Commit graph

3278 commits

Author SHA1 Message Date
Simon Glass
f058f154a9 dm: Add CMD_DM and CMD_DEMO to Kconfig
Add Kconfig settings for these two options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:34 -07:00
Simon Glass
ca88b9b939 dm: i2c: Add a dm_ prefix to driver model bus speed functions
As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model
versions of these functions to avoid conflicts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-02-12 10:35:33 -07:00
Simon Glass
74d0186766 Introduce board_init_f_mem() to handle early memory layout
At present on some architectures we set up the following before calling
board_init_f():

   - global_data
   - stack
   - early malloc memory

Adding the code to support early malloc and global data setup to every
arch's assembler start-up is a pain. Also this code is not actually
architecture-specific. We can use common code for all architectures and
with a bit of care we can write this code in C.

Add a new function to deal with this. It should be called after memory
is available, with a pointer to the top of the area that should be used
before relocation. The function will set things up and return the lowest
memory address that it allocated/used. That can then be set as the top
of the stack.

Note that on some archs this function will use the stack, so the stack
pointer should be set to same value as is pased to board_init_f_mem().
A margin of 128 bytes will be left for this stack, so that it is not
overwritten. This means that 64 bytes is wasted by this early call.
This is not strictly necessary on several more modern archs, so we could
remove this at the cost of some arch-dependent code.

With this function there is no-longer any need for the assembler code to
zero global_data or set up the early malloc pointers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:29 -07:00
Hans de Goede
2c8571703a malloc_simple: Return NULL on malloc failure rather then calling panic()
All callers of malloc should already do error checking, and may even be able
to continue without the alloc succeeding.

Moreover, common/malloc_simple.c is the only user of .rodata.str1.1 in
common/built-in.o when building the SPL, triggering this gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303

Causing .rodata to grow with e.g. 0xc21 bytes, nullifying all benefits of
using malloc_simple in the first place.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:29 -07:00
Peter Tyser
b922a5f94d dm: Prevent "demo hello" and "demo status" segfaults
Segfaults can occur when a mandatory argument is not provided to
"demo hello" and "demo status".  Eg:

   => demo hello
   Segmentation fault (core dumped)

Add a check to ensure all required arguments are provided.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:29 -07:00
Tom Rini
db7a7dee68 Merge branch 'master' of git://git.denx.de/u-boot-x86 2015-02-10 10:42:56 -05:00
Tom Rini
c956662cc3 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2015-02-10 10:42:22 -05:00
Tom Rini
0dac731d19 Merge branch 'master' of git://git.denx.de/u-boot-video
Conflicts:
	include/splash.h

Signed-off-by: Tom Rini <trini@ti.com>
2015-02-10 10:41:54 -05:00
Tom Rini
307367eaff Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-02-10 10:40:43 -05:00
Nikita Kiryanov
7bf71d1f55 lcd: split splash code into its own function
lcd_logo() currently performs tasks well beyond just displaying the logo.
It has code which displays splash image, it has logic which determines
when the different display features are displayed, and it is coupled with
the lcd console because it holds the responsibility of returning the
lcd console base address.

Make lcd_logo() just about the logo by:
* Moving splash image display code into a dedicated function
* Moving the logic regarding when various features are displayed to
  lcd_clear() (which is arguably not the correct name for housing such
  code either, but it is currently the most fitting location code wise)
* Move the responsibility of setting the console base address to
  lcd_clear() too.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:31:58 +01:00
Nikita Kiryanov
033167c4c5 lcd: dt: extract simplefb support
We now have api functions that can support compiling simplefb code as its own
module. Since this code is not part of the display functionality, extract it
to its own file.

Raspberry Pi is updated to accommodate the changes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2015-02-10 13:31:26 +01:00
Nikita Kiryanov
bf21a5deb9 lcd: rename bitmap_plot to better represent its functionality
The name "bitmap_plot" is misleading because it implies that this is a generic
function capable of dealing with any bitmap, but its implementation only works
with the logo data.

