Commit graph

3776 commits

Author SHA1 Message Date
Hans de Goede
fd1bd21bf0 dm: usb: Do not assume that first child is always a hub
On some single port (otg) controllers there is no emulated root hub, so
the first child (if any) may be one of: UCLASS_MASS_STORAGE,
UCLASS_USB_DEV_GENERIC or UCLASS_USB_HUB.

All three of these (and in the future others) are suitable for our
purposes, remove the check for the device being a hub, and add a check to
deal with the fact that there may be no child-dev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:36 -06:00
Hans de Goede
c27b329054 dm: usb: Fix "usb tree" output
last_child was abused by the old usb code to first store 1 if the
usb_device was not the root of the usb tree, and then later on re-used
to store whether or not the usb_device is actually the last child.

The dm-usb code was always setting it to actually reflect the last-child
status which is wrong for the last child leading to output like this:

USB device tree:
  1  Hub (12 Mb/s, 100mA)
  |  ALCOR USB Hub 2.0
  |
  | 2  Mass Storage (12 Mb/s, 100mA)
  |    USB Flash Disk 4C0E960F
  |
  +-3  Human Interface (1.5 Mb/s, 100mA)
       SINO WEALTH USB Composite Device

Instead of this:

USB device tree:
  1  Hub (12 Mb/s, 100mA)
  |  ALCOR USB Hub 2.0
  |
  +-2  Mass Storage (12 Mb/s, 100mA)
  |    USB Flash Disk 4C0E960F
  |
  +-3  Human Interface (1.5 Mb/s, 100mA)
       SINO WEALTH USB Composite Device

This commit fixes this by first checking that the device is not root,
and then setting last_child. This commit also updates the old code to not
abuse the last_child variable to store the root check result.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:35 -06:00
Hans de Goede
8802f56349 usb: Add an usb_device parameter to usb_reset_root_port
Add an usb_device parameter to usb_reset_root_port so that it knows which
root-port it is resetting. This is necessary for proper device-model support
for usb_reset_root_port.

Also remove a duplicate declaration of usb_reset_root_port() from usb.h .

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:35 -06:00
Hans de Goede
682c9f8dfc usb: Pass device instead of portnr to usb_legacy_port_reset
Pass the usb_device instead of the portnr to usb_legacy_port_reset and
rename it to usb_hub_port_reset as there is nothing legacy about it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:35 -06:00
Hans de Goede
9eb72dd1f4 usb: usb_setup_device: Drop unneeded portnr function argument
Drop the unneeded portnr function argument, the portnr is part of the
usb_device struct which is passed via the dev argument.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:35 -06:00
Hans de Goede
6bfe80e754 usb: Drop device-model specific copy of usb_legacy_port_reset
The device-model usb_legacy_port_reset function calls the device-model
usb_port_reset function which is a 1 on 1 copy of the non dm
usb_legacy_port_reset and this is the only use of usb_port_reset in all
of u-boot.

Drop both, and alway use the usb_legacy_port_reset() version in
common/usb.c .

Also while at it make it static as it is only used in common/usb.c .

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:34 -06:00
Simon Glass
aea3d40d05 spl: Add a debug string before the jump to U-Boot
As a debug option, add positive confirmation that SPL has completed
execution. This can help with diagnosing the location of unexpected hangs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:29 -06:00
Simon Glass
070d00b8dc dm: spl: Allow device tree/driver model in board_init_f()
Add an spl_init() function that does basic init such that board_init_f() can
use simple malloc(), device tree and driver model. Each one is set up only
if enabled for SPL.

Note: We really should refactor SPL such that there is a single
board_init_f() and rename the existing weak board_init_f() functions
provided by boards, calling them from the single board_init_f().

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:28 -06:00
Simon Glass
dc3dedfeb1 dm: mmc: Allow driver model to be used for MMC in SPL
Enable MMC using driver model in SPL for consistency with U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:25 -06:00
Simon Glass
fdfa39d3f2 spl: Add debugging info for spl_mmc boot
Add a few messages to indicate progress and failure.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:24 -06:00
Simon Glass
da229e4e57 sandbox: Drop special-case sandbox console code
At present printf() skips output if it can see there is no console. This
is really just an optimisation, and is not necessary. Also it is currently
incorrect in some cases. Rather than update the logic, just remove it so
that we don't need to keep it in sync.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:22 -06:00
Simon Glass
d6ea5307da dm: Allow debug UART to support an early console
When there is no console ready, allow the debug UART to be used for output.
This makes debugging of early code considerably easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:22 -06:00
Simon Glass
5b9d44df23 mkimage: Display a better list of available image types
Offer to display the available image types in help. Also, rather than
hacking the genimg_get_type_id() function to display a list of types,
do this in the tool. Also, sort the list.

The list of image types is quite long, and hard to discover. Print it out
when we show help information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:20 -06:00
Tom Rini
b217c89e85 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2015-07-20 17:12:52 -04:00
Prabhakar Kushwaha
9527931507 board/ls2085rdb: Export functions for standalone AQ FW load apps
Export functions required by Aquntia PHY firmware load application.
functions are memset, strcpy, mdelay, mdio_get_current_dev,
phy_find_by_mask, mdio_phydev_for_ethname and miiphy_set_current_dev

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:37 -07:00
Sudeep Holla
8a133bb5ba cmd_fdt: save fdtaddr in hex format
Commit 90fbee3e40 ("cmd_fdt: Actually fix fdt command in sandbox")
changed the format(from hex address to unsigned long) in which "fdtaddr"
is saved . However do_fdt continues reads the "fdtaddr" assuming it to
be in hex format. This may lead to fdt being either loaded or attempted
to load at erroneous address generating fault if the address is out of
memory.

This patch changes back the format to hex while saving the "fdtaddr"
as it was done before.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Hua Yanghao <huayanghao@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-20 07:21:47 -06:00
Andre Przywara
5c1cf89f8c fdt: prevent clearing memory node if there are no banks
Avoid clearing the reg property in the memory DT node if no memory
banks have been specified for a board (CONFIG_NR_DRAM_BANKS == 0).
This allows boards to let U-Boot skip the DT memory tinkering in case
other firmware has already setup the node properly before.
This should be safe as all callers of fdt_fixup_memory_banks that use
a computed <banks> value put at least 1 in there.
Add some documentation comments to the header file.

Signed-off-by: Andre Przywara <osp@andrep.de>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-20 07:21:47 -06:00
Bin Meng
ffe387988d cmd: date: Change to use CONFIG_DM_RTC instead of CONFIG_DM_I2C
Currently CONFIG_DM_I2C is used in cmd_date.c for driver model,
but it should be actually CONFIG_DM_RTC.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:16 -06:00
Bin Meng
166c3984e6 dm: cpu: Fix undefined ENOSYS build error
Include <errno.h> otherwise ENOSYS is undefined.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Simon Glass
a7d0711a24 spi: sf: Print the error code on failure
Rather than just 'ERROR', display the error code, which may be useful, at
least with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-07-14 18:03:15 -06:00
Bin Meng
aefaff8ed8 x86: fsp: Move FspInitEntry call to board_init_f()
The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far.
It worked pretty well but looks not that good. Apart from doing too
much work than just enabling CAR, it cannot read the configuration
data from device tree at that time. Now we want to move it a little
bit later as part of init_sequence_f[] being called by board_init_f().
This way it looks and works better in the U-Boot initialization path.

Due to FSP's design, after calling FspInitEntry it will not return to
its caller, instead it jumps to a continuation function which is given
by bootloader with a new stack in system memory. The original stack in
the CAR is gone, but its content is perserved by FSP and described by
a bootloader temporary memory HOB. Technically we can recover anything
we had before in the previous stack, but that is way too complicated.
To make life much easier, in the FSP continuation routine we just
simply call fsp_init_done() and jump back to car_init_ret() to redo
the whole board_init_f() initialization, but this time with a non-zero
HOB list pointer saved in U-Boot's global data so that we can bypass
the FspInitEntry for the second time.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Tested-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Andre Przywara
c7d0fd797e scsi: fix compiler warning with DEBUG and 48bit LBAs
Commit 2b42c9317d ("ahci: support LBA48 data reads for 2+TB drives")
introduced conditional code which triggers a warning when compiled
with DEBUG enabled:

In file included from common/cmd_scsi.c:12:0:
common/cmd_scsi.c: In function 'scsi_read':
include/common.h:109:4: warning: 'smallblks' may be used uninitialized in this function [-Wmaybe-uninitialized]
...

Since this is for debug only, take the easy way and initialize the
variable explicitly on declaration to avoid the warning.
(Fix a nearby whitespace error on the way.)

Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Andre Przywara <osp@andrep.de>
2015-07-11 08:01:54 -04:00
Jagan Teki
f39eb75b22 common: Add CMD_SF Kconfig entry
Added Kconfig entry for CMD_SF.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:15:04 +05:30
Heiko Schocher
8ee81b7f9b mtd, spi: Check if flash pointer is used
If flash pointer is used free it, before probing a new
flash and storing it in flash.

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-06-30 00:40:11 +05:30
Heiko Schocher
2ec1a4059c spi, sf: Use offset and size in sf cmd from mtdpartition
With this patch, it is possible to get the offset and size information
from the mtdpartiton setting in "mtdparts", similiar to the
"nand" commandos.

=> sf
sf - SPI flash sub-system

Usage:
sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
                                  and chip select
sf read addr offset|partition len       - read `len' bytes starting at
                                          `offset' to memory at `addr'
sf write addr offset|partition len      - write `len' bytes from memory
                                          at `addr' to flash at `offset'
sf erase offset|partition [+]len        - erase `len' bytes from `offset'
                                          `+len' round up `len' to block size
sf update addr offset|partition len     - erase and write `len' bytes from memory
                                          at `addr' to flash at `offset'
=>
for example "env" is defined in mtdparts:

=> sf read 13000000 env
device 0 offset 0xd0000, size 0x10000
SF: 65536 bytes @ 0xd0000 Read: OK

zynq-uboot> mtdparts add nor0 0x10000@0x0 env
zynq-uboot> sf erase env 0x10000
SF: 65536 bytes @ 0x0 Erased: OK

zynq-uboot> sf write 0x100 env
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Written: OK

zynq-uboot> sf read 0x40000 env
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Read: OK

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-06-30 00:40:11 +05:30
Heiko Schocher
09c3280754 mtd, nand: Move common functions from cmd_nand.c to common place
Move common functions from cmd_nand.c (for calculating offset
and size from cmdline paramter) to common place, so they could
used from other commands which use mtd partitions.

For onenand the arg_off_size() is left in common/cmd_onenand.c.
It should use now the common arg_off() function, but as I could
not test onenand I let it there ...

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-06-30 00:40:11 +05:30
Daniel Schwierzeck
9fe6d8716e mtd, spi: Add MTD layer driver
Add MTD layer driver for spi, original patch from:
http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced

Changes from Heiko Schocher against this patch:
- Remove compile error if not defining CONFIG_SPI_FLASH_MTD:

  LD      drivers/mtd/spi/built-in.o
drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister':
/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister':
/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1
make: *** [drivers/mtd/spi] Fehler 2

- Add a README entry.
- Add correct writebufsize, to fit with Linux v3.14
  MTD, UBI/UBIFS sync.

Note (From Jagan): For testing raw mtd parition erase/read/write operations
using cmd_sf, sf_mtd should be required to register the spi flash device to
MTD layer but the sf_mtd_info ops were not required until and unless if we
use any flash filesystem layer say for example UBI. Due to this the foot-print
got increased ~290bytes in non-UBI case here that should be acceptible.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-06-30 00:40:11 +05:30
Joe Hershberger
ef0f2f5752 Move defaults from config_cmd_default.h to Kconfig
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:18:34 -04:00
Joe Hershberger
6aab5ae921 common: Add the CMD_ENV_EXISTS config to Kconfig
This command needs to exist in the Kconfig so that it can be moved from
the config_cmd_default.h.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-25 17:04:51 -04:00
Joe Hershberger
f38bec9f15 common: Fix comment for saveenv in Kconfig
The help for this was simply copied from another command.

