Commit graph

65403 commits

Author SHA1 Message Date
Heinrich Schuchardt
3547e69b47 doc: dfu: fix typos in README.dfu
Fix some typos.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
f39c8454b5 doc: dfu: add DFU to HTML documentation
Add the device firmware update functions to the generated HTML
documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
378fc83ebd doc: dfu: describe eMMC partition number parameter
In dfu_alt_info for eMMC the eMMC partition number can be specified.

The separator in dfu_alt_info is a semicolon not a comma.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
51028db1ca MAINTAINERS: add doc/driver-model/ to DRIVER MODEL
The documentation should rest with the same maintainer as the code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Peng Fan
b4b2619211 armv8: cache_v8: fix mmu_set_region_dcache_behaviour
The enum dcache_optoion contains a shift left 2 bits in the armv8 case
already.  The PMD_ATTRINDX(option) macro will perform a left shift of 2
bits.  Perform a right shift so that in the end we get the correct
value.

[trini: Reword the commit message]
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-25 11:54:53 -04:00
Tom Rini
9c5fef5774 Merge git://git.denx.de/u-boot-usb
- DM support for OMAP
- DWC3 fix
- Typo fix in eth/r8152
2020-05-22 22:58:50 -04:00
Tom Rini
5b6b2c6bf8 Merge branch 'net' of git://git.denx.de/u-boot-socfpga
- ks8851 cleanups and DM migration
2020-05-22 22:58:16 -04:00
Marek Vasut
df4c4834fc net: ks8851: Add Kconfig entries
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
1d476de7c8 net: ks8851: Add DM support
Add support for U-Boot DM and DT probing.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
9c9f3fc162 net: ks8851: Receive one packet per recv call
Instead of reading out the entire FIFO and possibly overwriting U-Boot
memory, read out one packet per recv call, pass it to U-Boot network
stack, and repeat. It is however necessary to cache RXFC value, because
reading that one out clears it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
f725912624 net: ks8851: Split non-DM specific bits from common code
Split network handling functions into non-DM specific parts and
common code in preparation for conversion to DM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
b7c6ae2e82 net: ks8851: Pass around driver private data
Introduce a private data structure for this driver with embedded
struct eth_device and pass it around. This prepares the driver to
work with both DM and non-DM systems.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
8ec27b01bc net: ks8851: Checkpatch cleanup
Fix various checkpatch complaints.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
eb69d8bf3c net: ks8851: Clean up chip ID readout
There is only one chip ID in the table of chip IDs for this chip.
Read out the chip ID instead and mask off the last "revision" bit
to check the chip ID, this works for all chips in the family. Then
drop the chip ID passing around.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
63f22f5998 net: ks8851: Remove type_frame_head
The packet status and length information should be extracted from the
FIFO per-packet. Adjust the code such that it reads the packet meta
data and then the packet afterward, if applicable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
b043597673 net: ks8851: Trim down struct ks_net
Most of the entries in the structure are useless, remove them. Inline
the rest of uses where applicable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
6a45731364 net: ks8851: Use 16bit RXQCR access
Per KS8851-16MLL, the RXQCR is a 16bit register. Use 16bit accessors
to it consistently and drop the ks_wrreg8() function altogether, as
it is not used anymore.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
8b41a16711 net: ks8851: Remove RXQCR cache
The cached RXQCR value is never updated, remove the cache and just use
the bits in the cache directly in the code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Marek Vasut
e3b54cda68 net: ks8851: Replace malloc()+memset() with calloc()
Replace combination of malloc()+memset() with calloc() as the behavior
is exactly the same and the amount of code is reduced. Moreover, remove
printf() in the fail path, as it is useless, and return proper -ENOMEM
return code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Tom Rini
f53c2dc162 Merge tag 'u-boot-rockchip-20200522' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rk3288 chromebook veyron support;
- Add pcie driver support for rk3399;
- other fixes for rk3399 boards
2020-05-22 10:28:38 -04:00
Tom Rini
a9f793a30d - Fix i.MX8QXP boot hang when getting CPU temperature
-----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXse5FQ4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXPBfAJ9KNsTM95wQTc/E2zL5hfd58sS3dwCePgugeAkj
 +NCwAgKCABJFdS/yBK0=
 =w9C+
 -----END PGP SIGNATURE-----

