Commit graph

60 commits

Author SHA1 Message Date
Fabio Estevam
30ba8eb0d3 mx6sabresd: Remove unneeded enable_lvds() function
enable_lvds() function only set bits IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT and
IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT, but these bits were already set
previously inside setup_display().

We can safely remove enable_lvds() then.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-03 19:14:43 +02:00
Fabio Estevam
779594d335 mx6sabresd: Use VESA 1024x768 timings
VESA 1024x768 results in much more accurate timings.

Based on the patch from Soeren Moch for the tbs2910 board.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-03-25 14:05:24 +01:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Peng Fan
fb0d042814 imx: mx6: implement board_mmc_get_env_dev
Implement board_mmc_get_env_dev for the boards.

Following is examples:
SD1/SD2/SD3: return devno;
SD2/SD3: return devno - 1;
SD2/SD4: if (devno == 2), return dev - 2; return dev - 1;

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-02-04 10:13:53 +01:00
Ye Li
214c3f0f99 imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure
The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card.
Fixed the value to correct one.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-02-02 21:22:04 +01:00
Fabio Estevam
c5f18a0b69 MAINTAINERS/mailmap: Update my email address
Update my email address to the NXP account.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-01-11 11:22:43 -05:00
Fabio Estevam
a307760ab4 mx6sabresd: Simplify the Ethernet PHY configuration
As per the AR8031 datasheet:

"For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset
1ms requirement is satisfied."

So do as suggested and also add a 100us delay after deasserting the
reset line to guarantee that the PHY ID can be read correctly and the
Atheros 8031 PHY driver can be loaded automatically.

This results in a simpler code.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-07 17:47:12 +01:00
Fabio Estevam
26fbe9e531 mx6sabresd: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-11-12 17:26:30 +01:00
Peng Fan
e469719c8b imx: mx6sabresd: add i.MX6DQP Sabresd support
Add i.MX6DQP-Sabresd board support:
1. set fdt_file according to board_rev which is set at runtime.
2. Add mx6dqp_ddr_ioregs and calibration value for this board.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2015-10-30 15:15:36 +01:00
Peng Fan
f20562e4c4 mx6: remove SYS_SOC from board Kconfig
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-09-13 10:37:29 +02:00
Peng Fan
f2ff834365 imx: mx6: ddr init MMDC according to ddr_type
To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg
to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper.
The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg
when ddr_type is for DDR3. Later we can use ddr_type to initialize
MMDC for LPDDR2.

Initialize ddr_type for different boards which enable SPL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-09-02 15:34:12 +02:00
Peng Fan
e6fc8995d6 imx: mx6sabresd/sabreauto runtime setting fdt_file
Detect the SOC and board variant at runtime and change the dtb name,
but not hardcoding the fdt_file env variable.

Take the following patch as a reference.
Íd58699b157df75f1aa0b363ea9c21add21a0c
"mx6cuboxi: Load the correct 'fdtfile' variable"

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-08-02 10:47:05 +02:00
Fabio Estevam
e4b984d75e mx6sabresd: Use 'int' for return values
The variable 'ret' is used to store the value returned by pfuze_mode_init(),
so it should of type 'int' instead of 'unsigned int' in order to correctly
handle negative numbers.

Fix the variable type.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26 12:12:04 +02:00
Fabio Estevam
cba4c255fc mx6sabresd: Remove uneeded ifdef
RTT_NOM_120OHM is not defined, so remove its ifdef.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-04-22 16:02:46 +02:00
Fabio Estevam
407be42d73 mx6sabresd: Fix SPL memory description
mx6sabresd has four MT41K128M16JT-125 chips. Each memory has 16-bit bus
and 2GiB, so fix the width and density fields accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-04-22 16:02:46 +02:00
Peng Fan
258c98f8d3 imx:mx6 set normal APS and standby PFM mode
To normal mode, use APS switching mode.
To standy mode, use PFM switching mode.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-02-11 12:38:48 +01:00
Peng Fan
5a3d63c5cd imx:mx6sabresd add board level support for usb
Add pinmux settings, implement board_ehci_hcd_init and board_ehci_power

