Commit graph

15745 commits

Author SHA1 Message Date
Tom Rini
edcbd6e388 omap3: emif4: More clearly hard-code cs0 size
We have a single platform that is both in the OMAP3 family of parts, but
has an EMIF4 memory controller.  Currently we hard-code the size of
chip select 0.  Make this more clear by putting the value in the
function rather than a CONFIG option.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:34 -04:00
Tom Rini
95cc3efcc1 arm: Remove strongarm support
There are no platforms using this architecture anymore, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:33 -04:00
Tom Rini
9ff4ce8abc nman external-symbol improvements
Driver model memory-usage reporting
 patman test-reporting improvements
 Add bloblist design goals
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmK7BHwRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrealpwgAlCLCdEiSncV0t+Q9zvdtAQStvZdjD6CW
 VhpCS38pWUA0ckKYq/gmmlE2nW6i7pb4RdiOkpOhKdwFQI7SwbF2GdcU2yv08PMm
 qWHTRDaTm0SiGXUU462+A1Bj/aXPH86uEE9bCYu1FYtRrEtNf6aAeWF3pqNJv4fy
 CFB9OYyAfMEdywCtW2dCjS4y1FiI95Y2Jvg7lPGLVayHDyuavLSMKC8QEsVS4mR0
 91nNLhs6agko/H2i0QXle1lLjkvTIH3VR6dn/CMVjD+goJdDCk7rltHRXHejGun4
 n+a1W3EVv2sSQLwQJ0Kw5e2eBKdlM6Lpzhc0b0iJ2jKzBZeLXS+qBg==
 =2LZO
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-28jun22' of https://source.denx.de/u-boot/custodians/u-boot-dm into next

nman external-symbol improvements
Driver model memory-usage reporting
patman test-reporting improvements
Add bloblist design goals
2022-07-08 14:39:07 -04:00
Tom Rini
bb20a105e9 Convert CONFIG_SYS_BOOT_RAMDISK_HIGH to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOT_RAMDISK_HIGH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
a457ebd786 arm: Remove PXA architecture support
With the last platform for this architecture removed, remove the rest of
the architecture support as well.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-07-07 09:29:08 -04:00
Tom Rini
d9d4978143 thunerx_88xx: Clean up config slightly.
We don't use CONFIG_SYS_64BIT anywhere and can use
CONFIG_TARGET_THUNDERX_88XX to build the device trees.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
2bb9d7c65a Convert CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
   CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
   CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
f1c6dfa426 layerscape: Remove some unused CONFIG symbols
All of these symbols are not referenced anywhere else in the code, so
remove them.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
cd6a45a41f Convert CONFIG_USB_OHCI_NEW et al to Kconfig
This converts the following to Kconfig:
    CONFIG_SYS_OHCI_SWAP_REG_ACCESS
    CONFIG_SYS_USB_OHCI_CPU_INIT
    CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
    CONFIG_SYS_USB_OHCI_SLOT_NAME
    CONFIG_USB_ATMEL
    CONFIG_USB_ATMEL_CLK_SEL_PLLB
    CONFIG_USB_ATMEL_CLK_SEL_UPLL
    CONFIG_USB_OHCI_LPC32XX
    CONFIG_USB_OHCI_NEW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
b340199f82 spl: Ensure all SPL symbols in Kconfig have some SPL dependency
Tighten up symbol dependencies in a number of places.  Ensure that a SPL
specific option has at least a direct dependency on SPL.  In places
where it's clear that we depend on something more specific, use that
dependency instead.  This means in a very small number of places we can
drop redundant dependencies.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Joel Stanley
3045d61c1c aspeed/spl: Remove OVERLAY from linker script
The generic arm linker script contains this section:

   .bss __rel_dyn_start (OVERLAY) : {
       ...
   }

The (OVERLAY) syntax in the description causes the .bss section to be
included in the NOR area of the image:

 $ objdump -t -j .bss spl/u-boot-spl
  SYMBOL TABLE:
  0000c61c l    d  .bss	00000000 .bss
  0000c640 l     O .bss	00000040 __value.0
  0000c68c g     O .bss	00000000 __bss_end
  0000c61c g     O .bss	00000000 __bss_start
  0000c680 g     O .bss	0000000c stdio_devices

This is what the custom linker script tries to avoid, as the NOR area is
read-only.

