Commit graph

440 commits

Author SHA1 Message Date
Boris Brezillon
27c4792cd2 mtd: nand: automate NAND timings selection
The NAND framework provides several helpers to query timing modes supported
by a NAND chip, but this implies that all NAND controller drivers have
to implement the same timings selection dance. Also currently NAND
devices can be resetted at arbitrary places which also resets the timing
for ONFI chips to timing mode 0.

Provide a common logic to select the best timings based on ONFI or
->onfi_timing_mode_default information. Hook this into nand_reset()
to make sure the new timing is applied each time during a reset.

NAND controller willing to support timings adjustment should just
implement the ->setup_data_interface() method.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[Linux commit: d8e725dd831186a3595036b2b1df9f68cbc6efa3]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:58 +09:00
Sascha Hauer
b893e83330 mtd: nand: Expose data interface for ONFI mode 0
The nand layer will need ONFI mode 0 to use it as timing mode
before and right after reset.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Linux commit: 6e1f9708dbf3c50a8da93c1952a01a7a2acb5e66]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:58 +09:00
Sascha Hauer
46deff57da mtd: nand: convert ONFI mode into data interface
struct nand_data_interface is the designated type to pass to
the NAND drivers to configure the timing. To simplify further
patches convert the onfi_sdr_timings array from type struct
nand_sdr_timings nand_data_interface.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Linux commit: b1dd3ca203fccd111926c3f6ac59bf903ec62b05]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:58 +09:00
Sascha Hauer
01042499b8 mtd: nand: Introduce nand_data_interface
Currently we have no data structure to fully describe a NAND timing.
We only have struct nand_sdr_timings for NAND timings in SDR mode,
but nothing for DDR mode and also no container to store both types
of timing.
This patch adds struct nand_data_interface which stores the timing
type and a union of different timings. This can be used to pass to
drivers in order to configure the timing.
Add kerneldoc for struct nand_sdr_timings while touching it anyway.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Linux commit: eee64b700e26b9bcc6fce024681c31f5e12271fc]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:57 +09:00
Sascha Hauer
1728eb577d mtd: nand: Create a NAND reset function
When NAND devices are resetted some initialization may have to be done,
like for example they have to be configured for the timing mode that
shall be used. To get a common place where this initialization can be
implemented create a nand_reset() function. This currently only issues
a NAND_CMD_RESET to the NAND device. The places issuing this command
manually are replaced with a call to nand_reset().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Linux commit: 2f94abfe35b210e7711af9202a3dcfc9e779219a]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:57 +09:00
Sascha Hauer
6a1ff76ed3 mtd: nand: remove unnecessary 'extern' from function declarations
'extern' is not necessary for function declarations. To prevent
people from adding the keyword to new declarations remove the
existing ones.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Linux commit: 79022591839f110f465cac0223e117b91d47d5db]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:57 +09:00
Boris Brezillon
19d30ded88 mtd: nand: Add an option to maximize the ECC strength
The generic NAND DT bindings allows one to tweak the ECC strength and
step size to their need. It can be used to lower the ECC strength to
match a bootloader/firmware config, but might also be used to get a better
reliability.

In the latter case, the user might want to use the maximum ECC strength
without having to explicitly calculate the exact value (this value not
only depends on the OOB size, but also on the NAND controller, and can
be tricky to extract).

Add a generic 'nand-ecc-maximize' DT property and the associated
NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best
ECC strength and step-size on their own.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
[Linux commit: ba78ee00e1ff84de9b3ad33edbd3ec599099ee82]
[masahiro: of_property_read_bool -> fdt_getprop for U-Boot]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:57 +09:00
Masahiro Yamada
4c61f79b5e mtd: nand: add onfi_* stubs in case ONFI_DETECTION is disabled
Add stubs to the header in case CONFIG_SYS_NAND_ONFI_DETECTION is
disabled.  This is much easier than adding around #ifdef to the
caller side.

