable's value if '-n' is specified.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-30 17:49:41 +01:00
Simon Glass
f3998fdc4d env: Rename environment.h to env_internal.h
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.

Rename this file and add a comment at the top to indicate its internal
nature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11 19:27:31 -04:00
Simon Glass
3f0d680745 env: Drop the ACTION typedef
Avoid using a typedef here which is unnecessary. Add an 'env_' prefix to
both the enum and its members to make it clear that these are related to
the environment.

Add an ENV prefix to these two flags so that it is clear what they relate
to. Also move them to env.h since they are part of the public API. Use an
enum rather than a #define to tie them together.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
d3716dd64b env: Rename the redundancy flags
Add an ENV prefix to these two flags so that it is clear what they relate
to. Also move them to env.h since they are part of the public API. Use an
enum rather than a #define to tie them together.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
dd2408cac1 env: Drop the ENTRY typedef
U-Boot is not supposed to use typedef for structs anymore. Also this name
is the same as the ENTRY() macro used in assembler files, and 'entry'
itself is widely used in U-Boot (>8k matches).

Drop the typedef and rename the struct to env_entry to reduce confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Simon Glass
0ac7d722ed env: Move get/set_default_env() to env.h
Move these functions to the new header file and rename set_default_env()
to env_set_default() so that it has a consistent env_ prefix.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
0b9d8a0556 env: Move set_default_vars to env.h
Move this function to the new header file and rename it so it has an env_
prefix.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
36c8b143c0 env: net: Move eth_parse_enetaddr() to net.c/h
This function fits better with the network subsystem, so move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Simon Glass
b9ca02c2d5 env: Move envmatch() to env.h
Move envmatch() over to the new header file. Also rename it to env_match()
to better line up with other functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Simon Glass
f1f0ae6a9c env: Move get_env_id() to env.h
Move this function over to the new header file. Also rename it to have an
env_ prefix like the other functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Frank Wunderlich
cd121bdb6d env: register erase command
this patch adds basic changes for adding a erase-subcommand to env

with this command the environment stored on non-volatile storage written
by saveenv can be cleared.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>

squashed fixes
 - start message with "Erasing"
 - mark erase-function as optional
 - env: separate eraseenv from saveenv

Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-18 11:31:25 -04:00
Leo Ruan
8e92120b32 cmd: nvedit: Add sub-command 'env info'
Add sub-command 'env info' to display environment information:
- env_valid : is environment valid
- env_ready : is environment imported into hash table
- env_use_default : is default environment using

This command can be optionally used for evaluation in scripts:
[-d] : evaluate whether default environment is used
[-p] : evaluate whether environment can be persisted
The result of multiple evaluations will be combined with AND.

Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Do not enable by default]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-13 11:11:09 -04:00
Tom Rini
2702646bc0 - Add Ethernet support for STM32MP1
- Add saveenv support for STM32MP1
 - Add STM32MP1 Avenger96 board support
 - Add SPI driver suport for STM32MP1
 - Add watchdog support for STM32MP1
 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJc+TqsAAoJEMrHeC97M/+miKwP/3OouX3slblEfUELRj/9qLlU
 ypdUDKDQupGSrTIyhJHFdGbA2ct/ERl4mH/kU8NNeCHVCsdvrrmuw+k4jfVZfIyi
 d9gWmU5WanNPzdWwdo0NrVNXjN5LPduxeUCYHdDEggDJuG3YL4LA9pPyrWpL8o8t
 tLPr8YMB1u5Ab8Vn/1A9lKvmw98V59LmWVxZh0AtAdOTvWgEZQe1R5Vex+MHacnK
 uR/Dm3ry5v7ZlR/kMZ0C+Ip1aw9GU4e+O+LCGlU4Jr0GV2XQOr4ehxWtN02nYubc
 sYXbkW7UArR0I0g8YPXPoBI9PToi57bHW/TXKoI8yDIll7vZ9PDjT/FbUJM9rv72
 WU6T7+K2DeHflmp4NljiesD2rDnti0XSCbe4o5o/jD+YkzH6YoJbco4nsae7TBSM
 R3rgV7/+St7zC1IjFq0TUG+S9qSUmZqA4k66+j5/SS6pLQOW3dYemL0/up2cRX5w
 dx00JTQkHyh7Q/GfH8r7yZqIToW9djB9HeT88ovPUCh8rVfDqNn8/WKd2JAfkxda
 QiZDs49BMBsnWpK+vPqiq/suoJeSwDB70iMzrGgBg+mTd9eJcD0c5QBURYE0jm2H
 GqQ04WNi8sLzULhMqKbBdPZhBMzyNmDXF6MC+y/OcUM5k8z6tY8LDro3wgHXWVpX
 DLiFVbkHbLhlUJbeO8dD
 =2C9f
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-boot

