Commit graph

1290 commits

Author SHA1 Message Date
Yu Chien Peter Lin
093ff96e74 doc: arch: Add document for RISC-V architecture
This patch adds a brief introduction to the RISC-V architecture and
the typical boot process used on a variety of RISC-V platforms.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-02-19 21:15:15 +01:00
Ryan Chen
4088f5fce8 i2c:aspeed:support ast2600 i2c new register mode driver
Add i2c new register mode driver to support AST2600 i2c
new register mode. AST2600 i2c controller have legacy and
new register mode. The new register mode have global register
support 4 base clock for scl clock selection, and new clock
divider mode.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2023-02-13 09:57:49 +01:00
Linus Walleij
41a29f284c cmd: Add a SEAMA image load command
Add a command to load SEAMA (Seattle Image), a NAND flash
on-flash storage format.

This type of flash image is found in some D-Link routers such
as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and
DCH-M225, as well as in WD and NEC routers on the ath79
(MIPS), Broadcom BCM53xx, and RAMIPS platforms.

This U-Boot command will read and decode a SEAMA image from
raw NAND flash on any platform. As it is always using big endian
format for the data decoding is always necessary on platforms
such as ARM.

The command is needed to read a SEAMA-encoded boot image on the
D-Link DIR-890L router for boot from NAND flash in an upcoming
port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx)
architecture.

A basic test and documentation is added as well. The test must
be run on a target with NAND flash support and at least one
resident SEAMA image in flash.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-06 17:10:15 -05:00
Angelo Dureghello
94a51af409 MAINTAINERS: m68k: Change Angelo's email address
Set my new current personal email.

Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-02-06 17:10:15 -05:00
Nikhil M Jain
5f9f816bb8 drivers: video: tidss: TIDSS video driver support for AM62x
Added tidss video driver support which enables display
on oldi panel using AM62x, it creates a simple pipeline
framebuffer==>vidl1==>ovr1==>vp1==>oldi_panel and
calculates clock rates for panel from panel node in
device tree.

To compile TIDSS when user sets CONFIG_VIDEO_TIDSS
add rule in Makefile. Include tidss folder location
in Kconfig.

TIDSS is ported from linux kernel version 5.10.145

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-02-04 18:16:30 +01:00
Tom Rini
095d909cf1 - jethub j100: add rescue boot from microSD
- move meson sm command to cmd/meson and add efusedump sub-command
 - switch dwc2 otg to DM for G12A, GXL & AXG
 - Add new boards:
  - Odroid Go Ultra
  - Odroid-N2L
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmPY1OsACgkQd9zb2sjI
 SdEo4w//WU0siViTHkco8GH7eZDrRKbsxgMZpmjih2gblDKfxmMPYFFtciXPH3wg
 isBu+qfLFtTIg5oEvwS42G4RzNQPV8HDcpc7Md/3n3GtxF1l/dCo0nvfIi9PsuLB
 x1GYAJ5yphgOC85DB55Gnq7sj7L2/7z6dd/HFGO691+3Bcbq8RH6DDZ0MNZpiiUK
 Ns43u+A6Ydc2/fpX9U7X2wf7CoEk77qWmiN2N1egVIeRsBallPxs/DPNLI2q7AGZ
 OGY+M3lVynRlNJULdgljqvVm1/KjlsVGHRwDAFD7Gl6HhGymxhXJJuNTh+le4ruw
 f5KLpUI9mEEmST6NfKqj+8Ozd3q8c1EHD0baKupIeTaherWi/sD9DpnMli4efrUj
 CkrBPqgxScxauuYAbMjRmKJgICRzNMJAsKX57q8s0TjhWyAfoTKIPWHUpSjAeDRE
 1pWblV0WZWFErMmdHllINFtFYl+XBCi/1qp2t8AYA06DPnBrY2s/eY9pxih0G7nB
 tzNkqWTwMAJ7PYOzDA7mv80n2Q2zjqJV55dzjRRehA3XSuP920qFVMVShSYv28O6
 fh8t84rdqfvFMSnQy6zHaxGEJIwaH9C6aFM8MGak2WLI1EYLIxVi79qf+T3iMbdj
 gkKvt5m4kF7Ul8nB/7Az7nNH1JdHgVRXLIzo+lam4AdYccONvVI=
 =cmt7
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20230131' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- jethub j100: add rescue boot from microSD
- move meson sm command to cmd/meson and add efusedump sub-command
- switch dwc2 otg to DM for G12A, GXL & AXG
- Add new boards:
 - Odroid Go Ultra
 - Odroid-N2L
2023-01-31 10:15:39 -05:00
Mark Kettenis
bdebb00d83 pci: Add Apple PCIe controller driver
This driver supports the PCIe controller on the Apple M1 and
M2 SoCs.  The code is adapted from the Linux driver.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-27 14:47:58 -05:00
John Keeping
69c82fa2ea MAINTAINERS: add include/power/ to POWER
Add the related include files to the power MAINTAINERS entry.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 12:51:26 -05:00
Ilias Apalodimas
8aedcaf991 MAINTAINERS: add a new entry on TEE MAINTAINERS
Since I do have a look on TEE patches regardless and Jens doesn't have
his own tree, add myself as a co-maintainer.  I'll be carrying over the
TEE related patches from now on.  While at it add the maintenance tree
for TPM