Also, I removed the #ifdef around onfi_params.  In Linux, onfi_params
and jedec_params are unified as union.  It will be the right thing
to do.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:57 +09:00
Masahiro Yamada
ed3986ca30 bitops: collect BIT macros to include/linux/bitops.h
Same macros are defined in various places.  Collect them into
include/linux/bitops.h like Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:57 +09:00
Masahiro Yamada
50a327ded6 lib: libfdt: wrap scripts/dtc/libfdt/* where possible
lib/libfdt/ and scripts/dtc/libfdt have the same copies for the
followings 6 files:
  fdt.c fdt_addresses.c fdt_empty_tree.c fdt_overlay.c fdt_strerr.c
  fdt_sw.c

Make them a wrapper of scripts/dtc/libfdt/*.  This is exactly what
Linux does to sync libfdt.  In order to make is possible, import
<linux/libfdt.h> and <linux/libfdt_env.h> from Linux 4.14-rc5.

Unfortunately, U-Boot locally modified the following 3 files:
  fdt_ro.c fdt_wip.c fdt_rw.c

The fdt_region.c is U-Boot own file.

I did not touch them in order to avoid unpredictable impact.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-17 07:44:13 -05:00
Masahiro Yamada
1c4b453ad2 linux/types.h: add typedef of uintptr_t
Add this typedef in the same place as in Linux.  This is necessary
to refactor libfdt inclusion.

U-Boot also defines it in include/compiler.h.  Of course it should
not do that, but I do not want to open a can of worms.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-17 07:44:13 -05:00
Tom Rini
bb3d9ed3a9 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-10-27 21:59:10 -04:00
Ran Wang
d4c746c7b1 armv8: ls1088ardb: Enable USB command RDB qspi-boot
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27 08:47:06 -07:00
Masahiro Yamada
8b7f4b9cc1 mtd: remove MTDDEBUG() and CONFIG_MTD_DEBUG
All users of this macro have been converted.  Remove MTDDEBUG and
related CONFIG options.

ubifs_dbg_msg_key() is kept.  It is silent unless DEBUG is defined.

I am not touching scripts/config_whitelist.txt.  The deprecated options
will be dropped by the next resync.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 14:07:26 -04:00
Marek Behún
502af618ec linux/time.h: Remove dead code
Since
  rem = ((long) *tim_p) % SECSPERDAY;
the second while cycle
  while (rem >= SECSPERDAY)
is dead.

Reported-by: Coverity (CID: 167334)
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Jean-Jacques Hiblot
d753f942ec lzo: add a function to check the validity of the header
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Masahiro Yamada
84570a0c11 linux/kernel.h: import DIV_ROUND_{DOWN, UP}_ULL from Linux
These macros are useful to avoid link error on 32-bit systems.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-05 21:31:04 -04:00
Masahiro Yamada
6990e91f09 linux/bitfield.h: import <linux/bitfield.h> from Linux 4.13
Copied from Linux 4.13.

Commit log of 3e9b3112ec74 of Linux explains well why this header
is useful.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04 12:00:21 -04:00
Masahiro Yamada
c898cba41e dm: define dev_*() log functions in DM header
Many drivers had started to use dev_err, dev_info, etc. for log
functions.  Currently, we are relying on <linux/compat.h>, but I
guess the best home is <dm/device.h>, taking into account that
Linux defines them in <linux/device.h>.

For now, I am leaving the ones in <linux/compat.h> because lots of
Linux-originated code uses dev_*(), but the first argument is not
struct udevice, so we need to ignore the bogus argument.  More
efforts are needed to iron out the issues.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-04 12:00:20 -04:00
Masahiro Yamada
0a70fb4c1c bug.h: move runtime BUG/WARN macros into <linux/bug.h>
Collect runtime BUG/WARN into a self-contained header <linux/bug.h>
to make these macros easier to use.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04 12:00:20 -04:00
Masahiro Yamada
059a48096c bug.h: sync BUILD_BUG stuff with Linux 4.13
As commit 84b8bf6d5d ("bug.h: move BUILD_BUG_* defines to
include/linux/bug.h") noted, include/linux/bug.h was locally
modified for U-Boot because the name conflict of error() caused
build errors at that time.

