Two of the flags are out of order, so fix this.
Also adjust the ordering of one flag in the main switch()
Signed-off-by: Simon Glass <sjg@chromium.org>
Pytest 7.4.3 complains if a variable is used in a finally clause without
having been initialized before the try clause.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In general terms, we -include include/linux/kconfig.h and so normal
U-Boot code does not need to also #include it. However, for code which
is shared with userspace we may need to add it so that either our full
config is available or so that macros such as CONFIG_IS_ENABLED() can be
evaluated. In this case make sure that we guard these includes with a
test for USE_HOSTCC so that it clear as to why we're doing this.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Display the STMicroelectronics logo with features VIDEO_LOGO and
SPLASH_SCREEN on stm32f469-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
- Add TPM support for venice boards
- Add networking support for imx93-evk
- Enable TCP, IPv6, wget for DHCOM and Data Modul boards
- Enable fastboot support for Toradex boards
- Allow pico-imx7d to boot from SD
- Enable fastboot for beacon imx8m beacon boards, disabled
SYS_CONSOLE_IS_IN_ENV
- Fix mxsboot to prevent NAND blocks being reported as bad
- Add imx8mm PWM clock support
- Several devicetree syncs with the kernel
- Add support for i.MX8MP Polyhex Debix Model A SBC
- Reworked ddr_load_train_firmware() to get a 50ms boot time improvement
old_val can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
K3 devices introduces the concept of centralized power, resource and
security management to System Firmware. This is to overcome challenges
by the traditional approach that implements system control functions on
each of the processing units.
The software interface for System Firmware is split into TIFS and DM. DM
(Device Manager) is responsible for resource and power management from
secure and non-secure hosts. This additional binary is necessary for
specific platforms' ROM boot images and is to be packaged into tispl.bin
Add an entry for DM. The entry can be used for the packaging of
tispl.bin by binman along with ATF and TEE.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
A new release has been done with this version, so update it. Use the
version numbers in dependencies also.
Signed-off-by: Simon Glass <sjg@chromium.org>
The files list is incorrect and dates from a time when the script was
run from a different directory. Update it to match all the other tools.
Signed-off-by: Simon Glass <sjg@chromium.org>
Correct a heading which is too short in the readme.
Fixes: 75554dfac2 ("patman: Add support for building a u_boot_tools...")
Signed-off-by: Simon Glass <sjg@chromium.org>
The tool works for me, with imx28 and NAND memory, but the resulting
blocks are reported as bad, both by u-boot and the kernel.
This makes it impossible to erase from Linux (for an upgrade without
console access, for example -- u-boot can "nand scrub" but linux can't).
pre-filling with 0xff creates a proper boot loader image, but no
bad-block marker is there when written to flash.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
When running 'mkimage -l' is called for a valid StarFive file an error
message "Error: invalid marker bytes" is written by the Renesas SPKG
driver.
mkimage -l may be invoked without specifying an image type. In this case
mkimage iterates over all image type drivers to find the one that matches.
None of the non-matching drivers should write an error message.
Fix the Renesas SPKG driver.
Fixes: afdfcb11f9 ("tools: spkgimage: add Renesas SPKG format")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The importlib_resources import is not actually used. Fix this so that
patman can run on Python 3.6 to some extent, once
'pip3 install importlib-resources' has been run.
Signed-off-by: Simon Glass <sjg@chromium.org>
Import this only when it is needed, since it is not present when
installed via 'pip install'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: https://source.denx.de/u-boot/u-boot/-/issues/26
Move this code into a separate cmdline module, as is done with the
other tools.
Use the same HAS_TESTS check as buildman
Signed-off-by: Simon Glass <sjg@chromium.org>
Title underlines should match the length of the title. Unfortunately
docutils only catches underlines that are too short.
Add some missing empty lines after titles.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
'git status' shows 'tools/generated/' after running the build, which is
wrong. The corresponding .gitignore rule was already added in commit
c623642d29 ("Adjust gitignore for tools/generated/"), but because of
superfluous 'tools/' part it wasn't in effect. Remove incorrect 'tools/'
part to fix it.