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-01-20 10:04:56 +02:00
Sean Anderson
46b2e5e92c reboot-mode: Add NVMEM reboot mode
This adds an NVMEM reboot mode driver, similar to Linux's
implementation. This allows using the same device tree binding for Linux
and U-Boot in most cases.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-11 11:54:50 -05:00
Alexey Romanov
311106a1c6 arm/mach-meson: move smc commands in cmd/meson
It is incorrect to keep commands in the arch/ folder.

Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230110105650.54580-3-avromanov@sberdevices.ru
[narmstrong: moved after cmd/sound in index.rst]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-10 15:27:17 +01:00
Tom Rini
b82f12b642 First set of u-boot-at91 features for the 2023.04 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmO2mnEcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyBAOB/4y7e9y0jdKSWDwMdZj
 enXK/U/GREFyuiSdadil0aJl9WfayjwZkh7uHSTj4pi9ApNivfoqsL7WZYpJxhRD
 WlpNhs3TZ70i8CgKUosdzcpquAQZUZhg6iV5DCObrK6yNJRGOXLIwMOd+vw/Xz6/
 YTGqzivEDMBuH/9HLuC0m+26PEpff8nenNEjC2k8ssG26ojLz7oCQh2HoHcSgNRc
 HkEYlFJ/Le8kM8Ak2F3ebmsfgMTnFrRVwV1BsZa5vO0BrMYgJCORsl7Cnfcw6/2N
 LEHG7kwlSorJeETn/gkLiZ+NyqzU+oFH0jGRZ5Ciqg1qcCO3k9yBMgWQzd7nTL6C
 5oZA
 =Ocdd
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2023.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2023.04 cycle:

This feature set includes the new DM-based NAND flash driver (old non-DM
driver is still kept for backwards compatibility), and the move to DM
NAND flash driver for sam9x60ek board. Feature set also includes
devicetree alignment for sama7g5 with Linux, devicetree alignment on USB
with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor
configs and tweaks.
2023-01-06 11:53:26 -05:00
Stefan Bosch
5ec6cbcc7f arm: s5p4418: dm_serial: add driver source code
Add dm_serial driver source code for S5P4418 SOC. Extend the "arm,pl011"
driver by init of UART-clock and UART-reset.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2023-01-02 16:06:08 -05:00
Balamanikandan Gunasundar
68ddf18dc3 memory: atmel-ebi: add Atmel EBI (External Bus Interface) driver
The EBI is used to access peripherals like NAND, SRAM, NOR etc. Add
this driver to probe the nand flash controller. This is a dummy driver
and not yet a complete device driver for EBI.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2022-12-08 18:06:27 +02:00
Gabriel Fernandez
01c8b664d2 dt-bindings: stm32mp13: add clock & reset support for STM32MP13
Add support of stm32mp13 DT bindings of clock and reset.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07 16:49:35 +01:00
Paul Barker
c9311b5a90 MAINTAINERS: Adopt SanCloud boards
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Cc: Marc Murphy <marc.murphy@sancloud.com>
2022-12-02 08:39:00 -05:00
Marek Vasut
9f52e765dc MAINTAINERS: Move usb_storage from DFU to USB
The usb_storage.c is the host-side USB mass storage device support,
it is not the DFU/UMS gadget-side implementation. Fix the entry.

