This patch adds support for mtmips SoCs to initialize the SDRAM.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
The sysreset driver has a config CONFIG_SPL_SYSRESET for the spl stage.
Change CONFIG_SYSRESET to CONFIG_IS_ENABLED(SYSRESET) will give spl a
chance to use _machine_restart instead of the sysreset driver.
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
CONFIG_SYS_SDRAM_BASE points to cached memory, i.e. KSEG0, which is not
suitable for detecting memory size.
Replace CONFIG_SYS_SDRAM_BASE with KSEG1, and make dram_init() always do
memory size detection in any stage.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Currently only mt7628 needs the sysreset driver, do not select it for
mt7620.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
This patch is a preparation for add a new soc fot mtmips.
Move all mt7628 related Kconfig (boards and UART selection) into mt7628
subdirectory and make sure the top directory of mtmips contains only
selection for SoCs.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Previous the dts files for gardena-smart-gateway-mt7688 and
linkit-smart-7688 are set to be built when mtmips is selected.
This can lead to a compilation error if another soc is added to this arch
with different dtsi files.
So it's better to build the dtb only if their board is selected.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Unfortunately we now see a number of now-fatal warnings about duplicate
labels. It is often unclear how best to re-write the document in
question to not duplicate these otherwise logical headings.
This reverts commit 10a1df3cd4.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert test/py/README.md to restructured text and add it to the generated
HTML documentation.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Move test/README to the 'Develop U-Boot' chapter of the HTML documentation.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Update the help message used for 'make help':
Documentation targets:
Linux kernel internal documentation in different formats from ReST:
=>
U-Boot documentation in different formats from ReST:
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Update the docomentation build system according to Linux v5.11-rc1.
With this patch we can build the HTML documentation using either of
Sphinx 2 and Sphinx 3.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
[Fix warning in b4860qds.rst about "Switch Settings"]
Signed-off-by: Tom Rini <trini@konsulko.com>
The field Media.LastBlock of the EFI_BLOCK_IO_PROTOCOL.Media was filled
incorrectly both for block devices as well as for partitions.
The field must be filled with the index of the last logical block (LBA):
* block devices: device size minus 1
* partitions: partition size minus 1
Reported-by: Alexander von Gluck IV <kallisti5@unixzen.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The UEFI specification requires event notification levels to be
> TPL_APPLICATION and <= TPL_HIGH_LEVEL.
With the patch the CreateEvent() and CreatedEventEx() services are changed
to check that the notification level is not TPL_APPLICATION.
Reference:
UEFI Specification 2.8 Errata B, table 27 "TPL Restrictions",
"Event Notification Levels"
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Miscellaneous fixes in the mkeficapsule utility -- these include a few
resource leak issues flagged by Coverity along with some additional
code improvements suggested by Heinrich during code review.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Fill reserved members of efi_firmware_management_capsule_image_header
structure with zero's for safety.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Fixes: CID 316354
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
CID 316361 says:
> Passing argument "count * 8UL /* sizeof (*files) */" to
> function "dlmalloc" and then casting the return value to "u16 **" is
> suspicious. In this particular case "sizeof (u16 **)" happens to be equal
> to "sizeof (u16 *)", but this is not a portable assumption.
> > 767 tmp_files = malloc(count * sizeof(*files));
The change in this patch fixes the ambiguity.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Fixes: CID 316361
For readability use *tmp_files instead of tmp_files[0]
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
CID 316364 says:
> Null pointer dereferences (FORWARD_NULL)
> printf("Result total size: 0x%x\n", result->variable_total_size);
at do_efi_capsule_res().
The code is basically safe because a buffer for "result" is allocated
by malloc() and filled up by the second get_variable(), which fails any way
if the allocation has failed.
But the first (and second) get_variable() possibly returns an error other
than EFI_SUCCESS. We always need to check the return code from
get_variable() before accessing the data in "result".
While this change won't suppress CID 316364, the resulting code is much
safer.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Use the correct GUID when closing the file load protocol.
Remove an unnecessary check (Coverity CID 316363).
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The short name and extension of FAT files are stored in adjacent fields of
the directory entry. For some operations like calculating a checksum or
copying both fields it is preferable to treat both as one structure.
Change the definition of the directory entry structure to include a
structure comprising the name and the extension field.
This resolves Coverity CID 316357, CID 316350, CID 316348.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide function description for flush_dir().
Move all error messages for flush_dir() from the callers to the function.
Move mapping of errors to -EIO to the function.