Rename the function to better reflect this.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:30:49 +01:00
Nikita Kiryanov
c8d2febcc7 lcd: various cleanups
This cleanup mostly focuses on removing unnecessary whitespace and comments
which are superfluous and/or do not conform to the coding style.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:30:20 +01:00
Nikita Kiryanov
8ddfe2fad8 lcd: remove unused includes
Remove unused includes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:29:44 +01:00
Nikita Kiryanov
0b29a8969e lcd: introduce lcd_set_cmap
Reduce the lcd_display_bitmap #ifdef complexity by extracting Atmel-specific
code for setting cmap for bitmap images into a new function lcd_set_cmap().
A default version is implemented with the remainder of the code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:29:02 +01:00
Nikita Kiryanov
2306457c45 lcd: logo: move generic cmap setting to lcd_logo_set_cmap()
Get rid of platform-specific #ifdefs in bitmap_plot() by moving the generic
case of setting cmap into the weak lcd_logo_set_cmap().

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:28:30 +01:00
Nikita Kiryanov
0ee261f6d3 lcd: mpc823: move mpc823-specific lcd_logo_set_cmap code to mpc8xx_lcd.c
Reduce the bitmap_plot #ifdef complexity by extracting MPC823-specific code for
setting cmap into its own implementation of lcd_logo_set_cmap(), implemented in
mpc8xx_lcd.c. In the MPC823 implementation, ARRAY_SIZE(bmp_logo_palette) is
switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which
would cause a compilation error because the logo data and palette arrays would
be defined twice.

This is a step towards cleaning bitmap_plot() of platform-specific code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:27:58 +01:00
Nikita Kiryanov
a02e948139 lcd: atmel: introduce lcd_logo_set_cmap
Reduce the bitmap_plot #ifdef complexity by extracting Atmel-specific code for
setting cmap into a new function lcd_logo_set_cmap(), which is implemented in
atmel_lcdfb driver and defined as part of common/lcd.c api with a weak dummy
version. In the Atmel implementation, ARRAY_SIZE(bmp_logo_palette) is
switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which
would cause a compilation error because the logo data and palette arrays would
be defined twice.

This is a step towards cleaning bitmap_plot() of platform-specific code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:27:28 +01:00
Nikita Kiryanov
27fad01b7f lcd: mpc8xx: move mpc823-specific fb_put_byte to mpc8xx_lcd.c
Reduce the amount of platform-specific code in common/lcd.c by moving MPC823
implementation of fb_put_byte() to mpc8xx_lcd.c. Since we must also have a
default implementation for everybody else, make the remainder of the code
into a weak function.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:26:53 +01:00
Nikita Kiryanov
b3d12e9bca lcd: atmel: move atmel-specific fb_put_word to atmel_lcdfb
Reduce the amount of platform-specific code in common/lcd.c by moving Atmel
implementation of fb_put_word() to atmel_lcdfb.c. Since we must also have a
default implementation for everybody else, make the remainder of the code
into a weak function.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:25:56 +01:00
Nikita Kiryanov
38b550877f lcd: split configuration_get_cmap
configuration_get_cmap() is multiple platform-specific functions stuffed into
one function. Split it into multiple versions, and move each version to the
appropriate driver to reduce the #ifdef complexity.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:25:08 +01:00
Michal Simek
de86765bc4 bdinfo: Show information about fdt blob via bdinfo
Microblaze target supports both OF and !OF cases
and from log is not clear which version is running.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:05 +01:00
Michal Simek
e945f6dc28 microblaze: Move architecture to use generic board init
Compile code with -fPIC to get GOT. Do not build SPL
with fPIC because it increasing SPL size for nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:11:56 +01:00
Andreas Bießmann
61d7b1bb5f common/board_r: manual relocation for cmd table
This is required for architectures still need manual relocation like avr32, mk68
and others.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:09:42 +01:00
Heiko Schocher
2b8b38eaca common/board_f: add at91 wdt
call hw_watchdog_init() also if CONFIG_AT91SAM9_WATCHDOG
is used.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-07 23:43:18 +01:00
Simon Glass
abbdb26257 scsi: bootstage: Measure time taken to scan the bus
On some hardware this time can be significant. Add bootstage support for
measuring this. The result can be obtained using 'bootstage report' or
passed on to the Linux via the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-06 12:07:38 -07:00
Tom Rini
8e3da9dd11 Merge branch 'master' of git://git.denx.de/u-boot-dm 2015-01-30 09:24:42 -05:00
Michal Simek
2d73f0d6cd fpga: Extend dump description
There are missing parameters in help which fpga dump command
requires.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-30 09:19:17 -05:00
Bin Meng
89fc8bbf44 cmd: Fix gettime command help
Remove the additional ',' and '\n' from the gettime command help.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-30 09:19:16 -05:00
Ruchika Gupta
b37b46f042 rsa: Use checksum algorithms from struct hash_algo
Currently the hash functions used in RSA are called directly from the sha1
and sha256 libraries. Change the RSA checksum library to use the progressive
hash API's registered with struct hash_algo. This will allow the checksum
library to use the hardware accelerated progressive hash API's once available.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Fixed build error in am335x_boneblack_vboot due to duplicate CONFIG_DM)