Signed-off-by: Marek Vasut <marex@denx.de>
2022-12-02 08:39:00 -05:00
Matthias Brugger
58880b5208 MAINTAINERS: add RaspberryPi co-maintainer
Peter accpeted to step up as a co-maintainer for the RPis.
Reflect that in the corresponding MAINTAINERS files.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
2022-12-02 08:39:00 -05:00
Michal Simek
64fc7fc887 soc: xilinx: versal-net: Add soc_xilinx_versal_net driver
Add soc_xilinx_versal_net driver to identify the family & revision of
versal-net SoC. Add Kconfig option CONFIG_SOC_XILINX_VERSAL_NET to
enable/disable this driver. To enable this driver by default, add this
config to xilinx_versal_net_virt_defconfig file. This driver will be
probed using platdata U_BOOT_DEVICE structure which is specified in
mach-versal-net/cpu.c.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/613d6bcffd9070f62cf348079ed16c120f8fc56f.1668612993.git.michal.simek@amd.com
2022-11-22 15:02:07 +01:00
Heinrich Schuchardt
00ec77f2b0 MAINTAINERS: add UEFI commands to EFI PAYLOAD
Add the following files to EFI PAYLOAD:

- cmd/bootefi.c
- cmd/efidebug.c
- cmd/eficonfig.c
- cmd/nvedit_efi.c

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-16 08:34:06 +01:00
Martyn Welch
c8f3402ad2 arm: imx8mp: Initial MSC SM2S iMX8MP support
Add support for the MSC SM2S-IMX8PLUS SMARC Module. Tested in conjunction
with the MSC SM2-MB-EP1 Mini-ITX Carrier Board.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-11-08 17:34:47 +01:00
Heinrich Schuchardt
607566d010 MAINTAINERS: add arch/arm/lib/*_efi.* to EFI_PAYLOAD
The files arch/arm/lib/*_efi.* are only relevant for the UEFI sub-system.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-06 10:50:04 +01:00
William Zhang
35751c7f3f timer: sti: convert sti-timer to arm a9 global timer
STI timer is actually ARM Cortex A9 global timer. Convert the driver to
use generic global timer name and make it consistent with Linux kernel
global timer driver. This also allows any A9 based device to use this
driver.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-10-31 08:55:59 -04:00
William Zhang
62c0ae40bb arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:59 -04:00
William Zhang
b0e2b6abac arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other broadband
SoC, this patch adds it under CONFIG_BCM6858 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and the
original dts is updated with the one from linux next git repository.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:51 -04:00
William Zhang
dc244ca33a arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other Broadband
SoC, this patch adds it under CONFIG_BCM6856 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and Broadcom uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:41 -04:00
William Zhang
b23c804025 MAINTAINERS: Add BCM63158 maintainer to BCMBCA entry
Since ARCH_BCM63158 SoC support is merged into ARCH_BCMBCA, add BCM63158
maintainer Philippe to bcmbca maintainer list.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:55:41 -04:00
William Zhang
61546e7cda arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCA
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
Broadband SoC, this patch adds it under CONFIG_BCM63158 chip
config and CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:54:44 -04:00
William Zhang
e5703df262 arm: bcmbca: add bcm4908 SoC support
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added
under ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux git repository so the dts and dtsi
files are stripped down version of linux copies with mininum blocks
needed by u-boot.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:44 -04:00
William Zhang
1b81843bac arm: bcmbca: add bcm6813 SoC support
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part
of the BCA (Broadband Carrier Access origin) chipset family so it's
added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:43 -04:00
William Zhang
dc6117dcb3 arm: bcmbca: add bcm4912 SoC support
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts
and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:43 -04:00
William Zhang
c6e0073c05 arm: bcmbca: add bcm63146 SoC support
BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31 08:54:43 -04:00
William Zhang
21385adf2c arm: bcmbca: add bcm63138 SoC support
BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory, ARM A9 global timer
and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are stripped down version of linux copies with mininum blocks
needed by u-boot.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

This patch applies on top of the my previous patch [1].

[1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31 08:54:43 -04:00
William Zhang
7e3d69592b arm: bcmbca: add bcm63148 SoC support
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
4054fd7182 arm: bcmbca: add bcm6756 SoC support
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC.
It is part of the BCA(Broadband Carrier Access origin) chipset family so
it's added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
4cab03842c arm: bcmbca: add bcm6878 SoC support
BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011
uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
adb34dd542 arm: bcmbca: add bcm6846 SoC support
BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:43 -04:00
William Zhang
41c65ce44c arm: bcmbca: add bcm63178 SoC support
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31 08:54:42 -04:00
Simon Glass
b0c5353c7c video: Drop common LCD implementation
This code is no-longer used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 20:07:17 +01:00
Roger Knecht
23c0df6e7c cmd: xxd: add new command
Add xxd command to print file content as hexdump to standard out