Now error() is gone, so we can fully sync BUILD_BUG* with Linux.
These macros are just compile-time utilities.  Nothing depends on
platform code, so it should make sense to simply copy Linux's ones.

Please note Linux split BUILD_BUG stuff out into <linux/build_bug.h>
by commit bc6245e5efd7.  Let's follow it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-04 12:00:19 -04:00
Masahiro Yamada
b44b30260f printk: collect printk stuff into <linux/printk.h> with loglevel support
When we import code from Linux, with regular re-sync planned, we want
to use printk() and pr_*().  U-Boot does not support them in a clean
way.  So, people end up with local macros, or compat headers here and
there, then we occasionally see build errors of definition conflicts.

We have include/linux/compat.h, but putting all sorts of unrelated
things into a single header is just a temporal workaround.  Hence this
patch, to find the best home for all printk variants.  If you want to
use printk() and friends, please include <linux/printk.h>.  This header
is self-contained, and pulls in only a few headers.

When I was testing this clean-up, I noticed the image size exceeded
its platform limit on some boards.  This is because all pr_*() that
were previously defined as no-op in include/linux/mtd/mtd.h (unless
CONFIG_MTD_DEBUG is set), are now enabled.

To make such boards happy, this commit also implements CONFIG_LOGLEVEL.
The concept is similar to the kernel parameter "loglevel".  (Actually,
the Kconfig help message was taken from kernel-paremeter.txt of Linux)
Messages with a loglevel smaller than console loglevel will be printed.

The difference is the loglevel is build-time determined.  To save the
image size, lower priority pr_*() are compiled out.  I set the default
of CONFIG_LOGLEVEL to 6, i.e. pr_notice and higher priority messages
are compiled in.

I adjusted CONFIG_LOGLEVEL to avoid build error for some boards.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Add in SPL_LOGLEVEL that is the same as LOGLEVEL]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04 10:31:17 -04:00
Bin Meng
f51966bf7a usb: xhci: Honor endpoint's interval
USB endpoint reports the period between consecutive requests to send
or receive data as bInverval in its endpoint descriptor. So far this
is ignored by xHCI driver and the 'Interval' field in xHC's endpoint
context is always programmed to zero which means 1ms for low speed
or full speed , or 125us for high speed or super speed. We should
honor the interval by getting it from endpoint descriptor.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01 16:32:54 +02:00
Masahiro Yamada
6c06f8dc4a linux/io.h: import generic ioread* / iowrite* accessors from Linux
Some drivers in Linux (ex. drivers/mtd/nand/denali.c) use
ioread*/iowrite* accessors.  Import them to make drivers more
synced.  I copied code from include/asm-generic/io.h of Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-12 18:02:23 -04:00
Masahiro Yamada
b27af39935 dma: import linux/dma-direction.h to consolidate enum dma_data_direction
Import include/linux/dma-direction.h from Linux 4.13-rc7 and delete
duplicated definitions of enum dma_data_direction.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-09-12 18:02:23 -04:00
Yuiko Oshino
1c1e370033 net: Add mii_resolve_flowctrl_fdx()
Add an mii helper function to resolve flow control status per
IEEE 802.3-2005 table 28B-3.
This function was taken from the Linux source tree.

Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-14 12:47:32 -05:00
Philipp Tomsich
f1c6e1922e spl: dm: use CONFIG_IS_ENABLED to test for the DM option
Even though there's now a TPL_DM configuration option, the spl logic
still checks for SPL_DM and thus does not pick up the proper config
option.

This introduces the use of CONFIG_IS_ENABLED(DM) in spl.c to always
pick up the desired configuration option instead of having a
hard-coded check for the SPL variant.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 17:12:20 +02:00
Andy Shevchenko
daab59ac05 avr32: Retire AVR32 for good
AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06 16:17:19 -04:00
Masahiro Yamada
51855e8981 treewide: remove unneeded semicolons
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-16 10:11:38 -04:00
Simon Glass
a7d0021063 string: Add strcspn()
Add an implementation of strcspn() which returns the number of initial
characters that do not match any in a rejection list.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:12 -06:00
Simon Glass
6b45ba45fb string: Add strchrnul()
This functions works like strchr() but returns the end of the string if
the character is not found. Add an implementation of this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:12 -06:00
Simon Glass
fd7029029f Update WARN_ON() to return a value
In linux v4.9 this returns a value. This saves checking the warning
condition twice in some code.