Remove the OVERLAY syntax to fix the BSS location:

 $ objdump -t -j .bss spl/u-boot-spl
  SYMBOL TABLE:
  83000000 l    d  .bss	00000000 .bss
  83000000 l     O .bss	00000040 __value.0
  0000c61c g     O .bss	00000000 __image_copy_end
  8300004c g     O .bss	00000000 __bss_end
  83000000 g     O .bss	00000000 __bss_start
  83000040 g     O .bss	0000000c stdio_devices

This restores the state of the linker script before the patch that fixed
the linker lists issue.

Fixes: f6810b749f ("aspeed/ast2600: Fix SPL linker script")
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:32:00 -04:00
Joel Stanley
0b2a749bc6 ARM: dts: ast2500: Update SDHCI nodes
Match the description used by the Linux kernel, except use scu instead
of syscon as the phandle.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:31:29 -04:00
Joel Stanley
dedf8e3186 ARM: dts: ast2600: Update SDHCI nodes
Match the description used by the Linux kernel, except use scu instead
of syscon as the phandle.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:31:29 -04:00
Joel Stanley
b45768ebfe ARM: dts: ast2600-evb: Add I2C devices
The EVB has an EEPROM and ADT8490 temp sensor/fan controller on bus 7,
and a LM75 temp sensor on bus 8.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:30:51 -04:00
Joel Stanley
5ff466fade ARM: dts: ast2500-evb: Add I2C devices
The EVB has an EEPROM on bus 3 and a LM75 temp sensor on bus 7. Enable
those busses we can test the I2C driver.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2022-07-06 14:30:51 -04:00
Joel Stanley
3ad1d85d3c ARM: dts: ast2600-evb: Remove redundant pinctrl
Now that these are in the dtsi we don't need them in the EVB device
tree.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:30:51 -04:00
Joel Stanley
fc28e02404 ARM: dts: ast2600: Disable I2C nodes by default
Allow boards to enable the buses they use.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2022-07-06 14:30:51 -04:00
Joel Stanley
a87273bc40 ARM: dts: ast2600: Add I2C reset properties
The same as the upstream Linux device tree, each i2c bus has a property
specifying the reset line.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2022-07-06 14:30:51 -04:00
Eddie James
8c3019216e ARM: dts: ast2600: Add I2C pinctrl
Set the pinctrl groups for each I2C bus. These are essential to
I2C operating correctly.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:30:51 -04:00
Georgi Vlaev
362b0d2e6e arm: dts: k3-am625-*: Mark memory with u-boot,dm-spl
Mark the memory node with u-boot,dm-spl so we can use it
from early SPL on both R5 and A53.

Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-06 14:30:08 -04:00
Georgi Vlaev
a04bbb83b4 arm: mach-k3: common: Use ddr_init in spl_enable_dcache
The spl_enable_dcache() function calls dram_init_banksize()
to get the total memory size. Normally the dram_init_banksize()
setups the memory banks, while the total size is reported
by ddr_init(). This worked so far for K3 since we set the
gd->ram_size in dram_init_banksize() as well.

Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-06 14:30:08 -04:00
Vaishnav Achath
c16b4f14a3 arm: k3: j721e: add dynamic sf bus override support for j721e
implement overrides for spl_spi_boot_bus() and spl_spi_boot_cs()
lookup functions according to bootmode selection, so as to support
both QSPI and OSPI boot using the same build.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2022-07-06 14:30:08 -04:00
Tom Rini
432243cee1 Convert CONFIG_KIRKWOOD_PCIE_INIT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_KIRKWOOD_EGIGA_INIT
   CONFIG_KIRKWOOD_PCIE_INIT
   CONFIG_KIRKWOOD_RGMII_PAD_1V8
   CONFIG_KM_DISABLE_PCIE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:05:00 -04:00
Tom Rini
52aaa1840d nxp: config_fsl_chain_trust.h: Clean up and remove unused portions
The way that secure boot is implemented today on NXP ARM platforms does
not reuse the elements found in include/config_fsl_chain_trust.h to
construct CONFIG_SECBOOT but instead board header files have their
environment setup as needed and then fsl_setenv_chain_of_trust() will
set secureboot in the environment.  Remove a large number of unused
defines here.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:01 -04:00
Tom Rini
5aad0a14ba fsl_validate: Migrate SPL_UBOOT_KEY_HASH to Kconfig
Move setting of SPL_UBOOT_KEY_HASH to a non-NULL value to Kconfig.  As
part of this, change fsl_secboot_validate(...) to check that it is
passed a non-empty string, rather than non-NULL.

