The temperature unit is millidegree Celsius, so divide by 1000 to correctly
print the temperature values in Celsius.
While at it, also change a typo: "has beyond" to "is beyond".
Signed-off-by: Fabio Estevam <festevam@denx.de>
dev_info() message is not printed by default. Increase the log level
to dev_crit(). This allows the critical messages related to the temperature
getting beyong the alert threshold to be displayed.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
When the 'polling-delay' property is not passed via devicetree,
pdata->polling_delay keeps at 0. This causes the imx_tmu driver to get
stuck inside the busy while() loop when the CPU temperature is above
the alert point.
Fix this problem by passing a one second polling interval, which provides
a proper delay to let the system to cool down and exit the while() loop
when the temperature is below the alert point.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Select the i.MX8MM thermal driver as it is useful for displaying
the CPU temperature and its grading:
CPU: Commercial temperature grade (0C to 95C) at 38C
It also prevents booting when the temperature is above the alert
point.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.
Signed-off-by: Marek Vasut <marex@denx.de>
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.
Signed-off-by: Marek Vasut <marex@denx.de>
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.
Signed-off-by: Marek Vasut <marex@denx.de>
If dram_init_banksize() is called from SPL, the rom_pointer, at that
point, is not correctly initialized. This causes wrong calculation of
DRAM start and size in dram_init_banksize(). The issue became apparent
only in Falcon Mode. Added an extra condition to prevent using
rom_pointer in SPL.
Signed-off-by: Elena Popa <elena.popa@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
U-Boot splits DRAM bank spanning addresses below and above the 32bit
boundary into two DRAM banks. Since this platform may come with 4GiB
of DRAM, increase the DRAM bank count to 2.
Signed-off-by: Marek Vasut <marex@denx.de>
This board certainly does use default 'run distro_bootcmd' boot command,
make sure this is set in 'bootcmd' variable.
Fixes: 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
* Man-page for gpt command
* Fix long text help of gpt command
* Add events to HTML documentation
* Update Toradex documentation
-----BEGIN PGP SIGNATURE-----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=RoWP
-----END PGP SIGNATURE-----
Merge tag 'doc-2023-10-rc4-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2023-10-rc4-2
* Man-page for gpt command
* Fix long text help of gpt command
* Add events to HTML documentation
* Update Toradex documentation
This help text appears to be a fragment of the text shown when
CONFIG_CMD_GPT_RENAME is enabled, but is confusing so remove it.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to
GPL-2.0-or-later.
- Add links to product websites of SoM and carrier board where missing.
- Add information about update U-Boot wrapper where missing.
- Add sectionauthor where missing.
- Update information about imx-seco from version 3.7.4 to 3.8.1.
- Various minor grammatic and spelling fixes.
- Improve whitespace by adding or removing new lines.
- Change from code-block for output to just Output::.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add the events.h include to the API documentation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Provide Sphinx documentation for all events.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
- A few platform-specific config/dts updates to fix issues, drop a
temporary change in binman, update the MAINTAINERS file to remove
Wolfgang Denk, fix a typo, fix a corner case with bootstd, update
Azure to not timeout so easily, and fix a case where we would omit
some files in SPL.
This reverts commit c5b68ef8af.
CONFIG_OPTEE_TZDRAM_SIZE is used by imx6-based SoCs as well. Move the
option back.
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
The affected boards have been fixed, so drop this hack.
This reverts commit 288ae53cb7.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Adding a phandle to a template node is not allowed, since when the node is
instantiated multiple times, we end up with duplicate phandles.
Drop this invalid constructs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
If one of SHA* algorithms is disabled in u-boot, its code is not
included in SPL even if a given SHA* option is enabled in SPL. Fix
this.
Fixes: 603d15a572 ("spl: cypto: Bring back SPL_ versions of SHA")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
As per current Azure Pipelines documentation we qualify for 3600 minutes
per job, if specified, as the timeout. The default unspecified timeout
is 60 minutes. Rework things to specify 0 as the timeout (and so maximum
allowed) so that we don't have failures due to running slightly past 60
minutes total.
Link: https://learn.microsoft.com/en-us/azure/devops/pipelines/process/phases?view=azure-devops&tabs=yaml#timeouts
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Similar to MT7981 and MT7986 also MT7988 can have a high number of
reserved-memory regions used by the various hardware offloading
subsystems.
Raise CONFIG_LMB_MAX_REGIONS to 64 to avoid errors when trying to boot
Linux with more then 6 reserved regions:
ERROR: reserving fdt memory region failed (addr=4f700000 size=240000 flags=4)
ERROR: reserving fdt memory region failed (addr=15194000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15294000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15394000 size=1000 flags=4)
ERROR: Failed to allocate 0xb161 bytes below 0x80000000.
device tree - allocation error
Fixes: bc4adc97cf ("board: mediatek: add MT7988 reference boards")
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This should have already been enabled but was missed when converting the
base platform defconfig, fix this here.
Fixes: 3c5aa6cacc ("configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The existing distro scripts check extlinux and scripts before EFI. Adjust
the default ordering to do the same, to avoid breaking existing flows.