Update the U-Boot version to do this also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:06 -06:00
Uri Mashiach
ef3f3b8100 arm: usb: dra7xx: xHCI registers based on USB port index
Modify the determination of the base address of xHCI registers of DRA7XX
targets.
Before the commit: by the target.
After the commit: by the USB port index.

Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2017-05-08 11:38:36 -04:00
Masahiro Yamada
a93fbf4a78 ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig
In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs.
Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this
naming.

Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim
down the arch/arm/Kconfig level.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-27 16:49:08 -04:00
Tom Rini
3c476d841d Merge git://git.denx.de/u-boot-fsl-qoriq 2017-04-18 11:36:06 -04:00
Masahiro Yamada
573a3811ed sysreset: psci: support system reset in a generic way with PSCI
If the system is running PSCI firmware, the System Reset function
(func ID: 0x80000009) is supposed to be handled by PSCI, that is,
the SoC/board specific reset implementation should be moved to PSCI.
U-Boot should call the PSCI service according to the arm-smccc
manner.

The arm-smccc is supported on ARMv7 or later.  Especially, ARMv8
generation SoCs are likely to run ARM Trusted Firmware BL31.  In
this case, U-Boot is a non-secure world boot loader, so it should
not be able to reset the system directly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18 10:29:19 -04:00
Masahiro Yamada
c54bcf6805 ARM: adjust arm-smccc code for use in U-Boot
Adjust ARM SMC Calling Convention code for U-Boot:
  - Replace the license block with SPDX
  - Change path to asm-offsets.h
  - Define UNWIND() as no-op
  - Add Kconfig entry
  - Add asm-offsets

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18 10:29:17 -04:00
Masahiro Yamada
c2da86f39e ARM: import arm-smccc code from Linux 4.11-rc6
Imports ARM SMC Calling Convention code from Linux 4.11-rc6.
The files have been copied as follows:

[Linux]                           [U-Boot]
arch/arm/kernel/smccc-call.S   -> arch/arm/cpu/armv7/smccc-call.S
arch/arm64/kernel/smccc-call.S -> arch/arm/cpu/armv8/smccc-call.S
arch/arm/include/asm/opcodes*  -> arch/arm/include/asm/opcodes*
include/linux/arm-smccc.h      -> include/linux/arm-smccc.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18 10:29:16 -04:00
York Sun
73fb583829 armv7: ls1021a: Drop macro CONFIG_LS102XA
Use CONFIG_ARCH_LS1021A instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17 09:03:30 -07:00
York Sun
c1303bfd7e armv8: ls1043a: Drop macro CONFIG_LS1043A
Use CONFIG_ARCH_LS1043A instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17 09:03:30 -07:00
York Sun
4a3ab19322 armv8: ls2080a: Drop macro CONFIG_LS2080A
Use CONFIG_ARCH_LS2080A instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17 09:03:30 -07:00
Peng Fan
0342e335ba lib: div64: sync with Linux
Sync with Linux commit ad0376eb1483b ("Merge tag 'edac_for_4.11_2'").

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Tom Rini <trini@konsulko.com>
2017-04-13 09:41:10 -04:00
Tom Rini
ea3310e8aa Blackfin: Remove
The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05 13:52:01 -04:00
Stefan Roese
e1b27d27a6 bitops.h: Include bitsperlong.h as needed for GENMASK_ULL
The macro GENMASK_ULL needs the BITS_PER_LONG_LONG macro which is
defined in the bitsperlong.h header. Lets include this header as
the upcoming A7k/8k support in the Marvell mvpp2 ethernet driver
uses this macro.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2017-03-29 07:39:32 +02:00
Tom Rini
0675f992db Merge git://git.denx.de/u-boot-fsl-qoriq 2017-01-19 12:22:23 -05:00
jerry.huang@nxp.com
97205eeab4 fsl/usb: enable usb feature for ls1046ardb
Enable usb feature for ls1046ardb

Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-18 09:23:24 -08:00
Masahiro Yamada
6569c0d325 iopoll: import include/linux/iopoll.h from Linux 4.9
This was imported from Linux 4.9 and adjusted for U-Boot.