While at it, remove tools/ path incorrectly added to the top-level
.gitignore in commit 801c482207 (".gitignore: ignore misc include,
simple-bin, and tools/generated build artifacts"), as it's required in
the comment on the top of .gitignore:
# NOTE! Don't add files that are generated in specific
# subdirectories here. Add them in the ".gitignore" file
# in that subdirectory instead.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: c623642d29 ("Adjust gitignore for tools/generated/")
Fixes: 801c482207 (".gitignore: ignore misc include, simple-bin, and tools/generated build artifacts")
We cannot be sure that the new config is consistent, particularly when
changing a major item like CONFIG_CMDLINE. Use 'make oldconfig' to
check that and avoid any such problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
It isn't clear why we need to have two different paths for closing down
the pipe. Unify them and use the Python to avoid this warning:
subprocess.py:1127: ResourceWarning: subprocess 83531 is still running
Note that this code appears to originally have come from [1] and was
committed into the ChromeOS chromiumos/platform/crosutils repo in the
bin/cros_image_to_target.py file. The addition of the extra code path
came later, so that is chosen for the fixes tag.
[1] https://codereview.chromium.org/3391008
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: a10fd93cbc patman: Make command methods return a CommandResult
Buildman assumes that branch names do not have a slash in them, since
slash is used to delimit remotes, etc. This means that a branch called
'WIP/tryme' in remote dm ends up being 'tryme'.
Adjust the logic a little, to try to accommodate this.
For now, no tests are added for this behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
According to the TRMs of K3 platform of devices, the ROM boot image
format specifies a "Core Options Field" that provides the capability to
set the boot core in lockstep when set to 0 or to split mode when set
to 2. Add support for providing the same from the binman DTS. Also
modify existing test case for ensuring future coverage.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
When symbols switch between the inited data section and the read-only
data section their visbility changes, at present, with the -B option.
This is confusing, since adding 'const' to a variable declaration can
make it look like a significant improvement in bloat. But in fact
nothing has changed.
Add 'r' to the list of symbols types that are recorded, to correct this
problem. Add a constant to make it easier to find this code next time.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
cbfsutil completely changed the way that stages are formatted in CBFS.
Adjust the binman implementation to do the same.
This mirrors commit 81dc20e744 in coreboot.
Signed-off-by: Simon Glass <sjg@chromium.org>
cbfsutil changed to 4-byte alignment for filenames instead of 16.
Adjust the binman implementation to do the same.
This mirrors commit 5779ca718c in coreboot.
Signed-off-by: Simon Glass <sjg@chromium.org>
cbfsutil changed to write zero bytes instead of 0xff when a small
padding must be added. Adjust the binman implementation to do the same.
Drop the code which looks for an unused attribute tag, since it is not
used. A future patch moves the attributes to the end of the header in
any case, so no data will follow the attributes.
This mirrors commit f0cc7adb2f in coreboot.
Signed-off-by: Simon Glass <sjg@chromium.org>
cbfsutil changed to skip adding a compression attribute if there is no
compression. Adjust the binman implementation to do the same.
This mirrors commit 105cdf5625 in coreboot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
For tests which fake bintools being missing, we need to reset the list
afterwards, to ensure that future tests do not also see the bintools as
missing.
Reset the list when processing is complete.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
A Change-Id can be useful for traceability purposes, and some projects
may wish to have them preserved. This change makes it configurable
via a new 'keep_change_id' setting.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Do not leak file descriptor if writing fails.
Correct the error text if opening a file fails.
Addresses-Coverity-ID: 467054 Resource leaks
Fixes: 64fd30d367 ("tools: mkimage: Add StarFive SPL image support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
At this point in time we should not add common.h to any new files, so
make checkpatch.pl complain.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support in binman for generating EFI empty capsules. These
capsules are used in the FWU A/B update feature. Also add test cases
in binman for the corresponding code coverage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a method to the mkeficapsule bintool to generate empty
capsules. These are capsules needed for the FWU A/B update feature.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The various fields of a generated capsule are currently verified
through hard-coded offsets. Use the dump-capsule feature for dumping
the capsule header contents and use those for capsule verification.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The #address-cells and #size-cells are not needed for running the
capsule generation binman tests. Remove the superfluous properties.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add support to dump the contents of capsule headers. This is useful as
a debug feature for checking the contents of the capsule headers, and
can also be used in capsule verification.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The argument type of `build_from_git` was changed from string to list
in d71e711699.
This commit adapts the argument type of all bintools using this
function.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
This is part of a longer series, which isn't quite ready. Revert this
for now at least.
This reverts commit 4cb6c8e5f0.
Signed-off-by: Tom Rini <trini@konsulko.com>
The man page correctly said that -B was ignored without -E, while the
`mkimage -h` output suggested otherwise. Now that -B can actually be
used by itself, update the man page.
While at it, also amend the `mkimage -h` line to mention the
connection with -E.
The FDT header is a fixed 40 bytes, so its size cannot (and is not)
modified, while its alignment is a property of the address in RAM one
loads the FIT to, so not something mkimage can affect in any way. (In
the file itself, the header is of course at offset 0, which has all
possible alignments already.)
Reported-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