Update it to reflect the command.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-25 17:04:47 -04:00
Tom Rini
325849ff3d Merge git://git.denx.de/u-boot-usb 2015-06-19 16:46:51 -04:00
Paul Kocialkowski
8607c4f127 common: cmd_part: start and size sub-commands introduction
This introduces the part start and part size sub-commands. The purpose of these
is to store the start block and size of a partition in a variable, given the
device and partition number.

This allows reading raw data that fits a single partition more easily.
For instance, this could be used to figure out the start block and size of a
kernel partition when a partition table is present, given the partition number.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Stephen Warren <swarren@nvidia.com>
[trini: Change "%lx" to LBAF]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-19 16:46:47 -04:00
Paul Kocialkowski
a78f78ebeb common: cmd_part: Proper alignment
This fixes a misaligned declaration.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-06-19 16:46:47 -04:00
Hans de Goede
de451493f1 usb: kbd: Disable idle input reports when we do not need them
When we're polling and thus handling key-repeat in software, make sure
to disable idle reports, some keyboards may have these enabled by default
messing up our software keyrepeat.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-06-19 14:33:29 +02:00
Paul Kocialkowski
3ae8f4c8ae spl: spl_mmc: MMC boot mode provisions checks
This allows using only one of either raw or fs mode for SPL mmc boot, without
the need to have provisions for the other. In particular, a device may have
U-Boot installed on a file system on the mmc, without ever needing to read
U-Boot from raw memory. Thus, there is no reason to provide a sector or
partition for raw mode. This allows this behaviour and still provides a robust
fallback mechanism in case provisions for both modes are defined.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-06-18 16:11:42 -04:00
Paul Kocialkowski
1ec264695f spl: spl_mmc: Minor cosmetics
This switches some printf calls to puts and avoids a test repetition.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-06-18 16:11:42 -04:00
Mark Langsdorf
2b42c9317d ahci: support LBA48 data reads for 2+TB drives
Enable full 48-bit LBA48 data reads by passing the upper word of the
LBA block pointer in bytes 9 and 10 of the FIS.

This allows uboot to load data from any arbitrary sector on a drive
with 2 or more TB of available data connected to an AHCI controller.

Signed-off-by: Mark Langsdorf <mark.langsdorf@gmail.com>
Signed-off-by: Andre Przywara <osp@andrep.de>
[trini: Make use of CONFIG_SYS_64BIT_LBA in a few places to drop
 warnings on platforms that don't enable that feature ]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-12 16:52:32 -04:00
Mark Langsdorf
35df893199 cmd_scsi: use lbaint_t for LBA values instead of u32
Signed-off-by: Mark Langsdorf <mark.langsdorf@gmail.com>
Signed-off-by: Andre Przywara <osp@andrep.de>
2015-06-12 13:02:07 -04:00
Tom Rini
b9130d88fa Merge git://git.denx.de/u-boot-dm 2015-06-11 21:18:52 -04:00
Hannes Schmelzer
7bb7d672aa common/cmd_bdinfo: show gd->board_type
sometimes it is usefull to know if board-detection has
written the correct value into gd->board_type.

For this we add some output to the bdinfo command.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-06-11 08:29:14 -04:00
Simon Glass
b6bfb6ff9a Add a simple version of memalign()
This is used when the full malloc() is not available.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10 19:26:55 -06:00
Simon Glass
8d379f179a lcd: Support colour lookup table on 16bpp display in BMP images
For 16-bit-per-pixel displays it is useful to support 8 bit-per-pixel
images to reduce image size. Add support for this when drawing BMP images.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10 19:26:55 -06:00
Simon Glass
1c3dbe56f7 Remove typedefs from bmp_layout.h
We try to avoid typedefs and these ones are easy enough to remove. Before
changing this header in the next patch, remove the typedefs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-10 19:26:54 -06:00
Stefan Roese
8f0b1e24e2 autoboot.c: Add feature to stop autobooting via SHA256 encrypted password
This patch adds the feature to only stop the autobooting, and therefor
boot into the U-Boot prompt, when the input string / password matches
a values that is encypted via a SHA256 hash and saved in the environment.

This feature is enabled by defined these config options:
     CONFIG_AUTOBOOT_KEYED
     CONFIG_AUTOBOOT_STOP_STR_SHA256

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-06-08 17:32:40 -04:00
Stefan Roese
d126e01649 autoboot.c: Move config options to Kconfig
This patch moves the following config options to Kconfig:

CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_PROMPT
CONFIG_AUTOBOOT_DELAY_STR
CONFIG_AUTOBOOT_STOP_STR
AUTOBOOT_KEYED_CTRLC

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Drop ip04 and pm9263 configs/ additions, those boards previously
 set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
 all boards that did change. Make digsy_mtc_* string include seconds to
 match others and not warn. ]
Signed-off-by: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-08 17:32:16 -04:00
Stefan Roese
2d908fa084 autoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG_AUTOBOOT_DELAY_STR2
These defines for a 2nd autoboot stop and delay string are nearly unused. Only
sc3 defines CONFIG_AUTOBOOT_DELAY_STR2. And a patch to remove this most likely
unmaintained board is also posted to the list.

By removing these defines the code will become cleaner and moving the remaining
compile options to Kconfig will get easier.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2015-06-08 10:45:11 -04:00
Hans de Goede
5bcec545a6 image-fit: Fix compiler warning in fit_conf_print()
This fixes the following compiler warning:

In file included from tools/common/image-fit.c:1:0:
./tools/../common/image-fit.c: In function ‘fit_conf_print’:
./tools/../common/image-fit.c:1470:27: warning: logical not is only applied
 to the left hand side of comparison [-Wlogical-not-parentheses]
    (const char **)&uname) > 0;

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-06-06 09:30:20 -04:00
Tom Rini
f1737152c0 Merge git://git.denx.de/u-boot-fdt 2015-06-05 12:14:01 -04:00
Paul Kocialkowski
10be5b5d3a fdt: Pass the device serial number through devicetree
Before device-tree, the device serial number used to be passed to the kernel
using ATAGs (on ARM). This is now deprecated and all the handover to the kernel
should now be done using device-tree. Thus, this passes the serial-number
property to the kernel using the serial-number property of the root node, as
expected by the kernel.

The serial number is a string that somewhat represents the device's serial
number. It might come from some form of storage (e.g. an eeprom) and be
programmed at factory-time by the manufacturer or come from identification
bits available in e.g. the SoC.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Simon Glass <sgj@chromium.org>
2015-06-05 08:32:07 -06:00
Bin Meng
77c2b210c7 cmd_ide: Eliminate build warnings in atapi_inquiry()
Eliminate the following build warning in atapi_inquiry():
  "warning: assignment from incompatible pointer type [enabled by default]"

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Tom Rini
563e53efaa Merge branch 'master' of git://git.denx.de/u-boot-net
Fixup include/configs/unipher.h to not set CONFIG_LIB_RAND

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-02 08:53:41 -04:00
Joe Hershberger
6eed3786c6 net: Move the CMD_NET config to defconfigs
This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-01 09:40:15 -05:00
Joe Hershberger
7453cb595c Move setexpr to Kconfig
Another shell scripting command that has not been moved.

Moved using tools/moveconfig.py using these settings:

CMD_SETEXPR bool n y

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-01 09:39:29 -05:00
Hans de Goede
8454c84af5 usb: kbd: Fix key repeat not always working
The usb-kbd key repeat code assumes that reports get repeated every 40 ms,
this is never true when using CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP, and
does not always works for CONFIG_SYS_USB_EVENT_POLL and
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE since not all usb keyboards honor
the usb_set_idle() command.

For CONFIG_SYS_USB_EVENT_POLL we must use usb_set_idle() since we do a
blocking wait for the hid report, so if we do not tell the keyboard to send
a hid report every 40ms even if nothing changes then we will block u-boot
for 1s (the default u-boot usb interrupt packet timeout). Note that in this
case on keyboards which do not support usb_set_idle() we loose and we actually
get 1s latencies on other u-boot activities.

For the other poll-methods this commit stops using usb_set_idle() and instead
repeats the last received hid-report every 40 ms as long as no new hid-report
is received. This fixes key-repeat not working at all with
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP and fixes it not working with
keyboards which do not implement usb_set_idle() when using
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29 12:41:05 +02:00
Hans de Goede
126ca94274 usb: Remove unused variable in usb_setup_descriptor()
The compiler did not catch this as it was marked __maybe_unused.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29 12:41:04 +02:00
Matt Porter
c777efe3a1 image: fix build when CONFIG_NR_DRAM_BANKS is disabled on ARM
common/image.c currently implicitly depends on CONFIG_NR_DRAM_BANKS
when CONFIG_ARM is enabled. Make this requirement explicit.

Signed-off-by: Matt Porter <mporter@konsulko.com>
2015-05-28 08:18:23 -04:00
Andrew Bradford
ea11b401b5 meminfo cmd: Enable printing >=4GiB SDRAM sizes
gd->ram_size is stored as phys_size_t type which can be bigger than an
unsigned long on some architectures.  When using unsigned long type,
SDRAM of 4GiB or larger will not print the correct size, but using
phys_size_t will.

Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
2015-05-28 08:18:21 -04:00
Paul Kocialkowski
3bc37b6d65 spl: spl_mmc: Error and count distinction
This introduces a distinction between return codes that are read bytes counts
and errors. Read bytes counts are erroneous when null (no data was read) while
errors are erroneous when non-null.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Tim Harvey <tharvey@gateworks.com>
2015-05-28 08:18:21 -04:00
Karl Apsite
d52e8575d9 Combine bootm_find_<thing> functions together
bootm_find_ramdisk_fdt() renamed to bootm_find_images() for readability.

The function bootm_find_ramdisk_fdt() appears to be a simple wrapper for
bootm_find_ramdisk(), bootm_find_fdt(), and now bootm_find_loadables().
I didn't see any other callers entering a bootm_find<thing>, so removing
the wrapper, and condensing these together hopefully makes the code a
little simpler.

Signed-off-by: Karl Apsite <Karl.Apsite@dornerworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-28 08:18:21 -04:00
Karl Apsite
84a07dbfd8 add boot_get_loadables() to load listed images
Added a trimmed down instance of boot_get_<thing>() to satisfy the
minimum requierments of the added feature.  The function follows the
normal patterns set by other boot_get<thing>'s, which should make it a
bit easier to combine them all together into one boot_get_image()
function in a later refactor.

Documentation for the new function can be found in source:
  include/image.h

Signed-off-by: Karl Apsite <Karl.Apsite@dornerworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-28 08:18:20 -04:00
Karl Apsite
ecf8cd6535 mkimage will now report information about loadable
Added FIT_LOADABLE_PROP, so the user can identify an optional entry
named "loadables" in their .its configuration. "loadables" is a comma
separated list in the .its

Documentation can be found in doc/uImage.FIT/source_file_format.txt and
                              doc/uImage.Fit/multi-with-loadables.its

Signed-off-by: Karl Apsite <Karl.Apsite@dornerworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-28 08:18:20 -04:00
Tim Harvey
c75648d75e env_mmc: add error message to pass to set_default_env
Add an error message that gets passed to set_default_env() like
env_nand implements. This message is displayed to the user as the
reason for falling back to the default environment.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-27 13:35:54 -04:00
Tuomas Tynkkynen
9b081d8893 menu: Return an error code if Ctrl-C is pressed
Previously, if the menu activated by the 'sysboot' command gets
interrupted by a Ctrl-C, the behaviour is as if the menu timeout was
reached - i.e. boot the default menu entry. This patch fixes that
so a Ctrl-C now terminates the command as the user would expect.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-27 13:35:54 -04:00
Tuomas Tynkkynen
0ece6b50f1 pxe: Fix crash if 'sysboot' is run without args
Previously, a NULL pointer dereference would occur if the 'sysboot'
command is executed without any arguments.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-27 13:35:48 -04:00
Tom Rini
9bea236b34 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-05-26 10:38:01 -04:00
Tim Harvey
9d3b565441 spl: spl_mmc: fix mmc Falcon mode regression
91199f4a5a broke mmc based Falcon mode.

The block_read function returns the number of blocks read thus the error
check needs to look for a return of 0 blocks read.

Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Paul Kocialkowski <contact@paulk.fr>
2015-05-26 14:26:27 +02:00
Joe Hershberger
94b467b14e env: Distinguish finer between source of env change
We already could tell the difference in the callback between an import
and "other" which we called interactive. Now add further distinction
between interactive (i.e. running env set / env edit / env ask / etc.
from the U-Boot command line) and programmatic (i.e. when u-boot source
calls any variant of setenv() ).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:19 -04:00
Joe Hershberger
bdf1fe4e68 env: Add regex support to env_attrs
Allow the features that use env_attrs to specify regexs for the name

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:19 -04:00
Joe Hershberger
cca98fd6aa env: Allow env_attr_walk to pass a priv * to callback
In some cases it can be helpful to have context in the callback about
the calling situation. This is needed for following patches.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:19 -04:00
Joe Hershberger
032ea185d6 env: Simplify the reverse_strstr() interface
The logic to find the whole matching name was split needlessly between
the reverse_strstr function and its caller. Fully contain it to make the
interface for calling it more consistent.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:13:19 -04:00
Joe Hershberger
7a0ad2cce3 env: Fix return values in env_attr_lookup()
This function returned numbers for error codes. Change them to error
codes.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:19 -04:00
Hans de Goede
a8552c7c9b console: Fix pre-console flushing via cfb_console being very slow
On my A10 OlinuxIno Lime I noticed a huge (5+ seconds) delay coming from
console_init_r. This turns out to be caused by the preconsole buffer flushing
to the cfb_console. The Lime only has a 16 bit memory bus and that is already
heavy used to scan out the 1920x1080 framebuffer.

The problem is that print_pre_console_buffer() was printing the buffer once
character at a time and the cfb_console code then ends up doing a cache-flush
for touched display lines for each character.

This commit fixes this by first building a 0 terminated buffer and then
printing it in one puts() call, avoiding unnecessary cache flushes.

This changes the time for the flush from 5+ seconds to not noticable.

The downside of this approach is that the pre-console buffer needs to fit
on the stack, this is not that much to ask since we are talking about plain
text here. This commit also adjusts the sunxi CONFIG_PRE_CON_BUF_SZ to
actually fit on the stack. Sunxi currently is the only user of the pre-console
code so no other boards need to be adjusted.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-05-19 18:37:30 +02:00
Tim Harvey
9e20560221 env_nand: use nand_spl_load_image for readenv if SPL
The readenv() implementation of env_nand uses the mtd layer which is
unnecessary overhead in SPL when we already have a nand_spl_load_image()
function that doesn't need it. Using this instead eliminates the need
to provide a mtd_read for SPL env as well as reduces code (4KB savings in IMX6
SPL).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Scott Wood <scottwood@freescale.com>
2015-05-19 15:00:56 +02:00
Przemyslaw Marczak
e09b2a02d3 common: cmd regulator: command cleanup
This commit cleanups the regulator command.
The first change, is adjusting "regulator dev" command to use
"regulator-name" constraint, for setting the operating device.
Thanks to this, the regulator_get() function is removed.

This also updates do_list() function, with loop over uclass_find_*
function calls, to prevent probe of all listed regulators.

This also cleanups the printing in command.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Przemyslaw Marczak
493cdec7ac common: cmd pmic: command cleanup
This commit cleanups the use of function: failed().
The new function name is: failure(), and it is used
for print errno and the errno-related message only.

The second change is choosing PMIC device by it's name,
instead of seq number. Thanks to this change, for set
the current device, call of pmic_get() is enough.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Przemyslaw Marczak
6262b72b8b dm: regulator: add regulator command
This command is based on driver model regulator's API.
The user interface provides:
- list UCLASS regulator devices
- show or [set] operating regulator device
- print constraints info
- print operating status
- print/[set] voltage value [uV] (force)
- print/[set] current value [uA]
- print/[set] operating mode id
- enable the regulator output
- disable the regulator output

The 'force' option can be used for setting the value which exceeds
the constraints min/max limits.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:37 -06:00
Przemyslaw Marczak
d89fdcf9cf dm: pmic: add pmic command
This is new command for the PMIC devices based on driver model PMIC API.
Command features are unchanged:
- list UCLASS pmic devices
- show or [set] operating pmic device (NEW)
- dump registers
- read byte of register at address
- write byte to register at address

The only one change for this command is 'dev' subcommand.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:37 -06:00
Simon Glass
59aa9df383 dm: i2c: Implement 'i2c bus' command for driver model
This command was missed in the conversion. Add it back for driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Heiko Schocher <hs@denx.de>
2015-05-14 18:49:33 -06:00
Vincent Palatin
08f3bb0bcd usb: add device connection/disconnection detection
Provide a function to detect USB device insertion/removal in order to
avoid having to do USB enumeration in a tight loop when trying to detect
peripheral hotplugging.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>

Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:33 -06:00
Hans de Goede
45b9ea1da2 usb: Stop reset procedure when a dev is handed over to a companion hcd
Short circuit the retry loop in legacy_hub_port_reset() by returning an
error from usb_control_msg() when a device was handed over to a companion
by the ehci code. This avoids trying to reset low / fullspeed devices 5
times needlessly. Also do not print an error when a device has been handed
over.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:31 -06:00
Hans de Goede
ad84a42fc5 usb: legacy_hub_port_reset() check and propagate usb_set_port_feature() errors
Actually check for usb_set_port_feature() errors and propagate these if they
happen.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:30 -06:00
Hans de Goede
651d95c8eb usb: usb_control_msg() propagate controller error code
Propagate the error returned by submit_control_msg() rather then always
returning -EIO when the hcd code indicates an error.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:30 -06:00
Joe Hershberger
2068cea173 Use map_sysmem when accessing memory in setexpr
The setexpr command used to segfault when accessing memory in sandbox.
The pointer accesses should be mapped.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-14 07:03:15 -04:00
Tom Rini
9597494ebf Merge branch 'master' of git://git.denx.de/u-boot-tegra 2015-05-14 07:01:11 -04:00
Simon Glass
ce49e79450 spl: Correct address in spl_relocate_stack_gd()
During the Kconfig conversion one of the changes was missed.
CONFIG_SPL_STACK_R should be CONFIG_SPL_STACK_R_ADDR since we want the
address.

Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-14 06:57:23 -04:00
Simon Glass
00cf1167bb edid: Add a function to read detailed monitor timings
For digital displays (such as EDP LCDs) we would like to read the EDID
information and use that to set display timings. Provide a function to do
this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:10 -07:00
Stefan Roese
27e7215645 ppc4xx: Remove sc3 board
As this board seems to be unmaintained for quite some time, and its
not moved to the generic board ingrastructure, lets remove it.

This will also enable us to remove the CONFIG_AUTOBOOT_DELAY_STR2
and CONFIG_AUTOBOOT_STOP_STR2 macros, as this sc3 board is the
only one using one of this macros. A removal patch will follow
soon.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Juergen Beisert <jbeisert@eurodsn.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-05-10 09:59:38 -04:00
Joe Hershberger
a69bdba9c6 Fix broken verify functionality in crc32 command
Introduced in change d20a40de9d
"Roll crc32 into hash infrastructure"

The crc32 command with no -v expects an optional 3rd argument to be an
address to store the result in. With the -v switch, the last argument
is a crc, not an address. In the case where -v is set, we should set the
HASH_FLAG_ENV flag since that will first look for the value to be a
digest value, which matches the expected API for the crc32 command.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-10 09:59:37 -04:00
Joe Hershberger
849337bb22 Fix inconsistency of VERIFY defines in cmd_mem
Introduced in change d20a40de9d
"Roll crc32 into hash infrastructure"

Use a consistent define to enable the verify feature in crc32 command.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-10 09:59:37 -04:00
maxin.john@enea.com
8ca584ecfb cmd_part: fix usage text
Fix the usage info from:
part part uuid <interface> <dev>:<part>
to
part uuid <interface> <dev>:<part>

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Reviewed-By: Sjoerd Simons <sjoerd.simons@collabora.co.uk
2015-05-10 07:29:38 -04:00
Paul Kocialkowski
ecb301394b spl: spl_mmc: Partition raw boot mode for eMMC
This adds support for providing a partition number instead of a sector for eMMC.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-05-10 07:29:37 -04:00
Paul Kocialkowski
91199f4a5a spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics
This refactors spl_mmc_load_image to use a switch/case structure and easier
to understand spl_start_uboot checks. This also introduces some more automatic
fallback on the next mmc boot mode as long as it keeps failing.

Lines that go beyond 80 chars are also reduced by reducing the number of tabs.
Debug and error strings are refctored to match a common style.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
[trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be
 __maybe_unused]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-05-10 07:27:19 -04:00
Maxime Ripard
87f02d5aee image: android: handle default kernel address
The two tools that create android boot images, mkbootimg and the fastboot
client, set the kernel address by default to 0x10008000.

U-boot always honors this field, and will try to relocate the kernel to
whatever value is set in the header, which won't be mapped to the actual RAM on
most platforms, resulting in the kernel obviously not booting.

All the targets in U-Boot right now will download the android boot image to
CONFIG_SYS_LOAD_ADDR, which means that it will already have been downloaded to
some location that is suitable for execution.

In order to have the kernel booting even with the default boot image kernel
address, if that address is used, just execute the kernel where it is.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-08 17:24:17 -04:00
Hans de Goede
2b338ef411 usb: Fix maxpacketsize for first descriptor read for low-speed usb devs
This fixes descriptor reading of lowspeed devices through ohci not working.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 08:46:56 -06:00
Simon Glass
f9951eadb6 dm: rtc: Convert 'date' command to support driver model
Adjust this command so that it supports using driver model for I2C, i.e.
CONFIG_DM_I2C. This will permit it to be used in sandbox also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:40 -06:00
Simon Glass
9f9276c34c dm: rtc: Rename to_tm() to rtc_to_tm() and add error code
Rename this function so that it is clear that it is provided by the RTC.
Also return an error when it cannot function as expected. This is unlikely
to occur since it works for dates since 1752 and many RTCs do not support
such old dates. Still it is better to be accurate.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-05-05 20:58:20 -06:00
Simon Glass
199e87c340 dm: rtc: Rename gregorian day function
Change this function name to something more descriptive. Also return a
failure code if it cannot calculate a correct value.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-05-05 20:58:20 -06:00
Simon Glass
c3ec646dde fdt: Correct warning in fdt_setup_simplefb_node()
Adjust the printf() string to avoid a warning on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:19 -06:00
Simon Glass
bcb0c61e1a x86: Allow CPUs to be set up after relocation
This permits init of additional CPU cores after relocation and when driver
model is ready.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-30 16:13:48 -06:00
Simon Glass
8e2fac051a Add a 'cpu' command to print CPU information
Add a simple command which provides access to a list of available CPUs along
with descriptions and basic information.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-29 21:02:33 -06:00
Simon Glass
4c509343ab Fix comment nits in board_f.c
Try to make it a little clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-29 21:02:32 -06:00
Tom Rini
e536ab8849 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
Tom Rini
cc555bd4f4 Merge branch 'master' of git://git.denx.de/u-boot-spi 2015-04-28 07:28:43 -04:00
Tom Rini
3f6dcdb9cd Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2015-04-24 13:43:24 -04:00
Scott Wood
b2d5ac5985 armv8/ls2085aqds: NAND boot support
This adds NAND boot support for LS2085AQDS, using SPL framework.
Details of forming NAND image can be found in README.

Signed-off-by: Scott Wood <scottwood@freescale.com>
[York Sun: Remove +S from defconfig after commit 252ed872]
Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 16:46:50 -07:00
Tom Rini
5f757cdcc6 Merge branch 'master' of git://git.denx.de/u-boot-dm 2015-04-23 14:56:10 -04:00
Heiko Schocher
5db73feb1d cmd, nand: add more info to "nand info"
add subpagesize, nand options and bbt options to the
"nand info" output.

=> nand info

Device 0: nand0, sector size 256 KiB
  Page size       4096 b
  OOB size         256 b
  Erase size    262144 b
  subpagesize     4096 b
  options     0x     200
  bbt options 0x    8000

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-04-23 14:56:08 -04:00
Marek Vasut
1a1fa24066 rtc: Set valid date after reset
Some RTC chips tend to set garbage date after reset.
This patch sets the date to 2000-01-01 00:00 immediatelly
after the RTC chip reset is issued using the "date reset"
command.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
2015-04-23 14:56:08 -04:00
York Sun
12eaf31c07 armv8/fsl-lsch3: Update early MMU table
During booting, IFC is mapped to low region. After booting up, IFC is
remapped to high region for larger space. The environmental variables are
also stored at high region. In order to read the variables during booting,
a virtual mapping is required.