Always check return value of flush_dir() (Coverity CID 316362).
In fat_unlink() return -EIO if flush_dirty_fat_buffer() fails.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The UBI_IOCVOLUP ioctl can fail if exclusive access to the volume isn't
obtained. If this happens, the flush operation doesn't return error,
leaving the caller without knowledge of missing flush.
Fix this by forwarding the error (-1) from ubi_update_start().
Fixes: 34255b92e6 ("tools: env: Add support for direct read/write UBI volumes")
Signed-off-by: Martin Hundebøll <martin@geanix.com>
These commands were disabled when CONFIG_FIT_SIGNATURE is disabled, but
they do not depend on crypto support so they can be unconditionally
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
When CONFIG_FIT_CIPHER=y and CONFIG_FIT_SIGNATURE=n is there is no
implementation of image_get_host_blob for mkimage/dumpimage:
/usr/bin/ld: tools/common/image-cipher.o: in function `fit_image_decrypt_data':
image-cipher.c:(.text+0x9a): undefined reference to `image_get_host_blob'
Move the implementation to a common file so it can be shaed between
image-cipher.c and image-fit-sig.c.
Signed-off-by: Joel Stanley <joel@jms.id.au>
If CONFIG_FIT_CIPHER is enabled without CONFIG_FIT_SIGNATURE then
mkimage/dumpimage will fail to link:
/usr/bin/ld: tools/common/image-cipher.o: in function `fit_image_decrypt_data':
image-cipher.c:(.text+0x9a): undefined reference to `image_get_host_blob'
/usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x10): undefined reference to `EVP_aes_128_cbc'
/usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x40): undefined reference to `EVP_aes_192_cbc'
/usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x70): undefined reference to `EVP_aes_256_cbc'
/usr/bin/ld: tools/lib/aes/aes-encrypt.o: in function `image_aes_encrypt':
aes-encrypt.c:(.text+0x22): undefined reference to `EVP_CIPHER_CTX_new'
/usr/bin/ld: aes-encrypt.c:(.text+0x6f): undefined reference to `EVP_EncryptInit_ex'
/usr/bin/ld: aes-encrypt.c:(.text+0x8d): undefined reference to `EVP_EncryptUpdate'
/usr/bin/ld: aes-encrypt.c:(.text+0xac): undefined reference to `EVP_CIPHER_CTX_free'
/usr/bin/ld: aes-encrypt.c:(.text+0xf2): undefined reference to `EVP_EncryptFinal_ex'
collect2: error: ld returned 1 exit status
Signed-off-by: Joel Stanley <joel@jms.id.au>
The propoerty sign-images points to images in the configuration
node. But thoses images may references severals "sub-images" (for
example for images loadable). This commit adds the support of
severals sub-images.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
This commit creates a function fit_config_add_hash that will be
used in the next commit to support several 'sub-images'.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
** Introduction
There are currently four ways to load an OS image with u-boot
1. SPL -> u-boot -> bootm
2. SPL blue falcon mode
3. "Basic" FIT image (CONFIG_LOAD_FIT)
4. "Full-featured" FIT image (CONFIG_LOAD_FIT_FULL)
These four code paths were developed independently, and share very
little code. (3) and (4), behave very differently, are littered with
special cases. They even have different DTS syntax and properties.
The cause of this divergence is that the FIT format specification
leaves a number of things open to interpretation. The purpose of this
change is to enable the reduction of code size, duplication, and
complexity by updating and streamlining the FIT format.
We are only marginally concerned with backwards compatibility, because
we don't have inter-compatibility. For example, CONFIG_LOAD_FIT is
able to load images that CONFIG_LOAD_FIT_FULL won't. This is a direct
result of the incompatible syntax between the two implementations.
Ideally, these changes would enable "simple" FIT to be a subset of the
"full" fit implementation, and share most code. These changes should
also eliminate the need for falcon mode (although we are not
advocating for the removal of falcon mode at this time).
** Description of changes
* The "configurations" node is now mandatory
Guessing how to load components based on their "os" and "type" invites
confusion and superfluous heuristics. Instead, require each FIT image
to be explicit on how components should be loaded.
* Eliminate "ramdisk", "setup", "standalone", and "fpga" properties
Having too many special purpose properties requires special-casing
FIT loading code. When a special property can be handled by another
property, it is redundant.
- A "ramdisk" is identical to a loadable. Thus ramdisk images should
be placed under "loadables".
- A "setup" node can be achieved by using a "kernel" or "firmware"
property instead.