Merge tag 'imx8qxp-fixes' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- Fix i.MX8QXP boot hang when getting CPU temperature
2020-05-22 10:28:26 -04:00
Tom Rini
2fdb5cd69c Pull request for UEFI sub-system for efi-2020-07-rc3 (2)
Problems fixed with these patches are:
 
 * UEFI sub-system not working with virtio block devices
 * Missing SATA support in UEFI sub-system
 * A superfluous debug statement
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl7Hb8sACgkQxIHbvCwF
 GsR3tA/+NknuzED4AkdVL0uRWw4kZNcSqxY+lpFUC73iWN0gLTWKFO6IXDRF4Jox
 3/xWSkMuPkeAp6sjl+Gv8DD2DCkNJedXeMdeAGZzPDLfXn16wmzhjvIe5xz8cr/2
 0shL5PtTWK8BR/ClSxTANoYrASGUISIpyq3Tu/dKY9PCGesfvzObmv+n06HizR+b
 E2ceSqVfEBZNLkp38o/PAOdrayjJCz7oSGxBhFQx1x3LYV/G6iHWdg9Kw+KsVdmR
 GBh1frun8MbC9NOqWjdnMmKi1CeHeCvvBu38lXzpVlfB0VcC2UFeuGaRh1aDKdnq
 CAiV20v9JygEwcxLGIEU4r+RwoqSxkbMbB2nlLnDuFmoJCC8gEK0ctUaFFrOV9i3
 xB/ynnw4zlht039fv8Qaq6OPiHbzA5qGmE93DY4p6a+iV0Mplfy6qLXw+UWpFEGG
 lGBZ2NPu04qjbZdzKCDag6Uw3oEypYMe3CO8Hg7EAQBB49v10LdhtgPm2BgZaaJn
 ZmYqzF0+FB1znPGmu6hrxT6IPHy+fP0cxxEma5kxXTp6CapXLHl84v4JGqNPpqmN
 jPV4MtmZaBXgasL1TDUCgpuNTEVcBcl49VastpPNMNjPPE/UD+oUXHbW+Lp1u1BH
 Jn5rCODNi5gah1X/vQ+yFC7Pk95RE0vqYDbdSUR2Wn1WurfbMzQ=
 =o+Cy
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-07-rc3-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-07-rc3 (2)

Problems fixed with these patches are:

* UEFI sub-system not working with virtio block devices
* Missing SATA support in UEFI sub-system
* A superfluous debug statement
2020-05-22 10:27:24 -04:00
Tom Rini
74ce1f8c6f UniPhier SoC updates for v2020.07
- De-assert write protect for Denali NAND driver
 
  - Clean up include directives
 
  - Migrate to DM_ETH, and remove legacy board_eth_init()
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl7HOCkeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGu2gP/j8NZVO/UHVgK8Ok
 bN/DJmbSH9sO/9UagQlnq4ft7wiZnCR6JOmGcNxX1wj2HF9tsmRHpl84GQWK9ehL
 b8ksZ+OMJT2lItB5BFIbxu8Tq94HUwYmethSiYIYzxRvhR1FPKQLE90P9NYzHXei
 E/1D+AAG2XWOXD6PSMS1dpINMnGq/TaLR+jqenHN3fc43AMH08FS/15Om2DzrS50
 WSwg+OmaUWGZQijKJS08fsK9tKjMDk36GVzba/XQcUEdmG9bKBXmDf518sPmxykt
 Mo6SA83k1RXOgv0Md4Kbd8QB3y5Up6fYQyVgtKNr8laIForFUwuq5PiDzL2NWfkv
 2Olg2BnwAmpNvBTTIMEmuaeJEIklojRMTWYyAhQxxr/s+kmUwkqpwkkOEJEmv0Iw
 kSM9eX8S6Wf5VgX+zRg+ytBt+OcRqruvhbf2EPcMU9JYtg5FK+0I5p/KWyrDTcEq
 7fAUtcjl5OuB+MaK49UzNILiPxAYuWMoEdBElpU5EqP6hr/vepFh3fmXepbd/jx7
 D84zrDhyeyXXkagD2NKa5M3Baz9IaOYRdSnfUR5V3ajtnG9wiNfMUWDrRXQaIGhE
 U4LfXjtZIMcahdRlfnM2rnaH1CRqqXbuWy3s1mk9HAGQThZjoWURmk1c7Mzb6cpi
 pq91TL2svPeuiRBF02BOq5XJxugg
 =7vA1
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2020.07