Change-Id: Ic44279432f88d4e8594c6e94feb1cfcae2443a54
2015-01-29 17:09:59 -07:00
Ruchika Gupta
2dd9002719 Use hash.c in mkimage
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:59 -07:00
Ruchika Gupta
46fe2c0444 hash: Add function to find hash_algo struct with progressive hash
The hash_algo structure has some implementations in which progressive hash
API's are not defined. These are basically the hardware based implementations
of SHA. An API is added to find the algo which has progressive hash API's
defined. This can then be integrated with RSA checksum library which uses
Progressive Hash API's.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:59 -07:00
Martin Dorwig
49cad54788 Export redesign
this is an atempt to make the export of functions typesafe.
I replaced the jumptable void ** by a struct (jt_funcs) with function pointers.
The EXPORT_FUNC macro now has 3 fixed parameters and one
variadic parameter
The first is the name of the exported function,
the rest of the parameters are used to format a functionpointer
in the jumptable,

the EXPORT_FUNC macros are expanded three times,
1. to declare the members of the struct
2. to initialize the structmember pointers
3. to call the functions in stubs.c

Signed-off-by: Martin Dorwig <dorwig@tetronik.com>
Acked-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
(resending to the list since my tweaks are not quite trivial)
2015-01-29 17:09:57 -07:00
Simon Glass
25ab4b0303 dm: i2c: Provide an offset length parameter where needed
Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-01-29 17:09:53 -07:00
Simon Glass
f9a4c2da72 dm: i2c: Rename driver model I2C functions to permit compatibility
Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
a02af4aeec dm: demo: Add a simple GPIO demonstration
Add a new 'demo light' command which uses GPIOs to control imaginary lights.
Each light is assigned a bit number in the overall value. This provides an
example driver for using the new GPIO API.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Masahiro Yamada
0365ffcc0b generic-board: show model name in board_init_f() too
The common/board_r.c has show_model_r() to display the model name
if the DTB has a "model" property.  It sounds useful to have a similar
function in common/board_f.c too because most of the boards show
their board name before relocation.

Instead of implementing the same function in both common/board_f.c
and common/board_r.c, let's split it up into common/show_board_info.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:49 -07:00
Masahiro Yamada
5468461d1e cmd_i2c: change variable type for 10bit addressing support
To store 10bit chip address, the variable type should not be uchar,
but uint.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher<hs@denx.de>
2015-01-29 17:09:49 -07:00
Michal Simek
e3046ba4da common: bootm: Document fake bootm sub-command
Fake option is enabled only when CONFIG_TRACE is
enabled in common/bootm.c:do_boot_states().

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-29 13:38:42 -05:00
Guilherme Maciel Ferreira
39931f966a dumpimage: fit: extract FIT images
The dumpimage is able to extract components contained in a FIT image:

  $ ./dumpimage -T flat_dt -i CONTAINER.ITB -p INDEX FILE

The CONTAINER.ITB is a regular FIT container file. The INDEX is the poisition
of the sub-image to be retrieved, and FILE is the file (path+name) to save the
extracted sub-image.