 - Replace the license block with SPDX
 - Drop all *_atomic variants, which make no sense for U-Boot
 - Remove the sleep_us argument, which makes no sense for U-Boot

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-14 16:46:30 -05:00
Masahiro Yamada
ff90af6c73 typecheck: import include/linux/typecheck.h from Linux 4.9
Copied from Linux 4.9.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-14 16:46:29 -05:00
Masahiro Yamada
5bc516ed66 delay: collect {m, n, u}delay declarations to include/linux/delay.h
Currently, mdelay() and udelay() are declared in include/common.h,
while ndelay() in include/linux/compat.h.  It would be nice to
collect them into include/linux/delay.h like Linux.

While we are here, fix the ndelay() implementation; I used the
DIV_ROUND_UP() instead of (x)/1000 because it must wait *longer*
than the given period of time.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-14 16:46:28 -05:00
Nishanth Menon
042fdb7cab usb: xhci: Remove assumption of DWC instance based on DRA7 SoC type
Both AM57xx and DRA7xx share the same set of base addresses for DWC
controllers. The usage however differ with DWC2 instance used typically
in AM57xx evms while DWC1 instances used in DRA7x platforms.

Use TARGET_SOC config to differentiate so that CONFIG_AM57XX can be dropped.

Eventually, this needs to be dt-fied.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:10 -05:00
mario.six@gdsys.cc
ca388143ce linux/compat.h: Properly implement ndelay fallback
Commit c68c62 ("i2c: mvtwsi: Make delay times frequency-dependent")
extensively used the ndelay function with a calculated parameter
which is dependant on the configured frequency of the I2C bus. If
standard speed is employed, the parameter is usually 10000 (10000ns
period length for 100kHz frequency).

But, since the arm architecture does not implement a proper version of
ndelay, the fallback default from include/linux/compat.h is used,
which defines every ndelay as udelay(1). This causes problems for
slower speeds on arm, since the delay time is now 9us too short for
the desired frequency, which leads to random failures of the I2C
interface.

To remedy this, we implement a proper, parameter-aware ndelay fallback
for architectures that don't implement a real ndelay function.

Reported-By: Jason Brown <Jason.brown@apcon.com>
To: Tom Rini <trini@konsulko.com>
To: Heiko Schocher <hs@denx.de>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-11-28 15:10:34 -05:00
Jagan Teki
f790ca7c7d sf: Adopt flash table INFO macro from Linux
INFO macro make flash table entries more adjustable like
adding new flash_info attributes, update ID length bytes
and so on and more over it will sync to Linux way of defining
flash_info attributes.

- Add JEDEC_ID
- Add JEDEC_EXT macro
- Add JEDEC_MFR
- spi_flash_params => spi_flash_info
- params => info

Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-11-18 13:04:52 +05:30
Simon Glass
5023bd7a80 list: Add list_last_entry() to find the last entry
We have list_first_entry() but in some cases it is useful to find the last
item added to the list. Add a macro for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11 11:55:33 +08:00
Sriram Dash
4c043712e9 drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller
Currently the controller by default enables the Receive Detect feature in P3
mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably support receive
detection in P3 mode.
Enabling the USB3 controller to configure USB in P2 mode whenever the Receive
Detect feature is required.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2016-09-27 23:30:49 +02:00
Sriram Dash
e915716a5c drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests
This is required for better performance, and performs below tuning:
1. Enable burst length set, and define it as 4/8/16.
2. Set burst request limit to 16 requests.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
2016-09-27 23:30:16 +02:00
Tom Rini
cbe7706ab8 Merge git://git.denx.de/u-boot-fsl-qoriq
trini: Drop local memset() from
examples/standalone/mem_to_mem_idma2intr.c