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Roger Knecht <rknecht@pm.me>
2022-10-11 15:40:48 -04:00
Roger Knecht
690a1d6948 cmd: cat: add new command
Add cat command to print file content to standard out

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Roger Knecht <rknecht@pm.me>
2022-10-11 15:40:48 -04:00
Tom Rini
300077cf8c Xilinx changes for v2023.01-rc1 (round 3)
fpga:
 - Create new uclass
 - Get rid of FPGA_DEBUG and use logging infrastructure
 
 zynq:
 - Enable early EEPROM decoding
 - Some DT updates
 
 zynqmp:
 - Use OCM_BANK_0 to check config loading permission
 - Change config object loading in SPL
 - Some DT updates
 
 net:
 - emaclite: Enable driver for RISC-V
 
 xilinx:
 - Fix static checker warnings
 - Fix GCC12 warning
 
 sdhci:
 - Read PD id from DT
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCY0UbQQAKCRDKSWXLKUoM
 IUA9AJ9EisuI90j8ziE5aDYCy/1MlESW4ACcDlsi7o6lYDx/wjniS2rwfztn5xE=
 =zjZe
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.01-rc1-v3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2023.01-rc1 (round 3)

fpga:
- Create new uclass
- Get rid of FPGA_DEBUG and use logging infrastructure

zynq:
- Enable early EEPROM decoding
- Some DT updates

zynqmp:
- Use OCM_BANK_0 to check config loading permission
- Change config object loading in SPL
- Some DT updates

net:
- emaclite: Enable driver for RISC-V

xilinx:
- Fix static checker warnings
- Fix GCC12 warning

sdhci:
- Read PD id from DT
2022-10-11 09:57:08 -04:00
Ilias Apalodimas
1af680d5bc MAINTAINERS: get rid of the optee variables entry
Since I am co-maintaining EFI with Heinrich remove the special
entry for EFI variable storage via OP-TEE

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-10-06 22:54:58 +02:00
Alexander Dahl
1323d08bdf dm: fpga: Introduce new uclass
For future DM based FPGA drivers and for now to have a meaningful
logging class for old FPGA drivers.

Suggested-by: Michal Simek <michal.simek@amd.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20220930120430.42307-2-post@lespocky.de
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-10-05 08:43:53 +02:00
Tom Rini
55ccdee315 Xilinx changes for v2023.01-rc1 (round 2)
xilinx:
 - Add support for new Versal NET SOC
 
 zynqmp:
 - Use mdio bus for ethernet phy description
 - Wire ethernet phy reset via i2c-gpio
 
 versal:
 - Config cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYzGwogAKCRDKSWXLKUoM
 Ial4AJ9+4WHn0MV2X7gK1fyh4lUW7ggPhQCggsYlSoACgMgdji17SAPhCv/W3IA=
 =BmA9
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.01-rc1-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2023.01-rc1 (round 2)

xilinx:
- Add support for new Versal NET SOC

zynqmp:
- Use mdio bus for ethernet phy description
- Wire ethernet phy reset via i2c-gpio

versal:
- Config cleanup
2022-09-26 11:28:14 -04:00
Michal Simek
f6aebdf676 arm64: versal-net: Add support for Versal NET platform
Versal NET platform is based on Versal chip which is reusing a lot of IPs.
For more information about new IPs please take a look at DT which describe
currently supported devices.
The patch is adding architecture and board support with soc detection
algorithm. Generic setting should be very similar to Versal but it will
likely diverge in longer run.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-26 14:23:29 +02:00
Weijie Gao
812f3c4e0a MAINTAINERS: update maintainer for MediaTek ARM platform
Add new files for MediaTek ARM platform

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-23 15:09:16 -04:00
Tom Rini
e9a1ff9724 Merge branch 'master' into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-19 16:07:12 -04:00
Fabio Estevam
b7d29fd8a7 MAINTAINERS: imx: Add an entry for the serial driver
Currently, when running ./scripts/get_maintainer.pl on serial_mxc.c
no i.MX maintainer is returned.

Fix it by adding an entry for this driver.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
2022-09-18 22:56:10 +02:00
Jayesh Choudhary
29e1044741 configs: Add configs for j721s2 High Security EVM
Add j721s2 High Security EVM defconfig.

These configs are same as for the non-secure part, except for:
        CONFIG_TI_SECURE_DEVICE option set to 'y'
        CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
        CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
        CONFIG_BOOTCOMMAND uses FIT images for booting

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
2022-09-15 16:07:45 -04:00