Commit graph

299 commits

Author SHA1 Message Date
Haavard Skinnemoen
caf83ea888 avr32: Use the same entry point for reset and exception handling
Since the reset vector is always aligned to a very large boundary, we
can save a couple of KB worth of alignment padding by placing the
exception vectors at the same address.

Deciding which one it is is easy: If we're handling an exception, the
CPU is in Exception mode. If we're starting up after reset, the CPU is
in Supervisor mode. So this adds a very minimal overhead to the reset
path (only executed once) and the exception handling path (normally
never executed at all.)

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:30 +02:00
Haavard Skinnemoen
44453b25b0 avr32: Clean up the HMATRIX code
Rework the HMATRIX configuration interface so that it becomes easier
to configure the HMATRIX for boards with special needs, and add new
parts.

The HMATRIX header file has been split into a general,
chip-independent part with register definitions, etc. and a
chip-specific part with SFR bitfield definitions and master/slave
identifiers.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
Haavard Skinnemoen
0a2e48792d avr32: Add support for the ATSTK1006 board
This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
board. It's currently in production and will be available soon.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
Haavard Skinnemoen
781eb9a1e4 avr32: Get rid of the .flashprog section
The .flashprog section was only needed back when we were running
directly from flash, and it's even more useless on NGW100 since it
uses the CFI flash driver which never used this workaround in the
first place.

Remove it on STK1000 as well, and get rid of all the associated code and
annotations.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
Jean-Christophe PLAGNIOL-VILLARD
42fd5f87b1 Merging Stelian Pop AT91 patches
Merge branch 'testing-V2'

Conflicts:

	board/atmel/at91cap9adk/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/u-boot.lds
                Delete no more needed ld script

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-24 12:56:53 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Stelian Pop
19883aede2 Support AT91CAP9 revC CPUs
The AT91CAP9 revC CPU has a few differences over the previous,
revB CPU which was distributed in small quantities only (revA was
an internal Atmel product only).

The revC silicon needs a special initialisation sequence to
switch from the internal (imprecise) RC oscillator to the
external 32k clock.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:45:03 +02:00
Stelian Pop
761c70b80c AT91SAM9RLEK: hook up the ATMEL LCD driver
This patch makes the necessary adaptations (PIO configurations and
defines in config header file) to hook up the Atmel LCD driver to the
AT91SAM9RLEK board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:45:02 +02:00
Stelian Pop
56a2479cd7 AT91SAM9263EK: hook up the ATMEL LCD driver
This patch makes the necessary adaptations (PIO configurations and
defines in config header file) to hook up the Atmel LCD driver to the
AT91SAM9263EK board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:45:02 +02:00
Stelian Pop
820f2a9583 AT91SAM9261EK: hook up the ATMEL LCD driver
This patch makes the necessary adaptations (PIO configurations and
defines in config header file) to hook up the Atmel LCD driver to the
AT91SAM9261EK board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:45:02 +02:00
Stelian Pop
c139b17d20 AT91CAP9ADK: hook up the ATMEL LCD driver
This patch makes the necessary adaptations (PIO configurations and
defines in config header file) to hook up the Atmel LCD driver to the
AT91CAP9ADK board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:45:02 +02:00
Stelian Pop
2118ebb44d AT91SAM9RLEK support
This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:35:23 +02:00
Stelian Pop
8e429b3eee AT91SAM9263EK support
This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:34:29 +02:00
Stelian Pop
d99a8ff66d AT91SAM9261EK support
This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:08 +02:00
Stelian Pop
c1212b2f5c AT91SAM9260EK: Handle 8 or 16 bit NAND
The Atmel boards can handle 8 or 16 bit NAND memories. This patch
makes the support configurable in the board config header file
(CFG_NAND_DBW_8 or CFG_NAND_DBW_16).

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:07 +02:00
Stelian Pop
1c90df3e14 AT91CAP9ADK: Handle 8 or 16 bit NAND
The Atmel boards can handle 8 or 16 bit NAND memories. This patch
makes the support configurable in the board config header file
(CFG_NAND_DBW_8 or CFG_NAND_DBW_16).