For example, given the following kernel.its to build a kernel.itb:

  /dts-v1/;
  / {
      ...
      images {
        kernel@1 {
          description = "Kernel 2.6.32-34";
          data = /incbin/("/boot/vmlinuz-2.6.32-34-generic");
          type = "kernel";
          arch = "ppc";
          os = "linux";
          compression = "gzip";
          load = <00000000>;
          entry = <00000000>;
          hash@1 {
            algo = "md5";
          };
        };
        ...
      };
      ...
    };

The dumpimage can extract the 'kernel@1' node through the following command:

  $ ./dumpimage -T flat_dt -i kernel.itb -p 0 kernel
  Extracted:
   Image 0 (kernel@1)
    Description:  Kernel 2.6.32-34
    Created:      Wed Oct 22 15:50:26 2014
    Type:         Kernel Image
    Compression:  gzip compressed
    Data Size:    4040128 Bytes = 3945.44 kB = 3.85 MB
    Architecture: PowerPC
    OS:           Linux
    Load Address: 0x00000000
    Entry Point:  0x00000000
    Hash algo:    md5
    Hash value:   22352ad39bdc03e2e50f9cc28c1c3652

Which results in the file 'kernel' being exactly the same as '/boot/vmlinuz-2.6.32-34-generic'.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Guilherme Maciel Ferreira
067d156075 imagetool: make the image_save_datafile() available to all image types
Move the image_save_datafile() function from an U-Multi specific file
(default_image.c) to a file common to all image types (image.c). And rename it
to genimg_save_datafile(), to make clear it is useful for any image type.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Pieter Voorthuijsen
c72b65ccdf common: add cache flush to imxtract function
A cache flush is required when an image is extracted that is required on another core.

Signed-off-by: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive-technologies.com>
2015-01-29 13:38:39 -05:00
Sjoerd Simons
e86df6ef4f part: let list put the list in an environment variable
Add an optional third argument to the "part list" command which puts a
space seperated list of valid partitions into the given environment
variable. This is useful for allowing boot scripts to iterate of all
partitions of a device.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-01-29 13:36:54 -05:00
Sjoerd Simons
1a1ad8e090 fs: Add command to retrieve the filesystem type
New command to determine the filesystem type of a given partition.
Optionally stores the filesystem type in a environment variable.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2015-01-29 13:36:54 -05:00
Nikita Kiryanov
f82eb2fa5d common: convert compulab splash load code to common code
Move board/compulab/common/splash.c code to
common/splash_source.c to make it available for everybody. This move
renames cl_splash_screen_prepare() to splash_source_load(), and
the compilation of this code is conditional on CONFIG_SPLASH_SOURCE.

splash_source features:
* Provide a standardized way for declaring board specific splash screen
  locations
* Provide existing routines for auto loading the splash image from the
  locations as declared by the board
* Introduce the "splashsource" environment variable, which makes it
  possible to select the splash image source.

cm-t35 and cm-fx6 are updated to use the modified version.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:44:08 +01:00
Bo Shen
2af13d6b62 lcd: fix console address is not initialized
This commit 904672e (lcd: refactor lcd console stuff into its
own file), which cause lcd console address is not initialized.

This patch initialize the lcd console use the default value,
will be update when splash screen is enabled.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-01-28 16:58:02 -05:00
Stefan Roese
e860d012c4 spl: Change printf to puts for "Unsupported boot-device"
Microblaze currently doesn't use printf in SPL. So this one line was the only
reference to it and resulted in the printf functionality to be pulled in.
Exceeding the 4k size limit. Lets change the printf back to puts so that
Microblaze is fixed again. The only drawback is that the detected boot-device
number will not be printed. But this message alone should be helpful enough
to get an idea where the boot process is broken.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28 16:58:01 -05:00
Simon Glass
146251f87e Allow architecture-specific memory reservation
All memory to be reserved for use after relocation by adding a new call
to perform this reservation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-24 06:13:45 -07:00
Tom Rini
4608f37918 Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze 2015-01-22 09:48:22 -05:00
Michal Simek
1b63aaa587 fpga: Protect GZIP usage when LOADMK is enabled
For case where CMD_FPGA_LOADMK is enabled and GZIP disable.

Warning log:
common/built-in.o: In function `do_fpga':
/mnt/disk/u-boot/common/cmd_fpga.c:218: undefined reference to `gunzip'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-21 10:24:46 +01:00