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2014-12-19 15:32:13 +01:00
Ye.Li
f0fabb7945 imx: mx6sabresd: Use the pfuze common init function
Modify the pfuze init for mx6sabresd to use the shared
"pfuze_common_init" function. And move this initialization to
power_init_board.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-11-20 10:51:45 +01:00
Fabio Estevam
ae80eecceb mx6sabresd: Access SRC_SBMR1 register via structure
In U-boot it is preferred to access the register via structure pointer, so
convert it such style.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:30:21 +01:00
Fabio Estevam
31b9023d84 mx6sabresd: Add mx6sabresd_spl_defconfig to MAINTAINERS entry
Let's add mx6sabresd_spl_defconfig entry into MAINTAINERS, so that we avoid
getting a warning that the mx6sabresd_spl is not maintained.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:30:20 +01:00
Fabio Estevam
c9c41d0e2b mx6sabresd: State that only mx6q is supported in SPL
Make clear that current SPL code only supports the mx6q variant.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:30:20 +01:00
Fabio Estevam
53b7f18044 mx6: Use a common SPL configuration file
Many boards use a minimal .cfg file in the SPL case.

Introduce spl_sd.cfg so that we can reuse it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-11-20 10:30:18 +01:00
Fabio Estevam
6e9b6bb5a0 mx6sabresd: Move the DCD settings to spl code
mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR.

Move the configuration to the spl code.

CCM_CCOSR setting is no longer required to get audio functionality in the
kernel, so remove such setting.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:13:54 +01:00
Fabio Estevam
3302c275b3 mx6sabresd: Staticize when possible
Annotate 'static' when appropriate for the variables used locally.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-13 18:06:18 +01:00
Fabio Estevam
952fdc4e83 mx6sabresd: Fix error handling in board_mmc_init()
When an invalid USDHC port is passed we should return -EINVAL instead of 0.

Also, return the error immediately on fsl_esdhc_initialize() failure.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-13 18:06:13 +01:00
John Tobias
75f2ba4220 imx6: SPL support for iMX6 SabreSD
This patch will enable the support for SPL on iMX6 SabreSD.
It tested on SD2 and SD3 mmc port (Switch 1 or 2 of SW6)

Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-11-13 16:25:10 +01:00
John Tobias
340d1d3a0e imx6: add data configuration file for SPL
It's a trim version of mx6q_4x_mt41j128.cfg. It just removed
the related settings for DDR

Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
2014-11-13 16:23:55 +01:00
Tom Rini
625509ab0e Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-11-05 12:48:09 -05:00
Fabio Estevam
ca9d817ab5 mx6sabresd: Add Seiko WVGA panel support
Add support for the 4.3'' Seiko WVGA parallel display.

In order to direct the splash screen to the Seiko display:

=> setenv panel SEIKO-WVGA
=> save
=> reset

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-10-30 10:11:39 +01:00
Georges Savoundararadj
2e07c249a6 kconfig: arm: introduce symbol for ARM CPUs
This commit introduces a Kconfig symbol for each ARM CPU:
CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
for CPU_ARM1176 and CPU_V7.

For each target, the corresponding CPU is selected and the definition of
SYS_CPU in the corresponding Kconfig file is removed.

Also, it removes redundant "string" type in some Kconfig files.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29 09:02:09 -04:00
Albert ARIBAUD
4b19b7448e Merge remote-tracking branch 'u-boot-imx/master'
The single file conflict below is actually trivial.

Conflicts:
	board/boundary/nitrogen6x/nitrogen6x.c
2014-10-08 21:20:49 +02:00
Nikita Kiryanov
155fa9af95 spi: mxc: fix sf probe when using mxc_spi
MXC SPI driver has a feature whereas a GPIO line can be used to force CS high
across multiple transactions. This is set up by embedding the GPIO information
in the CS value:

cs = (cs | gpio << 8)

This merge of cs and gpio data into one value breaks the sf probe command:
if the use of gpio is required, invoking "sf probe <cs>" will not work, because
the CS argument doesn't have the GPIO information in it. Instead, the user must
use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force
cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must
type "sf probe 15872".

This is inconsistent with the description of the sf probe command, and forces
the user to be aware of implementaiton details.

Fix this by introducing a new board function: board_spi_cs_gpio(), which will
accept a naked CS value, and provide the driver with the relevant GPIO, if one
is necessary.

Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Eric Benard <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-24 17:25:39 +05:30
Nitin Garg
7972913512 imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board
Provide cgtqmx6eval board its own variant of ddr
setup config file. Move board/freescale/imx/ddr/
mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/
as this is was designed for the mx6sabresd board.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-09-22 16:09:56 +02:00
Tom Rini
e38b15b061 Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-09-17 18:01:04 -04:00
Masahiro Yamada
461be2f96e kconfig: remove redundant "string" type in arch and board Kconfigs
Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.

We can delete the ones in arch and board Kconfig files.

This commit can be easily reproduced by the following command:

find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
}
'

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-13 16:43:55 -04:00
Fabio Estevam
f4fb5ef045 mx6dlsabresd: Use its own DCD table
Currently mx6dlsabresd shares the same DCD settings with the nitrogen board.

Provide a DCD configuration file specific to mx6dlsabresd with the settings
recommended by the Freescale hardware team.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-09-09 16:55:22 +02:00
Stefano Babic
e82abaeb7f Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	boards.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-08-11 10:21:03 +02:00
Fabio Estevam
676ac24e07 pmic: pmic_pfuze100: Use a shorter name for PMIC name
It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already
know it is a PMIC.

Call it simply 'PFUZE100' instead.

Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-08-08 10:29:41 +02:00
Masahiro Yamada
93d4334f7f Add board MAINTAINERS files
We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.

The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.

After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.

TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:06 -04:00
Masahiro Yamada
dd84058d24 kconfig: add board Kconfig and defconfig files
This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:01 -04:00
Fabio Estevam
66ca09fc41 mx6sabred: Add PFUZE100 PMIC support
mx6sabresd boards have a PFUZE100 PMIC connected to I2C2 bus.

Add support for it

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-05-28 17:35:39 +02:00
Eric Benard
d84187ac75 mx6sabresd: use common detect_hdmi
Signed-off-by: Eric Bénard <eric@eukrea.com>
2014-04-15 12:23:57 +02:00
Eric Benard
053b795e30 mx6sabresd: use common board_video_skip
Signed-off-by: Eric Bénard <eric@eukrea.com>
2014-04-15 12:23:56 +02:00
Marek Vasut
e919aa23ef ARM: mx6: Add PCIe on SabreSDP
Add support for PCIe on MX6 SabreSDP board and enable the support
in the config file.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Liu Ying <Ying.Liu@freescale.com>
2014-03-31 18:28:50 +02:00
Fabio Estevam
92c707a580 mx6sabresd: Return from cpu_eth_init() directly
There is no need to print an error message when cpu_eth_init() fails because
net/eth.c already prints it.

In order to simplify the code, just return the value from cpu_eth_init(bis)
directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-01-13 11:52:27 +01:00
Fabio Estevam
119e990986 mx6sabresd: Fix LVDS width and color format
mx6sabresd boards have a 18-bit LVDS data width and the correct color format
is RGB666.

Suggested-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-12-17 18:38:42 +01:00
Fabio Estevam
be4ab3dd05 mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
HSYNC, VSYNC and DISP_CLK are very useful display signals for debugging.

Configure them as active pins.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-12-17 18:38:42 +01:00
Liu Ying
1230743731 MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
Align with the context to use readl() to read the CCM_CCGR3
register with memory barrier instead of __raw_readl().

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-12-17 18:38:42 +01:00
Fabio Estevam
8bfa9c692e mx6sabresd: Add SPI NOR support
mx6sabre board has a m25p32 SPI NOR connected to ECSPI1 port.

Add support for it.

This patch allows the SPI NOR flash to be succesfully detected:

=> sf probe
SF: Detected M25P32 with page size 256 Bytes, erase size 64 KiB, total 4 MiB

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-11-28 08:28:53 +01:00
Fabio Estevam
b48e3b0410 mx6sabresd: Fix wrong colors in LVDS splash
Currently HDMI splash screen is selected by default on mx6sabresd boards.

As LVDS is also enabled, this causes incorrect colors to be displayed im the
LVDS panel.

Fix this by selecting the LVDS panel as the default splash output and only keep
HDMI or LVDS turned on at the same time.

Acked-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-11-28 08:28:53 +01:00