Cc: Peng Fan <peng.fan@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:01 -04:00
Tom Rini
540b73a7be arch/Kconfig.nxp: Re-organize slightly
Make all of the CHAIN_OF_TRUST options be under a single menu and add a
comment for the rest, so the resulting config file reads more clearly.
Remove duplicate CHAIN_OF_TRUST options from
board/congatec/common/Kconfig.  Remove duplicate NXP_ESBC config
questions and move to arch/Kconfig.nxp.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:01 -04:00
Tom Rini
601483ffd5 Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_KEY_REVOCATION
   CONFIG_SYS_FSL_SFP_BE
   CONFIG_SYS_FSL_SFP_LE
   CONFIG_SYS_FSL_SFP_VER_3_0
   CONFIG_SYS_FSL_SFP_VER_3_2
   CONFIG_SYS_FSL_SFP_VER_3_4
   CONFIG_SYS_FSL_SRK_LE

This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for
when CHAIN_OF_TRUST is enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:00 -04:00
Tom Rini
c9f85187e2 Convert CONFIG_SYS_FSL_SEC_MON et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FSL_SEC_MON
   CONFIG_SYS_FSL_SEC_MON_BE
   CONFIG_SYS_FSL_SEC_MON_LE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:00 -04:00
Tom Rini
2b2817b5c8 Convert CONFIG_ESBC_HDR_LS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ESBC_HDR_LS
   CONFIG_ESBC_ADDR_64BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:02 -04:00
Tom Rini
1f7e2fc324 Convert CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR to Kconfig
This converts the following to Kconfig:
   CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
de0a732915 Rename CONFIG_PWM to CONFIG_PWM_S5P and move to Kconfig
We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to
Kconfig.  Given the usage of CONFIG_PWM_NX, we have that select this new
symbol.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05 17:03:01 -04:00
Tom Rini
284c1a9b4b First set of u-boot-at91 features for the 2022.10 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmK9nEUcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyEu0B/4v1EQOMBL+VXns8Ipo
 Xeq+RDUX/24XcB5s6sTcNlWzvYuX6Z7DCGJ0loK5JxelrOy+YNkRbTRMom1eW9Kn
 9dmKa0bcO7auJEww3Nln1IFyx+FXQFGR1V3g1U4535l8b7urTioIK0MUSrG/GLpe
 Rlbh31GAYtrGvl06W1F7mwhg7/0AT8IhUFaY9G7s7gKA5muGQQ7ED4nKVoZPeTAl
 lrQ/Ecym1ND7aOhd/vuEBtgoGxDWzwf8piT8qykJluJKzBV1Hic0RXCNBmtrTORz
 b1GOOpRUgcnTv9U8j4PRyYGKDnmS2OmV2AwL8+V9UJfJgQrkcRlbgpCysIPmMBzo
 YPRt
 =D79P
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2022.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2022.10 cycle:

This feature set includes mostly fixes and alignments: DT alignment with
Linux for sama7g5, removal of invalid eeprom compatibles, removal of
extra debug_uart_init calls for all at91 boards, support for pio4 driver
pioE bank, and other minor fixes and enhancements for sam9x60 and
sama5d2_icp boards.
2022-06-30 15:21:52 -04:00
Tom Rini
c5e7003aa8 Versal QSPI/OSPI changes for v2022.10
- Add new flash types
 - Add cadence ospi driver for Xilinx Versal
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYr2hGQAKCRDKSWXLKUoM
 IabDAJ9oyJ+Z84pDMbegg3uiFp2hQZfx+wCfaX1PXklNCaHIcnnq3ZZAMV2SYds=
 =lU1M
 -----END PGP SIGNATURE-----

Merge tag 'versal-qspi-for-v2022.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Versal QSPI/OSPI changes for v2022.10