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:06 +02:00
Stelian Pop
11b162bae0 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
below avoids the duplication of u-boot.lds by putting the file in the
cpu directory instead of the board one.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:06 +02:00
Stelian Pop
d48abea4b8 Add proper copyright notices in Atmel boards Makefiles
The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
copyright notice. This patch adds the missing pieces.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:06 +02:00
Stelian Pop
e817a042ce Add copyright information in Atmel boards partition.c
When Ulf did the dataflash.c cleanup, he didn't add his copyright on
the new created files. This patch fixes the problem.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:06 +02:00
Stelian Pop
4f6c810106 Update origin and copyright information in arch-at91sam9 header files
When doing the AT91CAP9/AT91SAM9 port, a number of header files were
copied from the Linux kernel sources. This patch explicitly specifies
this origin for all the copied headers, and for those missing copyright
information, adds it.

Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
in the latest kernel sources by 'at91sam9_smc.h'.

The copyright information has been confirmed by the AT91 Linux kernel
maintainer, Andrew Victor <avictor.za@gmail.com>.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:30:13 +02:00
Stelian Pop
cce9cfdabc Fix @ -> <at> substitution
When applying the AT91CAP9 patches upstream, something transformed
the '@' character into the ' <at> ' sequence.

The patch below restores the original form in all the places where
it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
were copied from AT91CAP9, and a couple of other files where the
' <at> ' sequence was present).

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-05-10 00:30:22 +02:00
Stelian Pop
9606b3c81b Update origin and copyright information in arch-at91sam9 header files
When doing the AT91CAP9/AT91SAM9 port, a number of header files were
copied from the Linux kernel sources. This patch explicitly specifies
this origin for all the copied headers, and for those missing copyright
information, adds it.

Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
in the latest kernel sources by 'at91sam9_smc.h'.

The copyright information has been confirmed by the AT91 Linux kernel
maintainer, Andrew Victor <avictor.za@gmail.com>.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-05-10 00:28:51 +02:00
Stelian Pop
ceb6b4fbe1 Add copyright information in Atmel boards partition.c
When Ulf did the dataflash.c cleanup, he didn't add his copyright on
the new created files. This patch fixes the problem.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-05-10 00:24:02 +02:00
Stelian Pop
567fb85217 Fix @ -> <at> substitution
When applying the AT91CAP9 patches upstream, something transformed
the '@' character into the ' <at> ' sequence.

The patch below restores the original form in all the places where
it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
were copied from AT91CAP9, and a couple of other files where the
' <at> ' sequence was present).

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-08 23:40:42 +02:00
Ulf Samuelsson
c3a60cb3bd Clean up dataflash partitioning
This patch removes the board dependent parts from
"drivers/mtd/dataflash.c".
Each board relying on this, will have the appropriate
code in a new file, "partition.c" in the board directory.
board Makefiles updated to use the file.

The dataflash partitions are aligned on sector/page boundaries.

The CONFIG_NEW_DF_PARTITION was used to create named partitions
This is now the default operation, and the CONFIG variable is removed.

Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
2008-04-18 00:24:05 -07:00
Jean-Christophe PLAGNIOL-VILLARD
4e03dde84d AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-01 01:46:12 +02:00
Stelian Pop
0176d43e75 Add support for AT91SAM9260EK
Support for booting from internal DataFlash, external DataFlash card
or NAND flash is available.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:46:12 +02:00
Jean-Christophe PLAGNIOL-VILLARD
761712188b AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-01 01:46:01 +02:00
Stelian Pop
983c1db04c Port AT91CAP9 to the new headers
Adapt the existing AT91CAP9 code to the new headers and APIs.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:45:50 +02:00
Jean-Christophe PLAGNIOL-VILLARD
64d792063f at91cap9adk: fix implicit declaration of function 'eth_init'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-17 16:03:20 +01:00
Peter Pearse
faf8f9bc95 Merge branch '080202_at91rm9200dk' of git://linux-arm.org/u-boot-armdev 2008-02-15 13:00:22 +00:00
Peter Pearse
ae92069abe Merge branch '080116_at91cap9' of git://linux-arm.org/u-boot-armdev 2008-02-15 12:59:15 +00:00
Haavard Skinnemoen
6523010702 Move AT91RM9200DK board support under board/atmel
We already have a vendor subdir for Atmel, so we should use it.

Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
2008-02-14 10:07:46 +00:00
Stelian Pop
64e8a06af6 AT91CAP9 support : move board files to Atmel vendor directory.
AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14 09:37:58 +00:00
Haavard Skinnemoen
d38da53794 AVR32: Make SDRAM refresh rate configurable
The existing code assumes the SDRAM row refresh period should always
be 15.6 us. This is not always true, and indeed on the ATNGW100, the
refresh rate should really be 7.81 us.

Add a refresh_period member to struct sdram_info and initialize it
properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
panic() until the refresh_period member is updated properly.

Big thanks to Gerhard Berghofer for pointing out this issue.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-05 12:14:27 +01:00
Haavard Skinnemoen
61151cccb6 ATSTK1000: Fix potential flash programming bug
The (now obsolete) atngw100 flash programming code was having problems
programming the onboard at49bv642 chip. The atstk1000 flash
programming code may have the same bug, so import fix for this problem
from the AVR32 Linux BSP.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-05 12:14:27 +01:00
Haavard Skinnemoen
6b44394442 AVR32: ATNGW100 board support
Add support for the ATNGW100 Network Gateway reference design,
including flash, ethernet and MMC support.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-18 09:53:18 +01:00
Wolfgang Denk
64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
Haavard Skinnemoen
7b624ad254 AVR32: Initialize bi_flash* in board_init_r
The ATSTK1000-specific flash driver intializes bi_flashstart,
bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
driver, don't.

Initialize these in board_init_r instead so that things will still be
set up correctly when we switch to the CFI driver.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-06 20:17:37 +02:00
Jon Loeliger
fcec2eb93e board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:47:45 -05:00
Jon Loeliger
5e378003d5 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:34:58 +02:00
Haavard Skinnemoen
8e6875183c AVR32: Enable MMC support
Set up the portmux for the MMC interface and enable the MMC driver
along with support for DOS partitions, ext2 and FAT filesystems.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
9a24f477a1 AVR32: Enable networking
Implement MACB initialization for AVR32 and ATSTK1000, and turn
everything on, including the MACB driver.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
12f099c081 AVR32: Use initdram() instead of board_init_memories()
Conform to the "standard" interface and use initdram() instead of
board_init_memories() on AVR32. This enables us to get rid of the
sdram_size member of the global_data struct as well.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
1f4f2121c2 AVR32: Relocate u-boot to SDRAM
Relocate the u-boot image into SDRAM like everyone else does. This
means that we can handle much larger .data and .bss than we used to.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
df548d3c3e AVR32: Resource management rewrite
Rewrite the resource management code (i.e. I/O memory, clock gating,
gpio) so it doesn't depend on any global state. This is necessary
because this code is heavily used before relocation to RAM, so we
can't write to any global variables.

As an added bonus, this makes u-boot's memory footprint a bit smaller,
although some functionality has been left out; all clocks are enabled
all the time, and there's no checking for gpio line conflicts.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Wolfgang Denk
d38936cdae Fix "ar" flags in some Makefiles to allow for silent "make -s" 2006-10-27 11:55:21 +02:00
Haavard Skinnemoen
5e3b0bc19f Finish up support for the ATSTK1000/ATSTK1002 boards
Add atstk1002_config target to Makefile and move the AVR32 section
down below Blackfin so that it doesn't end up in the middle of
MIPS.

Drop the autogenerated linker script thing for now. Will have to
revisit how to handle chips with different flash and RAM layout
later.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-25 23:44:48 +02:00
Wolfgang Denk
3a78e3e75b Move atstk1000 files into vendor specific directory.
Patch by Haavard Skinnemoen, 12 Sep 2006
2006-10-24 14:51:36 +02:00