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26 17:10:56 -04:00
York Sun
9533acf36c armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021A
Move this config to Kconfig option and clean up existing uses.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Calvin Johnson <calvin.johnson@nxp.com>
CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26 08:53:07 -07:00
Masahiro Yamada
259ede1132 errno.h: sync error macros with linux 4.8-rc7
For synchronization, import macros from
  - include/uapi/asm-generic/errno-base.h
  - include/uapi/asm-generic/errno.h
  - include/linux/errno.h

of Linux 4.8-rc7.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23 22:25:43 -04:00
Masahiro Yamada
4982f46420 Move ENOTSUPP defines to include/linux/errno.h
Collect a couple of duplicated defines into a single place.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23 22:25:43 -04:00
Masahiro Yamada
2c61551b62 Move error macros from <asm-generic/errno.h> to <linux/errno.h>
There are no files that include <asm-generic/errno.h> any more.
Move error macro defines to include/linux/errno.h and remove
include/asm-generic/errno.h.

Going forward, please include <linux/errno.h> when you need error
macros.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23 22:25:42 -04:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Masahiro Yamada
519d9424c3 Add <linux/errno.h> as a wrapper of <asm-generic/errno.h>
This will be used to consolidate errno.h variants.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23 17:53:57 -04:00
Masahiro Yamada
b5bf5cb3b3 treewide: use #include <...> to include public headers
We are supposed to use #include <...> to include headers in the
public include paths.  We should use #include "..." only for headers
in local directories.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23 17:53:56 -04:00
MengDongyang
b44566c4ce usb: xhci-rockchip: add rockchip dwc3 controller driver
This patch add support for rockchip dwc3 controller, which corresponding
to the two type-C port on rk3399 evb.
Only support usb2.0 currently for we have not enable the usb3.0 phy
driver and PD(fusb302) driver.

Signed-off-by: MengDongyang <daniel.meng@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-22 07:32:22 -06:00
Chris Zankel
de5e5cea02 xtensa: add support for the xtensa processor architecture [1/2]
The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core provided by Cadence.

This is the first part of the basic architecture port with changes to
common files. The 'arch/xtensa' directory, and boards and additional
drivers will be in separate commits.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-15 18:46:38 -04:00
Tom Rini
9c7a0a600b Merge git://git.denx.de/u-boot-fsl-qoriq 2016-07-26 17:34:28 -04:00
Rajesh Bhagat
9729dc9565 include: usb: Rename USB controller base address mapping
Remove Soc specific defines and use generic chasis specific defines
for USB controller base address mapping.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-26 09:01:04 -07:00
Steve Rae
59441ac3c1 mtd: fix compiler warnings
- add missing declaration
- update debug output format specifiers

Signed-off-by: Steve Rae <steve.rae@raedomain.com>
2016-07-24 20:36:29 -05:00
Boris Brezillon
c1fe6b5b5e mtd: nand: Increase the max OOB size
Some NANDs are now exposing 1664 OOB bytes per page. Adjust the
NAND_MAX_OOBSIZE value accordingly.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-07-24 20:36:28 -05:00
Brian Norris
42bd19ce6c mtd: nand: add common DT init code
These are already-documented common bindings for NAND chips. Let's
handle them in nand_base.

If NAND controller drivers need to act on this data before bringing up
the NAND chip (e.g., fill out ECC callback functions, change HW modes,
etc.), then they can do so between calling nand_scan_ident() and
nand_scan_tail().