Cache was enabled for entire IFC space before. Actually the first two
entries are big enough (4MB) to cover the boot code and environmental
variables. Remove extra entries. Move OCRAM entry out of ifdef.

Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 08:55:56 -07:00
Scott Wood
581508bdfb cmd_mem: Store last address/size/etc as ulong
Otherwise the high 32 bits get truncated on 64-bit U-boot.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-04-23 08:55:54 -07:00
Simon Glass
f3d46bd658 dm: Init device tree as well as driver model in SPL
If enabled, make sure that the device tree is available in SPL before
setting up driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 09:05:55 -06:00
Simon Glass
293f16b1e7 Correct malloc_limit value for pre-relocation malloc()
The limit is measured from the start of the malloc() area and is not an
absolute address. Correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 09:05:53 -06:00
Simon Glass
fb5cf7f16b Move initf_malloc() to a common place
To allow this function to be used from SPL, move it to the malloc()
code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 09:05:53 -06:00
Simon Glass
0879361fd3 fdt: Rename setup_fdt() and make it prepare also
There is little reason to split these two functions. Bring them together
which simplifies the init sequence.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 09:05:53 -06:00
Simon Glass
b45122fdf5 fdt: sandbox: Move setup code from board_f to fdtdec
We want to be able to set up the device tree in SPL, so move this code
to a common place.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 09:05:53 -06:00
Stefan Roese
a8eeaf2f7a cmd_led: Extend led command to support blinking and more leds
This patch extends the U-Boot "led" command to support automatic blinking
by setting a blink frequency in milliseconds. Additionally the number of
supported LEDs is increased to 6 (0...5).

This will be used by the PCA9551 LED driver.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-23 09:43:08 -04:00
tang yuantian
1a1cf6ee47 cmd_scsi: Enable SoC AHCI device on platforms with PCI
Current driver assumes the AHCI is connected to PCI, this is not
true on some SoCs, e.g. LS1021A, which has PCI but the AHCI is
in SoC. This patch will enable embedded AHCI devices on platforms
with PCI.
PCI AHCI devices still can be used by commenting CONFIG_SCSI_AHCI_PLAT
option in head file.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-22 12:14:56 -04:00
Eric Nelson
5d27223ea5 unzip: add gzwrite command to write compressed image to block device
Add gzwrite command to write gzip-compressed images to block devices.

Input must be gzip-compressed according to RFC1952, since the crc
and file size in the trailer will be confirmed during operation.
The decompressed file size must be specified on the command line
for images with decompressed sizes >= 4GiB because the trailer
only contains the low 32 bits of the original file size.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2015-04-22 12:14:55 -04:00
Tim Harvey
08daa258e6 fdt: add new fdt_fixup_display function to configure display
Add 'fdt_fixup_display' function to fixup device-tree native-mode property
of display-timings node to select timings for a specific display.
This is useful if a device-tree has configurations for multiple
display timings for undetectable displays.

see kernel Documentation/devicetree/bindings/video/display-timing.txt

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 14:39:06 +02:00
Stefan Roese
ed62756dcf cmd_sf: Fix problem with "sf update" and unaligned length
On SoCFPGA, using "sf update" with an non-4byte aligned length leads
to a hangup (and reboot via watchdog). This is because of the unaligned
access in the cadence QSPI driver which is hard to prevent since the
data is written into a 4-byte wide FIFO. This patch fixes this problem
by changing the behavior of the last sector write (not sector aligned).

The new code is even simpler and copies the source data into the temp
buffer and now uses the temp buffer to write the complete sector. So
only one SPI sector write is used now instead of 2 in the old version.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Gerlando Falauto <gerlando.falauto@keymile.com>
Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-04-22 16:49:51 +05:30
Andrey Skvortsov
a436d61279 kconfig: remove duplicated CMD_DNS option
two CMD_DNS options were added by commit 60296a835c ("commands: add more
command entries in Kconfig")

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-04-21 10:03:54 -04:00
Tim James
a095f047eb mii: add read-modify-write option to mii command
When accessing PHY registers it is often desirable to only update
selected bits, so it is necessary to first read the current value
before writing back an modified value with the relevant bits
updated.

To simplify this and to allow such operations to be incorporated
into simple shell scripts propose adding a 'modify' option to the
existing mii command, which takes a mask indicating the bits to
be updated in addition to a data value containing the new bits,
ie, <updated> = (<data> & <mask>) | (<current> & ~<mask>).

Signed-off-by: Tim <tim.james@macltd.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
Cc: Tom Rini <trini@konsulko.com>
Cc: Tim <tim.james@macltd.com>
2015-04-20 17:57:12 -05:00
Tom Rini
1733259d25 Merge branch 'master' of git://git.denx.de/u-boot-video 2015-04-20 09:13:52 -04:00
Sjoerd Simons
4a0bd1020f pxe: Ensure all memory access is to mapped memory
Properly map memory through map_sysmem so that pxe can be used from the
sandbox.

Tested in sandbox as well as on jetson-tk1, odroid-xu3, snow as peach-pi
boards

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-19 14:45:58 -06:00
Sjoerd Simons
9b97b6ba24 sandbox: Implement host dev [device]
A common pattern to check if a certain device exists (e.g. in
config_distro_bootcmd) is to use: <interface> dev [device]

Implement host dev [device] so this pattern can be used for sandbox host
devices.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-19 14:45:57 -06:00
Sjoerd Simons
bacfb1df95 sandbox: Renamed sb command to host
As suggested by Simon Glass, rename the sb command to host but keep the
old sb command as an alias

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-19 14:45:57 -06:00
Simon Glass
de79a7654b sandbox: exynos: Move CONFIG_CMD_SOUND to Kconfig
Move this over to Kconfig and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:38 -06:00
Simon Glass
ee2b24340f Kconfig: Move CONFIG_BOOTSTAGE to Kconfig
Move CONFIG_BOOT_STAGE and its associated options to Kconfig. Adjust
existing users and code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:37 -06:00
Simon Glass
c74c8e6651 dm: net: Adjust PHY interface to work with CONFIG_DM_ETH
When driver model is used for Ethernet a few functions are passed a udevice
instead of an eth_device. Also add a function to find a PHY type given its
name. This will be used to decode the device tree node.

Finally, put a phy_interface field in struct eth_pdata since this is an
important part of the platform data for Ethernet.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-18 11:11:36 -06:00
Simon Glass
ff97380015 Avoid calling print_eths() with driver model
This function is not supported with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-18 11:11:36 -06:00
Joe Hershberger
bc0571fc10 net: cosmetic: Fix checkpatch.pl failures in net.c
Finish eliminating CamelCase from net.c and other failures

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:35 -06:00
Joe Hershberger
4fd5055f59 net: cosmetic: Clean up cmd_net variables and functions
Make a thorough pass through all variables and function names contained
within common/cmd_net.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
786eac5f9d net: cosmetic: Clean up DNS variables and functions
Make a thorough pass through all variables and function names contained
within dns.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
6aede5b750 net: cosmetic: Clean up CDP variables and functions
Make a thorough pass through all variables and function names contained
within cdp.c and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:34 -06:00
Joe Hershberger
8885c5fe90 net: cosmetic: Clean up TFTP variables and functions
Make a thorough pass through all variables and function names contained
within tftp and remove CamelCase and improve naming.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00
Joe Hershberger
586cbe51ab net: cosmetic: Fixup var names for DHCP strings
Remove CamelCase variable naming.
Move the definition to the same compilation unit as the primary use.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Joe Hershberger
1411157d85 net: cosmetic: Fixup var names related to boot file
The variables around the bootfile were inconsistent and used CamelCase.
Update them to make the code more readable.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Joe Hershberger
049a95a775 net: cosmetic: Change IPaddr_t to struct in_addr
This patch is simply clean-up to make the IPv4 type that is used match
what Linux uses. It also attempts to move all variables that are IP
addresses use good naming instead of CamelCase. No functional change.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Simon Glass
697033cbf0 dm: usb: Support driver model with USB keyboards
Allow USB keyboards to work with driver model. The main difference is that
we can have multiple buses (each with its own device numbering) and each
bus must be scanned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:25 -06:00
Simon Glass
603afaf0e5 dm: usb: Split out the keyboard probe into its own function
Before adding driver model support, split out code from this over-long
function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:25 -06:00
Simon Glass
acf277af68 dm: usb: Convert usb_storage to driver model
Add support for scanning USB storage devices with driver model. This mostly
involves adding a USB device ID for storage devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:23 -06:00
Simon Glass
91557579af dm: usb: Move storage device scanning into its own function
The usb_stor_scan() function is quite long, so split out the code that scans
each device into its own function. Also, rather than setting up the block
device list once at the start, set it up as each device is scanned. This
makes it possible to use this code from driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:22 -06:00
Simon Glass
7fc2c1ea7b Revert "usb_storage : scan all interfaces to find a storage device"
This reverts commit cd749658d5.

The conflicts with this commit are hard for me to figure out. I will re-apply
it later.
2015-04-18 11:11:22 -06:00
Simon Glass
051081323f dm: usb: Adjust usb_storage to work with sandbox
With a few tweaks we can compile this code with sandbox and enable testing
of the USB storage layer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:22 -06:00
Simon Glass
84073b6f3c dm: usb: Simply device finding code in usb_storage
The for() loop is not needed since the value is immediately accessible.
Use this instead to simplify the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:22 -06:00
Simon Glass
1d5827a12e dm: usb: Fix type problems in usb_stor_get_info()
This function assumes that unsigned long is 32-bits wide, but it is not
on 64-bit machines. Use the correct type, and add a few debug() lines also.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:22 -06:00
Simon Glass
2e17c87ebb dm: usb: Move USB storage definitions to usb_defs.h
These are better off in a header file so they can be used by other code (e.g.
the sandbox USB storage emulator).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:22 -06:00
Simon Glass
054fe48eb2 dm: usb: Add driver model support for hubs
Adjust the existing hub code to support driver model, and add a USB driver
for hubs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:21 -06:00
Simon Glass
361ad6afc4 dm: usb: Split hub detection into its own function
Split out the hub detection logic so it can be used by driver model. Also
adjust the code to return errors correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:21 -06:00
Simon Glass
95fbfe4298 dm: usb: Convert core usb.c file to support driver model
Add the required #ifdefs and remove unwanted data structures so that the
USB uclass will be able to use this file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:21 -06:00
Simon Glass
0ed27905ce dm: usb: Complete the splitting up of usb_new_device()
This function now calls usb_setup_device() to set up the device and
usb_hub_probe() to check if it is a hub. The XHCI special case is now a
parameter to usb_setup_device(). The latter will be used by the USB uclass
when it is added, since it does not rely on any CONFIGs or legacy data
structures.

Signed-off-by: Simon Glass <sjg@chromium.org>
Bug-fixes for descriptor reading and usb_new_device() return value
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Tom Rini <trini@konsulko.com>
2015-04-18 11:11:21 -06:00
Simon Glass
91398f9854 dm: usb: Split out more code from usb_new_device()
Move the code that sets up the device with a new address into its own
function, usb_prepare_device().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:21 -06:00
Simon Glass
128fcac087 dm: usb: Move descriptor setup code into its own function
usb_new_device() is far too long and does far too much. As a first step, move
the code that does initial setup and reads a descriptor into its own function
called usb_setup_descriptor().

For XHCI the init order is different - we set up the device but don't
actually read the descriptor until after we set an address. Support this
option as a parameter to usb_setup_descriptor().