 - De-assert write protect for Denali NAND driver

 - Clean up include directives

 - Migrate to DM_ETH, and remove legacy board_eth_init()
2020-05-22 10:27:06 -04:00
Hayes Wang
2cff87f7ab eth/r8152: fix typo in register name
The PAL_BDC_CR should be PLA_BDC_CR.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-05-22 15:22:37 +02:00
Chunfeng Yun
58221d7e87 usb: dwc3: fix NULL pointer issue
The phy_bulk pointer *usb_phys is used before allocated,
fix it by using a phy_bulk variable instead in
xhci_dwc3_platdata struct

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-05-22 15:22:36 +02:00
Adam Ford
94ed66194f usb: ehci-omap: Add Support for DM_USB and OF_CONTROL
The omap3.dtsi file shows the usbhshost node with two sub-nodes
for ohci and ehci.  This patch file creates the usbhshost, and
pulls the portX-mode information.  It then locates the EHCI
sub-node, and initializes the EHCI controller with the info
pulled from the usbhshost node.

There is still more to do since there isn't an actual link
between the 'phys' reference and the corresponding phy driver,
and there is no nop-xceiv driver yet.

In the meantime, the older style reference to
CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull
the phy out of reset until the phy driver is completed and the
phandle reference is made.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-22 15:22:35 +02:00
Kurt Miller
33863f744d rockchip: rk3328: rock64 - fix gen3 SPL hang
Use the same approach as ROC-RK3328-CC which enables SPL GPIO,
pinctl and regulator support. This allows the gen3 board to
boot through SPL and does not break gen2 in the process.

Signed-off-by: Kurt Miller <kurt@intricatesoftware.com>
Acked-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Urja Rannikko
5e50f8787c defconfig: veyron: no need for CONFIG_SPL_PINCTRL_FULL
Veyrons do not need full pinctrl support for SPL.
The full pinctrl support does nothing when enabled with OF_PLATDATA,
thus was already unused.
This frees about 4kB of SPL size.

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Urja Rannikko
e68a843601 rockchip: spl-boot-order: do not attempt to access fdt if OF_PLATDATA
gd->fdt_blob is null if using OF_PLATDATA in SPL, which causes a hang
after f0921f5098 ("fdt: Sync up to the latest libfdt").
We use the same test that is used in spl_common_init on whether to call
fdtdec_setup to unconditionally avoid linking in the fdt-using code
when not necessary and thus reduce SPL size.

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Urja Rannikko
fffdf7290c rockchip: veyron: move board_early_init_f to _r (after reloc)
Previously veyron_init() was called in board_init() context, which is
called after relocation. Moving it to veyron.c used board_early_init_f
which is called way earlier, and causes veyron_init to hang.
Using board_early_init_r instead fixes this.

Fixes: b678f2790c ("rockchip: rk3288: Move veyron_init() back to veyron.c")
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Urja Rannikko
353ad95aa6 rockchip: spl: veyron speedy boots from SPI
Apparently speedy was forgotten from this list of veyron devices.