The original commit has been slightly reworked to use the fdtdec_xxx()
helpers (instead of the of_xxxx() ones).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2016-07-24 20:36:28 -05:00
Ladislav Michl
22d6ac490e armv7: armv7: introduce set_gpmc_cs0
Allow boards to runtime detect flash type.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 14:46:11 -04:00
Ladislav Michl
0568dd0663 armv7: make gpmc_cfg const
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
[trini: Adapt am33xx, duovero, omap_zoom1]
Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-22 14:46:00 -04:00
Masahiro Yamada
9a387128e3 linux/io.h: add generic ioremap()/iounmap() defines
For most of architectures in U-Boot, virtual address is straight
mapped to physical address.  So, it makes sense to have generic
defines of ioremap and friends in <linux/io.h>.

All of them are just empty and will disappear at compile time, but
they will be helpful to implement drivers which are counterparts of
Linux ones.

I notice MIPS already has its own implementation, so I added a
Kconfig symbol CONFIG_HAVE_ARCH_IOREMAP which MIPS (and maybe
Sandbox as well) can select.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-07-14 18:22:26 -04:00
Masahiro Yamada
95ebc253e6 types.h: move and redefine resource_size_t
Currently, this is only defined in arch/arm/include/asm/types.h,
so move it to include/linux/types.h to make it available for all
architectures.

I defined it with phys_addr_t as Linux does.  I needed to surround
the define with #ifdef __KERNEL__ ... #endif to avoid build errors
in tools building.  (Host tools should not include <linux/types.h>
in the first place, but this is already messy in U-Boot...)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-14 18:22:24 -04:00
Andreas Bießmann
88a7fffe38 linux/compat.h: add dev_warn()
In order to prevent build errors for copied code from linux introduce
dev_warn().

Suggested-by: Scott Wood <oss@buserror.net>
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-12 23:49:38 +02:00
Robert P. J. Day
25bab53ab2 Remove unneeded remnants of bcopy().
Since bcopy() is no longer used, delete all remaining references to
it.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-06-06 13:39:18 -04:00
Tom Rini
715b3a9b24 Merge git://git.denx.de/u-boot-nand-flash 2016-06-04 08:49:47 -04:00
Scott Wood
ceee07b658 mtd: nand: Sync with Linux v4.6
Updates the NAND code to match Linux v4.6.  The previous sync was from
Linux v4.1 in commit d3963721d9.

Note that none of the individual NAND drivers tracked Linux closely
enough to be synced themselves, other than manually applying a few
cross-tree changes.

Signed-off-by: Scott Wood <oss@buserror.net>
Tested-by: Heiko Schocher <hs@denx.de>
2016-06-03 20:27:48 -05:00
Scott Wood
81c772521f mtd: nand: Add page argument to write_page() etc.
This change is part of the Linux 4.6 sync.  It is being done before the
main sync patch in order to make it easier to address the issue across
all NAND drivers (many/most of which do not closely track their Linux
counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
17cb4b8f32 mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
b616d9b0a7 nand: Embed mtd_info in struct nand_chip
nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.

This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip.  It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Scott Wood
ea7d1eec66 mtd: nand: Remove docg4 driver and palmtreo680 flashing tool
Commit ad4f54ea86 ("arm: Remove palmtreo680 board") removed the only
user of the docg4 driver and the palmtreo680 image flashing tool.  This
patch removes them.

Signed-off-by: Scott Wood <oss@buserror.net>
Cc: Mike Dunn <mikedunn@newsguy.com>
Cc: Simon Glass <sjg@chromium.org>
2016-06-03 20:27:48 -05:00
Prabhakar Kushwaha
b7f2bbfff6 armv8: fsl-layerscape: Add support of QorIQ LS1012A SoC
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.

This patch add support of LS1012A SoC along with
 - Update platform & DDR clock read logic as per SVR
 - Define MMDC controller register set.
 - Update LUT base address for PCIe
 - Avoid L3 platform cache compilation
 - Update USB address, errata
 - SerDes table
 - Added CSU IDs for SDHC2, SAI-1 to SAI-4

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Makarand Pawagi <makarand.pawagi@mindspeed.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:50 -07:00
Mugunthan V N
c0c62d9233 drivers: usb: common: add common code for usb drivers to use
Add common usb code which usb drivers makes use of it.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Vagrant Cascadian
eae4b2b67b Fix spelling of "occurred".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-02 18:37:09 -04:00
Andreas Bießmann
09c2b8f3e3 Change my mailaddress
I'll switch my mails to my own server, so drop all gmail references.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-05-02 18:37:09 -04:00
Stefan Roese
456ecd08ec lib/crc8: Add crc start value
To make the usage of this function more flexible, lets add the CRC start
value as parameter to this function. This way it can be used by other
functions requiring different start values than 0 as well.