Avoid changing this torturous code more than necessary to make it easy to
review.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:21 -06:00
Simon Glass
862e75c0db dm: usb: Refactor port resets
Move the port reset code into its own function. Rename usb_hub_reset() to
indicate that is is now a legacy function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:20 -06:00
Simon Glass
53d8aa0f61 dm: usb: Drop the legacy USB init sequence
This CONFIG is not used anywhere in U-Boot, so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:20 -06:00
Simon Glass
6a1b206dc4 dm: usb: Convert 'usb' command to support driver model
Adjust this command to work with the new driver model uclass. It needs to
iterate through multiple independent controllers to find hubs, and work
through their children recursively in a different way. Otherwise the
functionality is much the same.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:20 -06:00
Simon Glass
79b5888729 dm: usb: Adjust usb_alloc_new_device() to return an error
This function returns NULL on error at present. Adjust it so that we can
return a real error, as is needed with driver model. Also improve the
error handling in its caller, usb_hub_port_connect_change(), and adjust
the code order to prepare for driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:20 -06:00
Simon Glass
cad4291cd0 dm: usb: Adjust usb command to prepare for driver model
Use 'udev' instead of 'dev' in a few places, reserving 'dev' for driver
model's struct udevice. Also adjust the code in a few minor ways to make
it easier to plumb in driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:20 -06:00
Simon Glass
7e0c77a2b8 cros_ec: Remove unused cros_ec_board_init() function
Now that driver model handles cros_ec init, we can drop this special code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:16 -06:00
Simon Glass
60f37fc6aa cros_ec: Drop unused CONFIG_DM_CROS_EC
Since all supported boards enable this option now, we can remove it along
with the old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:15 -06:00
Simon Glass
ba4575626e dm: x86: spi: Convert ICH SPI driver to driver model
Convert this driver over to use driver model. Since all x86 platforms use
it, move x86 to use driver model for SPI and SPI flash. Adjust all dependent
code and remove the old x86 spi_init() function.

Note that this does not make full use of the new PCI uclass as yet. We still
scan the bus looking for the device. It should move to finding its details
in the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:14 -06:00
Joe Hershberger
05c3e68f85 dm: eth: Add basic driver model support to Ethernet stack
First just add support for MAC drivers.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:12 -06:00
Joe Hershberger
85848f0377 cmd: net: Clean up return codes
The return codes in common/cmd_net.c had a number of inconsistencies.
Update them to all use the enum from command.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:11 -06:00
Joe Hershberger
d2eaec6006 net: Remove the bd* parameter from net stack functions
This value is not used by the network stack and is available in the
global data, so stop passing it around.  For the one legacy function
that still expects it (init op on old Ethernet drivers) pass in the
global pointer version directly to avoid changing that interface.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
2015-04-18 11:11:11 -06:00
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Hannes Petermaier
604c7d4a5a common/lcd_console: introduce display/framebuffer rotation
Sometimes, for example if the display is mounted in portrait mode or even if it
is mounted landscape but rotated by 180 degrees, we need to rotate our content
of the display respectively the framebuffer, so that user can read the messages
which are printed out.

For this we introduce the feature called "CONFIG_LCD_ROTATION", this may be
defined in the board-configuration if needed. After this the lcd_console will
be initialized with a given rotation from "vl_rot" out of "vidinfo_t" which is
provided by the board specific code.

If CONFIG_LCD_ROTATION is not defined, the console will be initialized with
0 degrees rotation.

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
[agust: fixed 'struct vidinfo' has no member named 'vl_rot' errors]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2015-04-18 17:40:37 +02:00
Hannes Petermaier
7471142cdf common/lcd_console: move single static variables into common (static) structure
For coming implementation of lcd_console rotation, we will need some more
variables for holding information about framebuffer size, rotation, ...

For better readability we catch all them into a common structure.

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-04-18 10:40:46 +02:00
Hannes Petermaier
a202c5bd24 common/lcd_console: ask only one-time for bg/fg-color per call
Don't call the lcd_getfgcolor and lcd_getbgcolor within the "draw-loop", this
only wastes time.

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-04-18 10:24:38 +02:00
Hannes Petermaier
97562c12f1 common/lcd_console: cleanup lcd_drawchars/lcd_putc_xy
the capability of drawing some *str with count from lcd_drawchars is unnary.
It is always called from lcd_putc_xy with one character of and count = 1.

So we simply rename lcd_drawchars into lcd_putc_xy and remove the loops inside.

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-04-18 10:12:36 +02:00
Simon Glass
ff3e077bd2 dm: pci: Add a uclass for PCI
Add a uclass for PCI controllers and a generic one for PCI devices. Adjust
the 'pci' command and the existing PCI support to work with this new uclass.
Keep most of the compatibility code in a separate file so that it can be
removed one day.

TODO: Add more header file comments to the new parts of pci.h

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:43 -06:00
Simon Glass
e564f054af dm: core: Add dev_get_uclass_priv() to access uclass private data
Add a convenience function to access the private data that a uclass stores
for each of its devices. Convert over most existing uses for consistency
and to provide an example for others.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
cc5e196e03 Correct map_sysmem() logic in do_mem_mw()
This function does not unmap what it maps. Correct it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-16 19:27:41 -06:00
Simon Glass
d4c671cc27 dm: Add a new CPU init function which can use driver model
Since driver model is set up after arch_cpu_init(), that function cannot
use drivers. Add a new arch_cpu_init_dm() function which is called
immediately after driver model is ready, and can reference devices.

This can be used to probe essential devices for the CPU.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-16 19:27:41 -06:00
Paul Kocialkowski
a32d279129 fastboot: Proper download gadget unregister and clear when cable is missing
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-04-14 10:19:05 +02:00
Michael Scott
8a41802f21 fastboot: check for alias when looking up partition by name
Implement an alias name check for devices where GPT limitations prevent
user-friendly partition names such as "boot", "system" and "cache". Or,
where the actual partition name doesn't match a standard partition name
used commonly with fastboot.

To set an alias, add an environment setting as follows:
fastboot_partition_alias_<alias partition name>=<actual partition name>

Example: fastboot_partition_alias_boot=LNX

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Acked-by: Steve Rae <srae@broadcom.com>
Cc: Steve Rae <srae@broadcom.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 10:19:04 +02:00
Heiko Schocher
0a9ac5cb5e dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts
trigger watchdog before calling usb_gadget_handle_interrupts()
This prevents board resets when calling dfu command on boards
which have a watchdog.

Signed-off-by: Heiko Schocher <hs@denx.de>
[ Reedition by Lukasz Majewski <l.majewski@samsung.com> to apply to
v2014.04 release ]
2015-04-14 10:18:49 +02:00
Fabio Estevam
ee02a65e99 cmd_usb_mass_storage: Use 'USB Mass Storage' in the help text
USB Mass Storage is the standard name, so let's use it here.

Suggested-by: Soeren Moch <smoch@web.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-04-14 09:50:47 +02:00
Inha Song
d281730f9c usb: gadget: thor: Invoke board specific USB cleanup interface
This patch invokes board-specific USB cleanup (board_usb_cleanup)
function in the thor gadget.

Signed-off-by: Inha Song <ideal.song@samsung.com>
2015-04-14 05:48:11 +02:00
Inha Song
375f2d785c usb: gadget: UMS: Invoke board specific USB cleanup interface
This patch invokes board-specific USB cleanup (board_usb_cleanup)
function in the mass storage gadget

Signed-off-by: Inha Song <ideal.song@samsung.com>
2015-04-14 05:48:11 +02:00
Kishon Vijay Abraham I
2d48aa69bd usb: modify usb_gadget_handle_interrupts to take controller index
Since we support multiple dwc3 controllers to be existent at the same
time, in order to handle the interrupts of a particular dwc3 controller
usb_gadget_handle_interrutps should take controller index as an
argument.

Hence the API of usb_gadget_handle_interrupts is modified to take
controller index as an argument and made the corresponding changes to all
the usb_gadget_handle_interrupts calls.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:11 +02:00
Kishon Vijay Abraham I
db378d786d common: cmd_dfu: invoke board_usb_cleanup() for cleaning up
Invoked board_usb_cleanup for cleaning up initialized USB. It
will be invoked if the user enterts ctrl-C.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:11 +02:00
Tim Harvey
319418c01c usb: hub: allow pgood_delay to be specified via env
Some USB devices break the spec and require longer warm-up times. Allow
the usb_pgood_delay env variable to override the calculated time.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-14 05:47:48 +02:00
Stephen Warren
25c0673635 usb: fix first descriptor fetch error handling
When fetching the first descriptor from a new device, only validate that
we received at least 8 bytes, not that we received the entire descriptor.
The reasoning is:
- The code only uses fields in the first 8 bytes, so that's all we need
  to have fetched at this stage.
- The smallest maxpacket size is 8 bytes. Before we know the actual
  maxpacket the device uses, the USB controller may only accept a single
  packet (see the DWC2 note in the comment added in the commit).
  Consequently we are only guaranteed to receive 1 packet (at least 8
  bytes) even in a non-error case.

Fixes: 1a7758044b04 ("usb: Early failure when the first descriptor read
fails or is invalid")
Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-04-14 05:47:48 +02:00
Paul Kocialkowski
04ee6ee2ca usb: Early failure when the first descriptor read fails or is invalid
This may happen when using an USB1 device on a controller that only supports
USB2 (e.g. EHCI). Reading the first descriptor will fail (read 0 byte), so we
can abort the process at this point instead of failing later and wasting time.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-04-14 05:47:48 +02:00
Paul Kocialkowski
8879be8857 usb: Check usb_new_device for failure
This checks that a new USB device is correctly initialized and frees it if not.
In addition, this doesn't report that USB was started when no device was found.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-04-14 05:47:48 +02:00
Paul Kocialkowski
5a80b3449b usb: usb_new_device return codes consistency
This makes use of errno return codes for representing error codes in a unified
way.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-04-14 05:47:48 +02:00
Sergey Temerkhanov
f657087134 usb_storage:Fix USB storage capacity detection on 64 bit architectures
This patch fixes USB storage capacity detection breakage on 64-bit systems
which arises due to 'unsigned long' length difference. Old code assumes that
to be 32 bit and breaks because of inappropriate response buffer layout.
Also this fixes a number of build warnings and changes big-endian values
treatment style to be architecture-independent

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
2015-04-14 05:47:48 +02:00
Franck Jullien
cd749658d5 usb_storage : scan all interfaces to find a storage device
Mass storage is not necessary present on interface 0. This
patch allow usb_stor_scan to look in every available interface.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
2015-04-14 05:47:47 +02:00
Linus Walleij
4bb6650632 common/armflash: Support for ARM flash images
The ARM reference designs all use a special flash image format
that stores a footer (two versions exist) at the end of the last
erase block of the image in flash memory.

Version one of the footer is indicated by the magic number
0xA0FFFF9F at 12 bytes before the end of the flash block and
version two is indicated by the magic number 0x464F4F54 0x464C5348
(ASCII for "FLSHFOOT") in the very last 8 bytes of the erase block.

This command driver implements support for both versions of the
AFS images (the name comes from the Linux driver in drivers/mtd/afs.c)
and makes it possible to list images and load an image by name into
the memory with these commands:

afs - lists flash contents
afs load <image> - loads image to address indicated in the image
afs load <image> <addres> - loads image to a specified address

This image scheme is used on the ARM Integrator family, ARM
Versatile family, ARM RealView family (not yet supported in U-Boot)
and ARM Versatile Express family up to and including the new
Juno board for 64 bit development.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-10 11:54:08 -04:00
Tom Rini
59064346dd Merge branch 'master' of git://git.denx.de/u-boot-arm 2015-04-10 11:54:07 -04:00
Stefan Agner
6d0f452608 common, ubi: use positive return values for ubi check
The ubi check command is expected to not fail and just check whether
a volume exist or not. Currently, when a volume does not exist, the
command fails which leads to an error:
"exit not allowed from main input shell."

Use 1 to indicate that a volume does not exist. This allows to use
ubi check in an if statement, e.g.
if ubi check rootfs; then; echo "exists"; else; echo "not there"; fi
2015-04-10 11:54:06 -04:00
Albert ARIBAUD \(3ADEV\)
8c80eb3b53 Introduce CONFIG_SPL_PANIC_ON_RAW_IMAGE
introduce CONFIG_SPL_PANIC_ON_RAW_IMAGE.
An SPL which define this will panic() if the
image it has loaded does not have a mkimage
signature.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-04-10 14:23:37 +02:00
Albert ARIBAUD \(3ADEV\)
39f520bb62 lpc32xx: add lpc32xx-spl.bin boot image target
Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-04-10 14:23:26 +02:00
Tom Rini
adcc570599 cmd_mem.c: Update 'iteration_limit' to unsigned long
With e37f1eb we now use strict_strtoul() in do_mem_mtest() and this
gives us a warning:
../include/vsprintf.h:38:5: note: expected 'long unsigned int *' but
argument is of type 'int *'

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-07 09:38:54 -04:00
Pavel Machek
e37f1eb45c cmd_mem: cleanups, catch bad usage
Currently, memtest will silently accept bad data. Perform error
checking on user intput.