- Add new flash types
- Add cadence ospi driver for Xilinx Versal
2022-06-30 09:32:15 -04:00
Mihai Sain
c1cadac793 gpio: atmel_pio4: add support for PIO_PORTE
Add support for gpio PORT E, which is available on e.g. sama7g5 SoC.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2022-06-30 15:49:00 +03:00
T Karthik Reddy
248fe9f302 spi: cadence_qspi: Enable apb linear mode for apb read & write operations
On versal platform, enable apb linear mode for apb read and write
execute operations amd disable it when using dma reads. This is done by
xilinx_pm_request() secure calls when CONFIG_ZYNQMP_FIRMWARE is enabled,
else we use direct raw reads and writes in case of mini U-Boot.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220512100535.16364-5-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29 16:00:31 +02:00
T Karthik Reddy
bf8dae5fcf spi: cadence-qspi: reset qspi flash for versal platform
When flash operated at non default mode like DDR, flash need to be reset
to operate in SDR mode to read flash ids by spi-nor framework. Reset the
flash to the default state before using the flash. This reset is handled
by a gpio driver, in case of mini U-Boot as gpio driver is disabled, we
do raw read and write access by the registers.
Versal platform utilizes spi calibration for read delay programming, so
incase by default read delay property is set in DT. We make sure not to
use read delay from DT by overwriting read_delay with -1.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220512100535.16364-4-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29 16:00:31 +02:00
Tom Rini
3371eddaa1 Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_MAX_CONTROLLER_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
3a21d45d33 siemens: Move CONFIG_FACTORYSET to Kconfig
Introduce board/siemens/common/Kconfig and have it hold FACTORYSET to
start with.  Use select for this on the boards that need it.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:04:38 -04:00
Tom Rini
24ec3dea4b arm: samsung: Migrate a number of symbols to Kconfig
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than
  CONFIG_EXYNOS[45]
- In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX
- Migrate specific SoC CONFIG values to Kconfig
- Use CONFIG_TARGET_x rather than CONFIG_x
- Migrate other CONFIG_EXYNOS_x symbols to Kconfig
- Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE
- Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest
  of U-Boot usage.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:04:37 -04:00
Tom Rini
1e03e03d03 arm: exynos: Remove old pwm backlight driver
Remove the unused older exynos pwm backlight driver.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28 17:03:32 -04:00
Tom Rini
dc2d27ae72 arm: samsung: Remove dead LCD code
Since bb5930d5c9 ("exynos: video: Convert several boards to driver
model for video") there have been no callers of any of the exynos_lcd_*
family of functions.  Remove these from the boards, and then remove
unused logo and related code as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-06-28 17:03:32 -04:00
Tom Rini
aca1f6789a Convert CONFIG_LBA48 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LBA48
   CONFIG_SYS_64BIT_LBA

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:32 -04:00
Tom Rini
5858b90f50 spl: Move SPL_LDSCRIPT defaults to one place
We want to keep all of the default values for SPL_LDSCRIPT in the same
place both for overall clarity as well as not polluting unrelated config
files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
7ef53a3dc6 Convert CONFIG_TEGRA_GPU to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_GPU

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
093044735f usb: ehci-fsl: Remove non-DM code
The deadline for DM_USB migration has passed and all users have been
migrated.  Remove now unused code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
d6e9efa6b2 Convert CONFIG_EFLASH_PROTSECTORS to Kconfig
This converts the following to Kconfig:
   CONFIG_EFLASH_PROTSECTORS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:30 -04:00
Joel Stanley
f6810b749f aspeed/ast2600: Fix SPL linker script
The commit 99e2fbcb69 ("linker_lists: Rename sections to remove .
prefix") changed the name of the linker list sections. As the Aspeed SPL
linker wasn't in the tree yet, it missed the change.

This updates the SPL linker to match arch/arm/cpu/u-boot-spl.lds which
Aspeed was copied from.

Fixes: 442a69c143 ("configs: ast2600: Move SPL bss section to DRAM space")
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-06-28 09:40:03 -04:00
Eugen Hristev
5ae89b3cfe ARM: dts: at91: sam9x60ek: fix eeprom compatible
The memory on this board is microchip 24aa025e48 which is compatible with
at24c02 with a page size of 16.
Fix the compatible accordingly.

Reported-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-06-28 10:09:45 +03:00
Eugen Hristev
0d60a93053 ARM: dts: at91: replace microchip, 24aa02e48 with atmel, at24c02
microchip,24aa025e48 does not exist in the bindings of this driver.
It can be replaced with atmel,at24c02 which is a standard compatible
and the memory is compatible with this one, depending on the page size.
microchip 24aa02e48 has a page size of 8, while 24aa025e48 has a page
size of 16 bytes.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-06-28 10:09:45 +03:00
Eugen Hristev
d4d3c33393 ARM: dts: at91: sama7g5/sama7g5ek: sync with kernel at91 5.19
Sync with at91 maintainer tree for-5.19 branch.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-06-28 10:09:45 +03:00