For non-zero CRC start values to work, I've reworked the function a bit.
The new implementation is copied from the Linux version in
drivers/i2c/i2c-core.c / i2c_smbus_pec(). Which supports non-zero
CRC stating values.

I've double-checked that the results for zero starting values are
identical to the results from the original version of this function.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-11 20:48:26 -04:00
York Sun
3c1d218a1d armv8: LS2080A: Consolidate LS2080A and LS2085A
LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2016-04-06 10:26:46 -07:00
Tom Rini
9b2c282b34 compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6
Copy these from Linux v4.5-rc6 tag.

This is needed so that we can keep up with newer gcc versions.  Note
that we don't have the uapi/ hierarchy from the kernel so continue to
use <linux/types.h>

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-02-29 11:43:24 -05:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Masahiro Yamada
84b8bf6d5d bug.h: move BUILD_BUG_* defines to include/linux/bug.h
BUILD_BUG_* macros have been defined in several headers.  It would
be nice to collect them in include/linux/bug.h like Linux.

This commit is cherry-picking useful macros from include/linux/bug.h
of Linux 4.4.

I did not import BUILD_BUG_ON_MSG() because it would not work if it
is used with include/common.h in U-Boot.  I'd like to postpone it
until the root cause (the "error()" macro in include/common.h causes
the name conflict with "__attribute__((error()))") is fixed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-25 10:39:59 -05:00
Sergey Temerkhanov
284ca9cd6e armv8: Add psci.h from the Linux kernel
This commit adds the psci.h header file from Linux kernel
which contains definitions related to the PSCI interface provided
by firmware

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
2016-01-19 22:25:37 +00:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
York Sun
2e680f92b8 Revert "include/linux: move typdef for uintptr_t"
This reverts commit e8f954a756, which
causes compiling errors on 32-bit hosts.

Acked-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2015-12-16 07:11:15 -05:00
Aneesh Bansal
e8f954a756 include/linux: move typdef for uintptr_t
uintptr_t which is a typdef for unsigned long is needed for creating
pointers (32 or 64 bit depending on Core) from 32 bit variables
storing the address.
If a 32 bit variable (u32) is typecasted to a pointer (void *),
compiler gives a warning in case size of pointer on the core is 64 bit.

The typdef has been moved from include/compiler.h to include/linux/types.h

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-15 08:57:34 +08:00
Marek Vasut
6af4e2782d usb: xhci: zynqmp: Removing unused function usb_phy_reset
This patch removes unsued function usb_phy_reset, rather common function
dwc3_phy_reset is used.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-07 00:15:00 +01:00
Gong Qianyu
7023100971 armv8/ls1043ardb: add USB support
Add support for the third USB controller for LS1043A.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:11:11 -08:00
Prabhakar Kushwaha
06b5301043 armv8: ls2085a: Add support of LS2085A SoC
Freescale's LS2085A is a another personality of LS2080A SoC with
support of AIOP and DP-DDR.
This Patch adds support of LS2085A Personality.

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Updated MAINTAINERS files
           Dropped #ifdef in cpu.h
           Add CONFIG_SYS_NS16550=y in defconfig]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:10:47 -08:00
Prabhakar Kushwaha
449372148f armv8: LS2080A: Rename LS2085A to reflect LS2080A
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 08:53:04 -08:00
Simon Glass
d8a26f0300 usb: sandbox: Add a USB emulation driver
Add a simple USB keyboard driver for sandbox. It provides a function to
'load' it with input data, which it will then stream through to the normal
U-Boot input subsystem. When the input data is exhausted, the keyboard stops
providing data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:52 -07:00