Signed-off-by: Pavel Machek <pavel@denx.de>
2015-04-07 08:41:10 -04:00
Mario Schuknecht
5e8397dd94 env_sf: Fix recovery default
The u-boot environment is redundantly stored in a NOR flash on our boards.
Redundant means that there are two places to store the environment. But only
one of the two is active. I discovered that on one board the u-boot (env_sf)
uses the environment from the second place and the Kernel (fw_printenv) uses
the environment from the first place.
To decide which is the active environment there is a byte inside the
environment. 1 means active and 0 means obsolete. But on that board both
environments had have a 1. This can happen if a power loss or reset occurs
during writing the environment. In this situation the u-boot (env_sf)
implementation uses the second environment as default. But the Kernel
(fw_printenv) implementation uses the first environment as default.

This commit corrects the default in the u-boot env_sf implementation when a
problem was detected. Now the recovery default is the same like in all other
environment implementations. E.g. fw_printenv and env_flash. This ensures that
u-boot and Kernel use the same environment.

Signed-off-by: Mario Schuknecht <mario.schuknecht@dresearch-fe.de>
2015-04-07 08:41:10 -04:00
Alexey Brodkin
3fb8016360 arc: clean-up init procedure
Intention behind this work was elimination of as much assembly-written
code as it is possible.

In case of ARC we already have relocation fix-up implemented in C so why
don't we use C for U-Boot copying, .bss zeroing etc.

It turned out x86 uses pretty similar approach so we re-used parts of
code in "board_f.c" initially implemented for x86.

Now assembly usage during init is limited to stack- and frame-pointer
setup before and after relocation.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
2015-04-03 09:47:49 +03:00
Peter Tyser
004a1fdb45 nand: yaffs: Remove the "nand write.yaffs" command
This command is only enabled by one board, complicates the NAND code,
and doesn't appear to have been functioning properly for several
years.  If there are no bad blocks in the NAND region being written
nand_write_skip_bad() will take the shortcut of calling nand_write()
which bypasses the special yaffs handling.  This causes invalid YAFFS
data to be written. See
http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for
an example and a potential workaround.

U-Boot still retains the ability to mount and access YAFFS partitions
via CONFIG_YAFFS2.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2015-03-30 23:24:39 -05:00
Peter Tyser
6b94f118a2 cmd_nand: Verify writes to NAND
Previously NAND writes were only verified when CONFIG_MTD_NAND_VERIFY_WRITE
was defined.  On boards without this define writes could fail silently.
Boards with CONFIG_MTD_NAND_VERIFY_WRITE could prematurely report
failures which ECC could correct.

Add a verification step after all "nand write[.x]" commands to ensure the
writes were successful.  The verification uses ECC for for "normal"
writes, but does not for raw and yaffs writes.  Some test cases which
inject fake bad bits on a 2K page flash are below.

Test cases with CONFIG_MTD_NAND_VERIFY_WRITE defined:
  Example of an ECC write which previously failed when
  CONFIG_MTD_NAND_VERIFY_WRITE was defined, but now succeeds because ECC
  is used during verification:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10020 0xfe 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000020 0x01 1
      nand write 0x1000000 0x800 0x1800

Test cases without CONFIG_MTD_NAND_VERIFY_WRITE defined:
  Example of an ECC write which previously silently failed:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10020 0x00 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000020 0xff 1
      nand write 0x1000000 0x800 0x1800

  Example of a raw write which previously failed silently due to stuck
  data bit, but now errors out:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10020 0xfe 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000020 0x01 1
      nand write.raw 0x1000000 0x800 3

  Example of a raw write which previously failed silently due to stuck OOB
  bit, but now errors out:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10810 0xfe 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000810 0x01 1
      nand write.raw 0x1000000 0x800 3

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-03-30 23:24:38 -05:00
angelo@sysam.it
944ab340b6 m68k: fix 3 broken boards
Fix eb_cpu5282 and eb_cpu5282_internal unresolved external error.
These boards have video but don't need any ppc related
video_setmem().

Fix M53017EVB moving away embedded env to a different offset,
as in M52277EVB.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2015-03-28 12:07:46 -04:00
Alexey Brodkin
5bcd19aa29 common/board_f: move board_init_f_mem() from #else CONFIG_X86
Purpose of this change is to make it possible to re-use code currently
used on X86 solely for other architectures. For example:
 * init_sequence_f_r
 * board_init_f_r

Even though board_init_f_mem() has nothing to do with any particular
architecture it won't work (at least in current implementation) for X86.

This is because on X86 "gd" is an alias to function get_fs_gd_ptr(),
thus we cannot assign anything to it.

So this change separates selection of board_init_f_mem() from X86 while
keeping it disabled for X86 still.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2015-03-28 12:07:46 -04:00
Sjoerd Simons
0798d6fd41 part: Add support for list filtering on bootable partitions
Add an optional -bootable parameter to the part list commands to only
put the list of bootable partitions in the environment variable

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-03-25 12:15:15 -04:00
Rob Herring
7682a99826 remove unnecessary version.h includes
Various files are needlessly rebuilt every time due to the version and
build time changing. As version.h is not actually needed, remove the
include.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Macpaul Lin <macpaul@andestech.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: York Sun <yorksun@freescale.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Cc: "David Müller" <d.mueller@elsoft.ch>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Torsten Koschorrek <koschorrek@synertronixx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
2015-03-24 10:50:50 -04:00
Tom Rini
a538ae997a Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-03-18 07:07:43 -04:00
Stefan Roese
14a380a8f3 common/board_f.c: Enable IMX watchdog in init_func_watchdog_init()
Without this patch, the IMX watchdog will not be initialized. And therefor
not active. This patch fixes this by calling hw_watchdog_init() also when
CONFIG_IMX_WATCHDOG is defined.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-03-13 13:31:56 +01:00
Tom Rini
b79dadf846 Merge branch 'master' of git://git.denx.de/u-boot-tegra
Conflicts:
	README

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-10 19:09:18 -04:00
Siva Durga Prasad Paladugu
44c8fd3aba common: cmd_elf: Add support to disable start of application
Added support to disable the start of application by using
a environment variable autostart

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-03-09 11:13:29 -04:00
Jan Kiszka
671fa63e79 common/board_r: Restore non-cached memory setup
This fixes a regression of e310b93ec1, affecting Ethernet on the Jetson
TK1, e.g.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2015-03-09 11:13:29 -04:00
Przemyslaw Marczak
0aa8a4ad99 dlmalloc: do memset in malloc init as new default config
This commit introduces new config: CONFIG_SYS_MALLOC_CLEAR_ON_INIT.

This config is an expert option and is enabled by default.

The all amount of memory reserved for the malloc, is by default set
to zero in mem_malloc_init(). When the malloc reserved memory exceeds
few MiB, then the boot process can slow down.

So disabling this config, is an expert option to reduce the boot time,
and can be disabled by Kconfig.

Note:
After disable this option, only calloc() will return the pointer
to the zeroed memory area. Previously, without this option,
the memory pointed to untouched malloc memory region, was filled
with zeros. So it means, that code with malloc() calls should
be reexamined.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-09 11:13:28 -04:00
Fabio Estevam
e5d3e7fcbe cmd_usb_mass_storage: Remove extra 'ums' string in the usage text
Currently the usage text for the 'ums' command looks like this:

Usage:
ums ums <USB_controller> [<devtype>] <devnum>  e.g. ums 0 mmc 0

,so remove the extra 'ums' in the text.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Marek Vasut <marex@denx.de>
2015-03-05 20:50:29 -05:00
Alexey Brodkin
7bf9f20d02 common/board_f: implement type casting for gd structure
In case of global data structure defined as "register volatile" compiler
throws an warning about incorrect type used:
 --->8---
 common/board_f.c: In function "board_init_f_r":
 common/board_f.c:1073:2: warning: passing argument 1 of "&board_init_r
 +(sizetype)gd->reloc_off" discards "volatile" qualifier from pointer
 target type [enabled by default]
  (board_init_r + gd->reloc_off)(gd, gd->relocaddr);
  ^
 common/board_f.c:1073:2: note: expected "struct gd_t *" but argument is
 of type "volatile struct gd_t *"
 --->8---

An obvious fix is manual casting to "gd_t *".

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-03-05 20:50:29 -05:00
Heiko Schocher
ff6c032ea8 spl: fix calling "spl export .." more than once
running "spl export ..." more than once fails with:

Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
ERROR prep subcommand failed!
Subcommand failed

reason is commmit:
35fc84fa1f: Refactor the bootm command to reduce code duplication

It used "state != BOOTM_STATE_START" but state is a bitfield, so
check if the bit BOOTM_STATE_START is not set. With this fix,
"spl export ..." can called more than once ...

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-05 20:50:28 -05:00
Alison Wang
1313db48e2 m68k: Add generic board support for MCF547X/8X and MCF5445X
This patch adds generic board support for MCF547X/8X and MCF5445X.
It is based on the patch about common generic board support for
M68K architecture sent by Angelo.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
2015-03-05 20:13:22 -05:00
angelo@sysam.it
e310b93ec1 m68k: add generic-board support
Add generic-board support for the m68k architecture.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2015-03-05 20:13:21 -05:00
Peter Tyser
5bd15b7a50 cmd_yaffs: Clean up command usage messages
Remove duplicate command names in usage messages to fix issues such as:
  => help yls
  yls - yaffs ls

  Usage:
  yls yls [-l] dirname

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2015-03-05 20:13:20 -05:00
Hannes Petermaier
1b7caf1123 common/lcd: Add command for writing to lcd-display
Sometimes we do not want redirect u-boot's console to screen but anyway we want
write out some status information out of a u-boot script to the display.

So we cannot use the normal "echo ....", instead we write explicitly using
"lcdputs ..." for writing to the actual cursor position on LCD.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:16 -05:00
Hannes Petermaier
d38d0c6a33 common/lcd: Add command for setting cursor within lcd-console
Sometimes we do not want redirect u-boot's console to screen but anyway we want
write out some status information out of a u-boot script to the display.

To define the specific position of the string to be written, we have to set
the cursor with "setcurs" before writing.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:16 -05:00
Rob Herring
0c7e8d1317 gpt: support random UUIDs without setting environment variables
Currently, an environment variable must be used to store the randomly
generated UUID for each partition. This is not necessary, so make storing
the UUID optional. Now passing uuid_disk and uuid are optional when random
UUIDs are enabled.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-03-05 11:17:53 -05:00
Rob Herring
a150e6c9df gpt: fix error reporting on partition table write failures
The gpt command always reports success even if writing the partition table
failed. Propagate the return value of gpt_restore so we get proper status
reported.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-03-05 11:17:53 -05:00
Stefano Babic
9b5b60a05c Merge branch 'master' of git://git.denx.de/u-boot 2015-03-05 16:05:10 +01:00
Nikolaos Pasaloukos
41ffb45c35 kconfig: common: Fix memtest bool name
Fix the name appearing in menuconfig for memtest command

Signed-off-by: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com
2015-03-05 09:23:39 -05:00
Tom Rini
02ebe6f702 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-03-05 07:22:18 -05:00
Simon Glass
db910353a1 arm: spl: Allow board_init_r() to run with a larger stack
At present SPL uses a single stack, either CONFIG_SPL_STACK or
CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and
environment) require a lot of stack, some boards set CONFIG_SPL_STACK to
point into SDRAM. They then set up SDRAM very early, before board_init_f(),
so that the larger stack can be used.

This is an abuse of lowlevel_init(). That function should only be used for
essential start-up code which cannot be delayed. An example of a valid use is
when only part of the SPL code is visible/executable, and the SoC must be set
up so that board_init_f() can be reached. It should not be used for SDRAM
init, console init, etc.

Add a CONFIG_SPL_STACK_R option, which allows the stack to be moved to a new
address before board_init_r() is called in SPL.

