rockchip: Enable PCIe/M.2 on rock960 board

Due to board limitation some SSD's would work
on rock960 PCIe M.2 only with 1.8V IO domain.

So, this patch enables grf io_sel explicitly to
make PCIe/M.2 to work.

Cc: Tom Cubie <tom@radxa.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jagan Teki 2020-05-09 22:26:24 +05:30 committed by Kever Yang
parent 765a12d6a3
commit 0672e9803b
2 changed files with 29 additions and 0 deletions

View file

@ -2,3 +2,27 @@
/*
* Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
#include <common.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
#include <linux/bitops.h>
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
struct rk3399_grf_regs *grf =
syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
/**
* Some SSD's to work on rock960 would require explicit
* domain voltage change, so BT565 is in 1.8v domain
*/
rk_setreg(&grf->io_vsel, BIT(0));
return 0;
}
#endif

View file

@ -9,6 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
CONFIG_MISC_INIT_R=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
@ -19,6 +20,7 @@ CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_PCI=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
@ -36,10 +38,13 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_DM_ETH=y
CONFIG_NVME=y
CONFIG_PCI=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_DM_RESET=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y