Fixes: 49105fb7ed ("rockchip: add common spl board file")
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Heinrich Schuchardt
69cd0c463d tools: value checks in rkcommon_check_params()
Building with -Wtype-limits yields

tools/rkcommon.c: In function ‘rkcommon_check_params’:
tools/rkcommon.c:158:27: warning: comparison of
unsigned expression < 0 is always false [-Wtype-limits]
  158 |  if (spl_params.init_size < 0)
      |                           ^
tools/rkcommon.c:165:28: warning: comparison of
unsigned expression < 0 is always false [-Wtype-limits]
  165 |   if (spl_params.boot_size < 0)
      |

Fix the value checks.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Jagan Teki
0672e9803b rockchip: Enable PCIe/M.2 on rock960 board
Due to board limitation some SSD's would work
on rock960 PCIe M.2 only with 1.8V IO domain.

So, this patch enables grf io_sel explicitly to
make PCIe/M.2 to work.

Cc: Tom Cubie <tom@radxa.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Jagan Teki
765a12d6a3 rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2
Enable PCIe/M.2 support on
- NanoPC-T4
- ROC-RK3399-PC Mezzanine boards.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Jagan Teki
89f2fa0b5e pci: Add Rockchip PCIe PHY controller driver
Yes, it is possible to have a dedicated UCLASS PHY driver
for this Rockchip PCIe PHY but there are some issues on
Generic PHY framework to support the same.

The Generic PHY framework is unable to get the PHY if
the PHY parent is of a different uclass.

Say if we try to get the PCIe PHY then the phy-uclass
will look for PHY in the first instance if it is not
in the root node it will try to probe the parent by
assuming that the actual PHY is inside the parent PHY
of UCLASS_PHY. But, in rk3399 hardware representation
PHY like emmc, usb and pcie are part of syscon which
is completely a different of UCLASS_SYSCON.

Example:

grf: syscon@ff770000 {
   compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
   reg = <0x0 0xff770000 0x0 0x10000>;
   #address-cells = <1>;
   #size-cells = <1>;

   pcie_phy: pcie-phy {
       compatible = "rockchip,rk3399-pcie-phy";
       clocks = <&cru SCLK_PCIEPHY_REF>;
       clock-names = "refclk";
       #phy-cells = <1>;
       resets = <&cru SRST_PCIEPHY>;
       drive-impedance-ohm = <50>;
       reset-names = "phy";
       status = "disabled";
   };
};

Due to this limitation, this patch adds a separate PHY
driver for Rockchip PCIe. This might be removed in future
once Generic PHY supports this limitation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Jagan Teki
99d59069c0 pci: Add Rockchip PCIe controller driver
Add Rockchip PCIe controller driver for rk3399 platform.

Driver support Gen1 by operating as a Root complex.

Thanks to Patrick for initial work.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
2020-05-22 20:53:20 +08:00
Jagan Teki
912f633d01 clk: rk3399: Enable/Disable the PCIEPHY clk
Enable/Disable the PCIEPHY clk for rk3399.

CLK is clear in both enable and disable functionality.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Jagan Teki
30d09a2f17 clk: rk3399: Add enable/disable clks
Yes, most of the high speed peripheral clocks
in rk3399 enabled by default.

But it would be better to handle them via clk
enable/disable API for handling proper reset
conditions like 'usb reset' over command line.

So, enable USB, GMAC clock via enable/disable ops.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil.m@amarulasolutions.com> # roc-rk3399-pc
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Andrius Štikonas
1266ef105f rockpro64: Enable HDMI output on rockpro64 board
Reference to commit that adds HDMI to other rk3399 boards:
commit 9778edae55 ("rockchip: Enable HDMI output on rk3399 board w/ HDMI")

Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22 20:53:20 +08:00
Anatolij Gustschin
4e7413a998 thermal: imx_scu_thermal: prevent boot hang with zero pdata
Should initialization of pdata values have failed for some reason,
we end up in endless loop when getting the CPU temperature value
and can not boot. Check alert value in pdata and only retry reading
temperature if alert value is not zero. Also shorten the temperature
info string.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-05-22 13:29:25 +02:00
Anatolij Gustschin
74e8fb03bd cpu: imx8: use intended cpu-thermal device when getting temp value
This fixes getting DT alert and critical pdata values in imx_scu_thermal
driver. On i.MX8QXP using not initialized alert pdata value resulted in
boot hang and endless loop outputting:
CPU Temperature (47200C) has beyond alert (0C), close to critical (0C) waiting...