The expected SPL flow (for CONFIG_SPL_FRAMEWORK) is documented in the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
For version 1:
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-04 14:55:04 -05:00
Stephen Warren
1e4d11a58c common: board: support systems with where RAM ends beyond 4GB
Some systems have so much RAM that the end of RAM is beyond 4GB. An
example would be a Tegra124 system (where RAM starts at 2GB physical)
that has more than 2GB of RAM.

In this case, we can gd->ram_size to represent the actual RAM size, so
that the actual RAM size is passed to the OS. This is useful if the OS
implements LPAE, and can actually use the "extra" RAM.

However, U-Boot does not implement LPAE and so must deal with 32-bit
physical addresses. To this end, we enhance board_get_usable_ram_top() to
detect the "over-sized" case, and limit the relocation addres so that it
fits into 32-bits of physical address space.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-03-04 10:08:55 -07:00
Tom Rini
57c6941b43 Merge git://git.denx.de/u-boot-usb 2015-03-02 07:24:27 -05:00
Stefano Babic
b9cb64825b Merge branch 'master' of git://git.denx.de/u-boot 2015-03-02 09:42:53 +01:00
Tom Rini
1606b34aa5 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2015-02-25 18:14:18 -05:00
gaurav rana
94e3c8c4fd crypto/fsl - Add progressive hashing support using hardware acceleration.
Currently only normal hashing is supported using hardware acceleration.
Added support for progressive hashing using hardware.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-25 13:20:02 -08:00
gaurav rana
7ee8c4795d crypto/fsl: Make function names consistent for blob encapsulation/decapsulation.
This patch does the following:

1. The function names for encapsulation and decapsulation
were inconsitent in freescale's implementation and cmd_blob file.
This patch corrects the issues.
2. The function protopye is also modified to change the length parameter
from u8 to u32 to allow encapsulation and decapsulation of larger images.
3. Modified the description of km paramter in the command usage for better
readability.

Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Reviewed-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-25 13:19:48 -08:00
Dileep Katta
e874207134 fastboot: Correct fastboot_fail and fastboot_okay strings
If the string is copied without NULL termination using strncpy(),
then strncat() on the next line, may concatenate the string after
some stale (or random) data, if the response string was not
zero-initialized.

Signed-off-by: Dileep Katta <dileep.katta@linaro.org>
Reviewed-by: Steve Rae <srae@broadcom.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-25 17:47:02 +01:00
Rob Herring
7c23bcb93f fastboot: Add USB cable detect check
Add a check for USB cable attached and only enter fastboot when a cable
is attached.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Steve Rae <srae@broadcom.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-25 17:47:02 +01:00
Dileep Katta
897923819c usb: gadget: fastboot: Add fastboot erase
Adds the fastboot erase functionality, to erase a partition
specified by name. The erase is performed based on erase group size,
to avoid erasing other partitions. The start address and the size
is aligned to the erase group size for this.

Currently only supports erasing from eMMC.

Signed-off-by: Dileep Katta <dileep.katta@linaro.org>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-25 17:47:02 +01:00
Masahiro Yamada
d648964fc2 kconfig: remove unneeded dependency on !SPL_BUILD
Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-24 17:06:27 -05:00
Pantelis Antoniou
4b7cee5336 mmc: Implement SD/MMC versioning properly
The SD/MMC version scheme was buggy when dealing with standard
major.minor.change cases. Fix it by using something similar to
the linux's kernel versioning method.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Reported-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2015-02-23 19:34:29 +02:00
Lubomir Popov
ed16f14689 cmd_i2c: Provide option for bulk 'i2c write' in one transaction
I2C chips do exist that require a write of some multi-byte data to occur in
a single bus transaction (aka atomic transfer), otherwise either the write
does not come into effect at all, or normal operation of internal circuitry
cannot be guaranteed. The current implementation of the 'i2c write' command
(transfer of multiple bytes from a memory buffer) in fact performs a separate
transaction for each byte to be written and thus cannot support such types of
I2C slave devices.

This patch provides an alternative by allowing 'i2c write' to execute the
write transfer of the given number of bytes in a single bus transaction if
the '-s' option is specified as a final command argument. Else the current
re-addressing method is used.

Signed-off-by: Lubomir Popov <l-popov@ti.com>

hs: adapt to CONFIG_DM_I2C
2015-02-19 09:03:40 +01:00
Masahiro Yamada
9e533cb046 cmd_i2c: quit I2C commands immediately on error
If the i2c driver returns an error status, error out immediately.
Continuing the loop just results in printing error messages
again and again.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-19 08:44:21 +01:00
Tom Rini
1320112c8a Merge branch 'master' of git://git.denx.de/u-boot-fdt 2015-02-18 08:46:50 -05:00
Joe Hershberger
c71a0164d9 cmd_fdt: Print the control fdt in terms of virtual memory
If you want to inspect the control device tree using the fdt command,
the "fdt address -c" command previously unhelpfully printed the phys
memory address of the device tree. That address could not then be used
to set the fdt address for inspection. Changed the resulting print to
one that can be copied directly to the 'fdt address <addr>' command.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-17 20:19:16 -07:00
Joe Hershberger
90fbee3e40 cmd_fdt: Actually fix fdt command in sandbox
Commit 90bac29a76 claims to fix this bug
that was introduced in commit a92fd6577e
but doesn't actually make the change that the commit message describes.

Actually fix the bug this time.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-17 20:19:16 -07:00
Tom Rini
9ec84f103b Merge branch 'master' of git://git.denx.de/u-boot-avr32 2015-02-17 22:11:36 -05:00
Andreas Bießmann
a752a8b4c4 avr32: add generic board support
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-02-17 22:54:38 +01:00
Andreas Bießmann
c722f0b026 common/board_r: allocate bootparams
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-17 22:52:43 +01:00
Andreas Bießmann
68145d4c7b common/board_f: factor out reserve_stacks
Introduce arch_reserve_stacks() to tailor gd->start_addr_sp and gd->irq_sp to
the architecture needs.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-17 22:52:42 +01:00
Tom Rini
a851604ca3 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2015-02-17 06:27:44 -05:00
Christian Gmeiner
189d257b7a cmd_eeprom: make it possible to define the used i2c bus
A SoC like the i.MX6 supports more then one i2c bus. In oder to be
able to use the eeprom command add a new define to specify the
i2c bus to use. If CONFIG_SYS_I2C_EEPROM_BUS is not defined there
is no functional change, else a call to i2c_set_bus_num(..) is
done before calling i2c_read(..) and i2c_write(..).

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-17 10:42:53 +01:00
Heiko Schocher
b9ea0c3a20 spl, spl_nor: fix compiler warning
executing "tools/buildman/buildman mpc5xx" drops this warning:

common/spl/spl_nor.c: In function 'spl_nor_load_image':
common/spl/spl_nor.c:26:10: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]

fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-02-16 15:48:34 -05:00
Simon Glass
c01c71bc16 arm: spl: Provide for a board-specific loader
Some boards have a special way of loading U-Boot that does not fit with
the existing SPL code. For example sunxi uses an 'FEL' mode where U-Boot
is loaded over USB. Add a CONFIG option and boot mode for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-02-16 20:15:06 +01:00
Axel Lin
364ac5b583 image: Convert to use fdt_for_each_subnode macro
Use fdt_for_each_subnode macro to simplify the code a bit.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-16 12:41:41 -05:00
Simon Glass
f058f154a9 dm: Add CMD_DM and CMD_DEMO to Kconfig
Add Kconfig settings for these two options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:34 -07:00
Simon Glass
ca88b9b939 dm: i2c: Add a dm_ prefix to driver model bus speed functions
As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model
versions of these functions to avoid conflicts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-02-12 10:35:33 -07:00
Simon Glass
74d0186766 Introduce board_init_f_mem() to handle early memory layout
At present on some architectures we set up the following before calling
board_init_f():

   - global_data
   - stack
   - early malloc memory

Adding the code to support early malloc and global data setup to every
arch's assembler start-up is a pain. Also this code is not actually
architecture-specific. We can use common code for all architectures and
with a bit of care we can write this code in C.

Add a new function to deal with this. It should be called after memory
is available, with a pointer to the top of the area that should be used
before relocation. The function will set things up and return the lowest
memory address that it allocated/used. That can then be set as the top
of the stack.

Note that on some archs this function will use the stack, so the stack
pointer should be set to same value as is pased to board_init_f_mem().
A margin of 128 bytes will be left for this stack, so that it is not
overwritten. This means that 64 bytes is wasted by this early call.
This is not strictly necessary on several more modern archs, so we could
remove this at the cost of some arch-dependent code.

With this function there is no-longer any need for the assembler code to
zero global_data or set up the early malloc pointers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:29 -07:00
Hans de Goede
2c8571703a malloc_simple: Return NULL on malloc failure rather then calling panic()
All callers of malloc should already do error checking, and may even be able
to continue without the alloc succeeding.

Moreover, common/malloc_simple.c is the only user of .rodata.str1.1 in
common/built-in.o when building the SPL, triggering this gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303

Causing .rodata to grow with e.g. 0xc21 bytes, nullifying all benefits of
using malloc_simple in the first place.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:29 -07:00
Peter Tyser
b922a5f94d dm: Prevent "demo hello" and "demo status" segfaults
Segfaults can occur when a mandatory argument is not provided to
"demo hello" and "demo status".  Eg:

   => demo hello
   Segmentation fault (core dumped)

Add a check to ensure all required arguments are provided.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:29 -07:00
Tom Rini
db7a7dee68 Merge branch 'master' of git://git.denx.de/u-boot-x86 2015-02-10 10:42:56 -05:00
Tom Rini
c956662cc3 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2015-02-10 10:42:22 -05:00
Tom Rini
0dac731d19 Merge branch 'master' of git://git.denx.de/u-boot-video
Conflicts:
	include/splash.h

Signed-off-by: Tom Rini <trini@ti.com>
2015-02-10 10:41:54 -05:00
Tom Rini
307367eaff Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-02-10 10:40:43 -05:00
Nikita Kiryanov
7bf71d1f55 lcd: split splash code into its own function
lcd_logo() currently performs tasks well beyond just displaying the logo.
It has code which displays splash image, it has logic which determines
when the different display features are displayed, and it is coupled with
the lcd console because it holds the responsibility of returning the
lcd console base address.

Make lcd_logo() just about the logo by:
* Moving splash image display code into a dedicated function
* Moving the logic regarding when various features are displayed to
  lcd_clear() (which is arguably not the correct name for housing such
  code either, but it is currently the most fitting location code wise)
* Move the responsibility of setting the console base address to
  lcd_clear() too.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:31:58 +01:00
Nikita Kiryanov
033167c4c5 lcd: dt: extract simplefb support
We now have api functions that can support compiling simplefb code as its own
module. Since this code is not part of the display functionality, extract it
to its own file.

Raspberry Pi is updated to accommodate the changes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2015-02-10 13:31:26 +01:00
Nikita Kiryanov
bf21a5deb9 lcd: rename bitmap_plot to better represent its functionality
The name "bitmap_plot" is misleading because it implies that this is a generic
function capable of dealing with any bitmap, but its implementation only works
with the logo data.

Rename the function to better reflect this.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:30:49 +01:00
Nikita Kiryanov
c8d2febcc7 lcd: various cleanups
This cleanup mostly focuses on removing unnecessary whitespace and comments
which are superfluous and/or do not conform to the coding style.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:30:20 +01:00
Nikita Kiryanov
8ddfe2fad8 lcd: remove unused includes
Remove unused includes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:29:44 +01:00
Nikita Kiryanov
0b29a8969e lcd: introduce lcd_set_cmap
Reduce the lcd_display_bitmap #ifdef complexity by extracting Atmel-specific
code for setting cmap for bitmap images into a new function lcd_set_cmap().
A default version is implemented with the remainder of the code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:29:02 +01:00
Nikita Kiryanov
2306457c45 lcd: logo: move generic cmap setting to lcd_logo_set_cmap()
Get rid of platform-specific #ifdefs in bitmap_plot() by moving the generic
case of setting cmap into the weak lcd_logo_set_cmap().

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:28:30 +01:00
Nikita Kiryanov
0ee261f6d3 lcd: mpc823: move mpc823-specific lcd_logo_set_cmap code to mpc8xx_lcd.c
Reduce the bitmap_plot #ifdef complexity by extracting MPC823-specific code for
setting cmap into its own implementation of lcd_logo_set_cmap(), implemented in
mpc8xx_lcd.c. In the MPC823 implementation, ARRAY_SIZE(bmp_logo_palette) is
switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which
would cause a compilation error because the logo data and palette arrays would
be defined twice.