- "standalone" is used for u-boot nodes. The correct property to use
in this case is "firmware".
- "fpga" is a loadable
* Prioritize control between "firmware" and "kernel"
"firmware" and "kernel" are special nodes in that control is passed
to the "entry-point" of the image. Both can be present, for example,
an OP-TEE firmware with a linux kernel. When both are present,
control is passed to the "firmware" image.
** Further generalizations (not included herein)
The "firmware" and "kernel" properties could be generalized as a
"next-boot-stage", or similar name. This "next" stage would be special
in that it is both executable, and is the stage that is passed
control. For example, "next-stage" could be an op-tee image, with
linux as a loadable, or a u-boot image.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
- New board: rk3328 NanoPi R2S board;
- Fix init voltage for some rk3399 boards;
- enable rng for rk3399 by default;
- set default to SPI bus 1 for SPI-flash for some board;
- add dwc PCIe controller driver on rockchip platform;
Add Rockchip dwc based PCIe controller driver for rk356x platform.
Driver support Gen3 by operating as a Root complex.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Add the Rockchip Synopsys based PCIe 3.0 PHY driver as
part of Generic PHY framework.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
This adds support for the NanoPi R2S from FriendlyArm.
Rockchip RK3328 SoC
1GB DDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (USB3) (LAN)
USB 2.0 Host Port
MicroSD slot
Reset button
WAN - LAN - SYS LED
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Enable the RNG on the Firefly, rock960 and RockPro64 devices
to enable KASLR on devices that support it.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Akash Gajjar <akash@openedev.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
The rng is embedded in the SoC so enable it in the device tree
universally, the use of it can be controlled by enabling/disabling
at the device config level.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
SPI flash on this machine is located on bus 1, default to using bus 1
for SPI flash and stop aliasing it to bus 0. Formerly the alias spi1
pointed to &spi5, use an alias spi5 for this instead.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Suggested-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
SPI flash on this board is located on bus 1, default to using bus 1 for
SPI flash on both rk3399-roc-pc and -mezzanine, and stop aliasing it to
bus 0.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Fixes: c4cea2bb ("rockchip: Enable building a SPI ROM image on bob")
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Before 'if (err)' we have to initialize the variable otherwise we use a
random value from the stack.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
At the beginning of close_ctree_fs_info() the value 0 is assigned to err
and never changed before testing it.
Let's get rid of the superfluous variable.
Fixes: f06bfcf54d ("fs: btrfs: Crossport open_ctree_fs_info() from btrfs-progs")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
SquashFS supports sprase blocks in files - that is, if a given block is
composed only of zeros, it's not written to the output file to save
space and it's on-disk length field is set to zero to indicate that.
Previously the squashfs driver did not recognise that, and would attempt
to read and decompress a zero-sized block, which obviously failed.
The following command may be used to create a file for testing:
cat <(dd if=/dev/urandom of=/dev/stdout bs=1M count=1) \
<(dd if=/dev/zero of=/dev/stdout bs=1M count=1) \
<(dd if=/dev/urandom of=/dev/stdout bs=1k count=200) >test_file
Signed-off-by: Campbell Suter <campbell@snapit.group>
In __btrfs_map_block() we do a int * int and assign it to u64.
This is not safe as the result (int * int) is still evaluated as (int)
thus it can overflow.
Convert one of the multiplier to u64 to prevent such problem.
In real world, this should not cause problem as we have device number
limit thus it won't go beyond 4G for a single stripe.
But it's harder to teach coverity about all these hidden limits, so just
fix the possible overflow.
Reported-by: Coverity CID 312957
Reported-by: Coverity CID 312948
Signed-off-by: Qu Wenruo <wqu@suse.com>
* Provide a test tool for initial RAM disk provided via load file2 protocol.
* Make more items configurable to reduce code size:
* Boot manager
* EFI_DT_FIXUP_PROTOCOL
* EFI_DEVICE_PATH_UTILITIES_PROTOCOL
* Bug fixes
* avoid EFI runtime symbols in global symbol table
-----BEGIN PGP SIGNATURE-----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=yVF7
-----END PGP SIGNATURE-----
Merge tag 'efi-2021-04-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2021-04-rc1-2
* Provide a test tool for initial RAM disk provided via load file2 protocol.
* Make more items configurable to reduce code size:
* Boot manager
* EFI_DT_FIXUP_PROTOCOL
* EFI_DEVICE_PATH_UTILITIES_PROTOCOL
* Bug fixes
* avoid EFI runtime symbols in global symbol table