- Add Ethernet support for STM32MP1
- Add saveenv support for STM32MP1
- Add STM32MP1 Avenger96 board support
- Add SPI driver suport for STM32MP1
- Add watchdog support for STM32MP1
- Update power supply check via USB TYPE-C for STM32MP1 discovery board
2019-06-11 17:22:22 -04:00
Patrick Delaunay
2643c85da2 env: enable saveenv command when one CONFIG_ENV_IS_IN is activated
Introduce ENV_IS_IN_DEVICE to test if one the
CONFIG_ENV_IS_IN_ is defined and support the command
saveenv even if CONFIG_ENV_IS_NOWHERE is activated

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-06 17:40:13 +02:00
AKASHI Takahiro
4b27a76132 cmd: env: add -nv option for UEFI non-volatile variable
With this option, -nv, at "setenv -e" command, a variable will be defined
as non-volatile.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 23:56:14 +02:00
AKASHI Takahiro
49d81fdfb8 cmd: env: add "-e" option for handling UEFI variables
"env [print|set] -e" allows for handling uefi variables without
knowing details about mapping to corresponding u-boot variables.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
Heinrich Schuchardt
82919517fb cmd: nvedit: use correct format code
len is defined as unsigned. So use %u for printf().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-01-15 15:28:43 -05:00
Neil Stainton
d71b029d1d cmd: env: Fix CRC calculation for 'env export -c -s'
Fix failure to reimport exported checksummed, size constrained data block.

'env export -c' command ignores optional -s size argument when calculating checksum causing subsequent 'env import -c' to fail.

Signed-off-by: Neil Stainton <nstainton@asl-control.co.uk>
2018-09-30 13:00:23 -04:00
Quentin Schulz
eaf734724f cmd: nvedit: env import can now import only variables passed as parameters
While the `env export` can take as parameters variables to be exported,
`env import` does not have such a mechanism of variable selection.

Let's add the ability to add parameters at the end of the command for
variables to be imported.

Every env variable from the env to be imported passed by parameter to
this command will override the value of the variable in the current env.

If a variable exists in the current env but not in the imported env, if
this variable is passed as a parameter to env import, the variable will
be unset ONLY if the -d option is passed to env import, otherwise the
current value of the variable is kept.

If a variable exists in the imported env, the variable in the current
env will be set to the value of the one from the imported env.

All the remaining variables are left untouched.

As the size parameter of env import is positional but optional, let's
add the possibility to use the sentinel '-' for when we don't want to
give the size parameter (when the env is '\0' terminated) but we pass a
list of variables at the end of the command.

env import addr
env import addr -
env import addr size
env import addr - foo1 foo2
env import addr size foo1 foo2

are all valid.

env import -c addr
env import -c addr -
env import -c addr - foo1 foo2

are all invalid because they don't pass the size parameter required for
checking, while the following are valid.

env import addr size
env import addr size foo1 foo2

Nothing's changed for the other parameters or the overall behaviour.

One of its use case could be to load a secure environment from the
signed U-Boot binary and load only a handful of variables from an
other, unsecure, environment without completely losing control of
U-Boot.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Tested-by: Alex Kiernan <alex.kiernan@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2018-07-20 15:55:09 -04:00