This is a step towards cleaning bitmap_plot() of platform-specific code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:27:58 +01:00
Nikita Kiryanov
a02e948139 lcd: atmel: introduce lcd_logo_set_cmap
Reduce the bitmap_plot #ifdef complexity by extracting Atmel-specific code for
setting cmap into a new function lcd_logo_set_cmap(), which is implemented in
atmel_lcdfb driver and defined as part of common/lcd.c api with a weak dummy
version. In the Atmel implementation, ARRAY_SIZE(bmp_logo_palette) is
switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which
would cause a compilation error because the logo data and palette arrays would
be defined twice.

This is a step towards cleaning bitmap_plot() of platform-specific code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:27:28 +01:00
Nikita Kiryanov
27fad01b7f lcd: mpc8xx: move mpc823-specific fb_put_byte to mpc8xx_lcd.c
Reduce the amount of platform-specific code in common/lcd.c by moving MPC823
implementation of fb_put_byte() to mpc8xx_lcd.c. Since we must also have a
default implementation for everybody else, make the remainder of the code
into a weak function.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:26:53 +01:00
Nikita Kiryanov
b3d12e9bca lcd: atmel: move atmel-specific fb_put_word to atmel_lcdfb
Reduce the amount of platform-specific code in common/lcd.c by moving Atmel
implementation of fb_put_word() to atmel_lcdfb.c. Since we must also have a
default implementation for everybody else, make the remainder of the code
into a weak function.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:25:56 +01:00
Nikita Kiryanov
38b550877f lcd: split configuration_get_cmap
configuration_get_cmap() is multiple platform-specific functions stuffed into
one function. Split it into multiple versions, and move each version to the
appropriate driver to reduce the #ifdef complexity.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:25:08 +01:00
Michal Simek
de86765bc4 bdinfo: Show information about fdt blob via bdinfo
Microblaze target supports both OF and !OF cases
and from log is not clear which version is running.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:05 +01:00
Michal Simek
e945f6dc28 microblaze: Move architecture to use generic board init
Compile code with -fPIC to get GOT. Do not build SPL
with fPIC because it increasing SPL size for nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:11:56 +01:00
Andreas Bießmann
61d7b1bb5f common/board_r: manual relocation for cmd table
This is required for architectures still need manual relocation like avr32, mk68
and others.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:09:42 +01:00
Heiko Schocher
2b8b38eaca common/board_f: add at91 wdt
call hw_watchdog_init() also if CONFIG_AT91SAM9_WATCHDOG
is used.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-07 23:43:18 +01:00
Simon Glass
abbdb26257 scsi: bootstage: Measure time taken to scan the bus
On some hardware this time can be significant. Add bootstage support for
measuring this. The result can be obtained using 'bootstage report' or
passed on to the Linux via the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-06 12:07:38 -07:00
Tom Rini
8e3da9dd11 Merge branch 'master' of git://git.denx.de/u-boot-dm 2015-01-30 09:24:42 -05:00
Michal Simek
2d73f0d6cd fpga: Extend dump description
There are missing parameters in help which fpga dump command
requires.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-30 09:19:17 -05:00
Bin Meng
89fc8bbf44 cmd: Fix gettime command help
Remove the additional ',' and '\n' from the gettime command help.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-30 09:19:16 -05:00
Ruchika Gupta
b37b46f042 rsa: Use checksum algorithms from struct hash_algo
Currently the hash functions used in RSA are called directly from the sha1
and sha256 libraries. Change the RSA checksum library to use the progressive
hash API's registered with struct hash_algo. This will allow the checksum
library to use the hardware accelerated progressive hash API's once available.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Fixed build error in am335x_boneblack_vboot due to duplicate CONFIG_DM)

Change-Id: Ic44279432f88d4e8594c6e94feb1cfcae2443a54
2015-01-29 17:09:59 -07:00
Ruchika Gupta
2dd9002719 Use hash.c in mkimage
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:59 -07:00
Ruchika Gupta
46fe2c0444 hash: Add function to find hash_algo struct with progressive hash
The hash_algo structure has some implementations in which progressive hash
API's are not defined. These are basically the hardware based implementations
of SHA. An API is added to find the algo which has progressive hash API's
defined. This can then be integrated with RSA checksum library which uses
Progressive Hash API's.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:59 -07:00
Martin Dorwig
49cad54788 Export redesign
this is an atempt to make the export of functions typesafe.
I replaced the jumptable void ** by a struct (jt_funcs) with function pointers.
The EXPORT_FUNC macro now has 3 fixed parameters and one
variadic parameter
The first is the name of the exported function,
the rest of the parameters are used to format a functionpointer
in the jumptable,

the EXPORT_FUNC macros are expanded three times,
1. to declare the members of the struct
2. to initialize the structmember pointers
3. to call the functions in stubs.c

Signed-off-by: Martin Dorwig <dorwig@tetronik.com>
Acked-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
(resending to the list since my tweaks are not quite trivial)
2015-01-29 17:09:57 -07:00
Simon Glass
25ab4b0303 dm: i2c: Provide an offset length parameter where needed
Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-01-29 17:09:53 -07:00
Simon Glass
f9a4c2da72 dm: i2c: Rename driver model I2C functions to permit compatibility
Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
a02af4aeec dm: demo: Add a simple GPIO demonstration
Add a new 'demo light' command which uses GPIOs to control imaginary lights.
Each light is assigned a bit number in the overall value. This provides an
example driver for using the new GPIO API.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Masahiro Yamada
0365ffcc0b generic-board: show model name in board_init_f() too
The common/board_r.c has show_model_r() to display the model name
if the DTB has a "model" property.  It sounds useful to have a similar
function in common/board_f.c too because most of the boards show
their board name before relocation.

Instead of implementing the same function in both common/board_f.c
and common/board_r.c, let's split it up into common/show_board_info.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:49 -07:00
Masahiro Yamada
5468461d1e cmd_i2c: change variable type for 10bit addressing support
To store 10bit chip address, the variable type should not be uchar,
but uint.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher<hs@denx.de>
2015-01-29 17:09:49 -07:00
Michal Simek
e3046ba4da common: bootm: Document fake bootm sub-command
Fake option is enabled only when CONFIG_TRACE is
enabled in common/bootm.c:do_boot_states().

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-29 13:38:42 -05:00
Guilherme Maciel Ferreira
39931f966a dumpimage: fit: extract FIT images
The dumpimage is able to extract components contained in a FIT image:

  $ ./dumpimage -T flat_dt -i CONTAINER.ITB -p INDEX FILE

The CONTAINER.ITB is a regular FIT container file. The INDEX is the poisition
of the sub-image to be retrieved, and FILE is the file (path+name) to save the
extracted sub-image.

For example, given the following kernel.its to build a kernel.itb:

  /dts-v1/;
  / {
      ...
      images {
        kernel@1 {
          description = "Kernel 2.6.32-34";
          data = /incbin/("/boot/vmlinuz-2.6.32-34-generic");
          type = "kernel";
          arch = "ppc";
          os = "linux";
          compression = "gzip";
          load = <00000000>;
          entry = <00000000>;
          hash@1 {
            algo = "md5";
          };
        };
        ...
      };
      ...
    };

The dumpimage can extract the 'kernel@1' node through the following command:

  $ ./dumpimage -T flat_dt -i kernel.itb -p 0 kernel
  Extracted:
   Image 0 (kernel@1)
    Description:  Kernel 2.6.32-34
    Created:      Wed Oct 22 15:50:26 2014
    Type:         Kernel Image
    Compression:  gzip compressed
    Data Size:    4040128 Bytes = 3945.44 kB = 3.85 MB
    Architecture: PowerPC
    OS:           Linux
    Load Address: 0x00000000
    Entry Point:  0x00000000
    Hash algo:    md5
    Hash value:   22352ad39bdc03e2e50f9cc28c1c3652

Which results in the file 'kernel' being exactly the same as '/boot/vmlinuz-2.6.32-34-generic'.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Guilherme Maciel Ferreira
067d156075 imagetool: make the image_save_datafile() available to all image types
Move the image_save_datafile() function from an U-Multi specific file
(default_image.c) to a file common to all image types (image.c). And rename it
to genimg_save_datafile(), to make clear it is useful for any image type.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Pieter Voorthuijsen
c72b65ccdf common: add cache flush to imxtract function
A cache flush is required when an image is extracted that is required on another core.

Signed-off-by: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive-technologies.com>
2015-01-29 13:38:39 -05:00
Sjoerd Simons
e86df6ef4f part: let list put the list in an environment variable
Add an optional third argument to the "part list" command which puts a
space seperated list of valid partitions into the given environment
variable. This is useful for allowing boot scripts to iterate of all
partitions of a device.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-01-29 13:36:54 -05:00
Sjoerd Simons
1a1ad8e090 fs: Add command to retrieve the filesystem type
New command to determine the filesystem type of a given partition.
Optionally stores the filesystem type in a environment variable.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-01-29 13:36:54 -05:00
Nikita Kiryanov
f82eb2fa5d common: convert compulab splash load code to common code
Move board/compulab/common/splash.c code to
common/splash_source.c to make it available for everybody. This move
renames cl_splash_screen_prepare() to splash_source_load(), and
the compilation of this code is conditional on CONFIG_SPLASH_SOURCE.

splash_source features:
* Provide a standardized way for declaring board specific splash screen
  locations
* Provide existing routines for auto loading the splash image from the
  locations as declared by the board
* Introduce the "splashsource" environment variable, which makes it
  possible to select the splash image source.

cm-t35 and cm-fx6 are updated to use the modified version.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:44:08 +01:00
Bo Shen
2af13d6b62 lcd: fix console address is not initialized
This commit 904672e (lcd: refactor lcd console stuff into its
own file), which cause lcd console address is not initialized.

This patch initialize the lcd console use the default value,
will be update when splash screen is enabled.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-01-28 16:58:02 -05:00
Stefan Roese
e860d012c4 spl: Change printf to puts for "Unsupported boot-device"
Microblaze currently doesn't use printf in SPL. So this one line was the only
reference to it and resulted in the printf functionality to be pulled in.
Exceeding the 4k size limit. Lets change the printf back to puts so that
Microblaze is fixed again. The only drawback is that the detected boot-device
number will not be printed. But this message alone should be helpful enough
to get an idea where the boot process is broken.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28 16:58:01 -05:00
Simon Glass
146251f87e Allow architecture-specific memory reservation
All memory to be reserved for use after relocation by adding a new call
to perform this reservation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-24 06:13:45 -07:00
Tom Rini
4608f37918 Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze 2015-01-22 09:48:22 -05:00
Michal Simek
1b63aaa587 fpga: Protect GZIP usage when LOADMK is enabled
For case where CMD_FPGA_LOADMK is enabled and GZIP disable.

Warning log:
common/built-in.o: In function `do_fpga':
/mnt/disk/u-boot/common/cmd_fpga.c:218: undefined reference to `gunzip'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-21 10:24:46 +01:00
Tom Rini
1cd2000698 Merge branch 'master' of git://git.denx.de/u-boot-mmc 2015-01-20 10:21:36 -05:00
Diego Santa Cruz
9e41a00b57 mmc: extend mmcinfo output to show partition write reliability settings
This extends the mmcinfo hardware partition info output to show
partitions with write reliability enabled with the "WRREL" string.
If the partition does not have write reliability enabled the "WRREL"
string is omitted; this is analogous to the ehhanced attribute.

Example output:

Device: OMAP SD/MMC
Manufacturer ID: fe
OEM: 14e
Name: MMC16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.41
High Capacity: Yes
Capacity: 13.8 GiB
Bus Width: 4-bit
Erase Group Size: 8 MiB
HC WP Group Size: 16 MiB
User Capacity: 13.8 GiB ENH WRREL
User Enhanced Start: 0 Bytes
User Enhanced Size: 512 MiB
Boot Capacity: 16 MiB ENH
RPMB Capacity: 128 KiB ENH
GP1 Capacity: 64 MiB ENH WRREL
GP2 Capacity: 64 MiB ENH WRREL

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:41:51 +02:00