Commit graph

3 commits

Author SHA1 Message Date
Patrick Delaunay
067a4c001d ARM: dts: stm32mp1: DDR config v1.44
Update DDR configuration with the latest update:

- PUBL_regs: DXnGCR[0]= according to ddr_width to disable Byte
                        lane 2/3 in 16bit
- fix LPDDR2/3 timing_calc to step RL/WL in relaxed
  timings mode
- remove  LPDDR3 RL3 (optional) support vs  MR0[7]
  because MR0[7] can't be read instead  always apply
  worse RL/WL for LPDDR3 when freq < 166MHz)
- change  MR3 to 48ohm drive  for LPDDR2/3
- change default ZPROG[7:4] = 0x1 for LPDDR2/3 ,
  '0' is not allowed even when ODT not used
- use DQSTRN for LPDDR2/3 (it was not set in PIR)
- LPDDR3: set dqsge/dwsgx gate extension to 2,2
  like LPDDR2
-DDRCTRL.dfitmg0:
  + for LPDDR3 tphy_wrlat = WL (as LPDDR2)
  + improvement for relaxed mode vs  RL/Wl at corner case.
    For example @533MHz RL/WL (relaxed) = 9/5 for LPDDR2/3
    and correction to MR2 accordingly
- DDR_PCFGQOS1_1: port1 timeout relaxed from 0x00 to 0x40,
  for LTDC.
- DDR_PCFGWQOS0_0: change vpr level from
  11 to 12 in order to include the CPU on
  the variable priority queue.
- DDR_SCHED: fix to consider 13 levels  (13 levels - 1 = 0xC)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Patrick Delaunay
c60fed14f6 stm32mp1: ram: change ddr speed to kHz
Allow fractional support in DDR tools.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Patrice Chotard
2366160eb2 ARM: dts: stm32: Synchronize DT with kernel one
This patch synchronizes U-boot DT with kernel one
This is based on https://patchwork.kernel.org/cover/10797115/

This patch adds initial support of STM32MP157 discovery boards:
  - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1).
    This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
    and 512MB of DDR3. Several connections are available on this boards:
    4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

  - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2).
    This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a)
    and Murata wifi/BT combo is added.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00