Add some documentation, mentioning that this order will likely change in
future.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Da Xue <da@libre.computer>
Ethernet on Bananapi-r3 is broken after
commit bd70f3cea3 ("net: mediatek: add support for SGMII 1Gbps auto-negotiation mode")
because changes from this commit were not applied to bpi-r3 devicetree too:
commit aef54ea16c ("arm: dts: medaitek: convert gmac link mode to 2500base-x")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
The Kconfig references a readme file that's moved and
converted to rst so update the reference.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Documentation:
* describe TPL/VPL/SPL boot
* Add support for sphinx-prompt and convert TI K3 to use it
* board: sdm845: Explicitly add boot.img flashing command
EFI:
* remove handle from events when deleting it
Others:
* fix gpt sub-commands setenv and enumerate
* add a parameter check in hash_calculate()
-----BEGIN PGP SIGNATURE-----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=owiu
-----END PGP SIGNATURE-----
Merge tag 'efi-2023-10-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-10-rc4
Documentation:
* describe TPL/VPL/SPL boot
* Add support for sphinx-prompt and convert TI K3 to use it
* board: sdm845: Explicitly add boot.img flashing command
EFI:
* remove handle from events when deleting it
Others:
* fix gpt sub-commands setenv and enumerate
* add a parameter check in hash_calculate()
When a notification event is registered for a protocol the handle of the
protocol is added in our event notification list. When all the protocols
of the handle are uninstalled we delete the handle but we do not remove
it from the event notification list.
Clean up the protocol removal functions and add a wrapper which
- Removes the to-be deleted handle from any lists it participates
- Remove the handle if no more protocols are present
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This is a stub describing how TPL, VPL, and SPL load the next boot stages
on a detail level for users.
For sure we will need a few patches on top to catch the whole complexity.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Sphinx-prompt provides a handy scheme to provide documentation that
renders nicely and yet provides a scheme to copy paste for users without
having to hand-edit the copied text as is the result of code-block
[1] https://lore.kernel.org/all/87fs48rgto.fsf@baylibre.com/
Reported-by: Simon Glass <sjg@chromium.org>
Suggested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Sphinx-prompt[1] helps bring-in '.. prompt::' option that allows a
better rendered documentation, yet be able to copy paste without
picking up the prompt from rendered documentation.
[1] https://lore.kernel.org/all/87fs48rgto.fsf@baylibre.com/
Suggested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Use code-block. Fix length of two heading underlines.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
In commands like 'ls mmc 0:f' the partition number is hexadecimal.
In command 'gpt setenv' variable gpt_partition_entry needs to be set
to a hexadecimal value to allow its use as a parameter in a
subsequent command.
Fixes: 57f8cf1b9aea ("cmd: fix gpt enumerate")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Do not assume that partitions are numbered continuously starting at 1.
Only a single partition table type can exist on a block device. If we found
a GPT partition table, we must not re-enumerate with the MBR partition
driver which would find the protective partition.
Fixes: 12fc1f3bb2 ("cmd: gpt: add eMMC and GPT support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Do not assume that partitions are continuously numbered starting at 1.
Having a partition table with a single partition 63 is valid.
Fixes: 12fc1f3bb2 ("cmd: gpt: add eMMC and GPT support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
If hash_calculate is invoked with region_count = 0, it will try to hash
INT_MAX regions. We should check this parameter.
* Avoid a comparison with different signedness.
* Check that region_count is at least 1.
* Avoid a superfluous assignment.
Fixes: b37b46f042 ("rsa: Use checksum algorithms from struct hash_algo")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
CFG_STM32MP1_SCMI_SHM_SYSRAM will be disabled by default for STM32MP13x
SoCs in next OP-TEE version and the OP-TEE SMCI server uses the OP-TEE
native shared memory registered by clients.
To be compatible by default with this configuration this patch removes
the shared memory in the SCMI configuration and the associated reserved
memory in SRAM.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Since OP-TEE commit 89ba3422ee80 ("plat-stm32mp1: scmi_server: default
use OP-TEE shared memory"), integrated in OP-TEE 3.22.0-rc1
the default configuration for STM32MP15x SoCs changes,
CFG_STM32MP1_SCMI_SHM_SYSRAM is disabled by default and the OP-TEE SMCI
server uses ithe OP-TEE native shared memory registered by clients.
To be compatible by default with this configuration and the next OP-TEE
version, this patch removes the SHMEM in the SCMI configuration and the
associated reserved memory in the last 4KByte page of SRAM,
in the STM32MP15 device tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
use CONFIG_IS_ENABLED for clock enable/disable and change printf's
to dev_err. Additionlly remove the comment that does not make sense.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Add support for enabling and disabling vbus-supply regulator found
on several imx8mp boards in the usb3_phy0 and usb3_phy1 nodes.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
As ulpi_reset gpio is now optional, we need to check it when doing
the 'dwc3_generic_remove' function. Check if it is declared before
accessing the ulpi_reset.
Fixes: 237d1f60b1 ("usb: dwc3: Use the devm_gpiod_get_optional()
API for reset gpio")
Reported-by: Thomas Nizan <tnizan@witekio.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Documentation:
* Fix documentation for TI boards
* Describe running on VirtualBox
* List build dependencies for building documenation
* Add references to U-Boot talks
Other:
* Fix error handling in the setexpr command (printf_str)
-----BEGIN PGP SIGNATURE-----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=E6SF
-----END PGP SIGNATURE-----
Merge tag 'doc-2023-10-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for doc-2023-10-rc4
Documentation:
* Fix documentation for TI boards
* Describe running on VirtualBox
* List build dependencies for building documenation
* Add references to U-Boot talks
Other:
* Fix error handling in the setexpr command (printf_str)
The list of u-boot talks on elinux.org is quite long, so let's highlight
the talks which are likely most relevant for newcomers.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