While at it, preset CPU type values once to avoid multiple calls
of device_is_compatible() for same property.

Fixes: 3ee6ea443e ("cpu: imx_cpu: Print the CPU temperature for iMX8QM A72")
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-22 13:27:46 +02:00
Anatolij Gustschin
69365540cf cpu: imx8: fix type and rate detection
CPU type and rate detection is broken, for A35 cpu we get A53:
...
sc_pm_get_clock_rate: resource:0 clk:2: res:3
Could not read CPU frequency: -22
CPU:   NXP i.MX8QXP RevB A53 at 0 MHz at 47C

Fixes: 55bc96f3b6 ("cpu: imx8: fix get core name and rate")
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-22 13:26:33 +02:00
Deepak Das
5c606ca35c rockchip: rk3399: enable spl-fifo-mode for sdmmc
adapting commit fa2047c473 ("rockchip: rk3328: enable spl-fifo-mode
for emmc and sdmmc") for rk3399.
Since mmc to sram can't do dma, add patch to prevent aborts transferring
TF-A parts.

Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-22 17:24:30 +08:00
Heiko Stuebner
6393357c53 board: puma: use dtb given on the commandline instead of using u-boot.dtb
The make_fit_spl scripts get the dtb to use as commandline option,
so use it for puma as well.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2020-05-22 17:24:30 +08:00
Masahiro Yamada
6cbe90486c ARM: uniphier: remove board_eth_init()
This platform completely migrated to CONFIG_DM_ETH.

board_eth_init() is only called from net/eth_legacy.c

Remove the legacy hook.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22 11:21:06 +09:00
Masahiro Yamada
6717e15447 ARM: uniphier: delete or replace <common.h> includes
<common.h> pulls in a lot of bloat. <common.h> is unneeded in most of
places.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 11:21:06 +09:00
Masahiro Yamada
1e1518866f ARM: uniphier: drop #include <log.h> again
I do not understand the changes made to these files by
commit f7ae49fc4f ("common: Drop log.h from common header").

  git show f7ae49fc4f -- arch/arm/mach-uniphier/

None of them uses the log function feature.

Simply revert the changes made to these files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 11:21:06 +09:00
Masahiro Yamada
e9d3b23505 ARM: uniphier: drop #include <init.h> again from umc-pxs2.c
I do not understand the change made to this file by
commit 691d719db7 ("common: Drop init.h from common header").

  git show 691d719db7 -- arch/arm/mach-uniphier/dram/umc-pxs2.c

This file does not call or define any functions declared in <init.h>

Simply revert the change made to this file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 11:21:06 +09:00
Masahiro Yamada
e6396fcab2 ARM: uniphier: remove #include <net.h> again from micro-support-card.c
I do not understand the changes made to this file by
commit 90526e9fba ("common: Drop net.h from common header").

  git show 90526e9fba -- arch/arm/mach-uniphier/micro-support-card.c

The necessary declaration is already included by <netdev.h> at line 112.
It also moved the <dm/of.h> inclusion, but I do not understand the
motivation of doing so, either.

Simply revert the changes made to this file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22 11:21:06 +09:00
Masahiro Yamada
f49049a8ec ARM: uniphier: include <asm/system.h> instead of <asm/cache.h> from psci.c
I do not understand the change made to this file by
commit 90526e9fba ("common: Drop net.h from common header").

  git show 90526e9fba -- arch/arm/mach-uniphier/arm32/psci.c

It added <asm/cache.h> while this file does not call the standard cache
functions at all.

All the uniphier-specific cache functions, uniphier_cache_*() are
declared in cache-uniphier.h, which is already included from this file.

Including <asm/system.h> is sensible to fix the -Wmissing-prototypes
warnings because this file defines psci_cpu_on and psci_system_reset().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 11:21:06 +09:00