At present we get multiple lines of output when a board has no MAINTAINERS
entry:
WARNING: no status info for 'bananapi-m2-pro'
WARNING: no maintainers for 'bananapi-m2-pro'
Suppress the 'status' one since it is implied by the other.
Signed-off-by: Simon Glass <sjg@chromium.org>
This doesn't work as intended. Instead it scans every defconfig file
in the source tree.
Fix it and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
We generally expected exactly one of these. Add a check for it.
Note: This warning is not displayed by default. An option will be added
to enable it.
Signed-off-by: Simon Glass <sjg@chromium.org>
The TARGET_xxx options are special in that they refer to a single target.
Exactly one should be enabled for each target, corresponding to a
defconfig file.
Detect configs which result in two TARGET_xxx options being set. For
example, at present, TARGET_POLEG and TARET_POLEG_EVB are enabled for the
same board.
Note: This warning is not displayed by default. An option will be added
to enable it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the assert to the top of the function and provide an explicit
variables for the target name and base name.
Signed-off-by: Simon Glass <sjg@chromium.org>
Other than the top-level MAINTAINERS file, all maintainer entries should
actually reference a target. Add a warning to detect those that do not.
Signed-off-by: Simon Glass <sjg@chromium.org>
Create a new function which has the non-UI parts of ensure_board_list().
Add some tests for everything except the N: tag.
While we are here, fix the confusing usage of fname inside a loops that
also uses fname.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a test for this code. It requires some defconfig files and a test
Kconfig to work with, so copy these into the temporary directory at the
start.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than using the global thoughout each function, pass in these
values. This allows tests to use different values when testing the same
functions.
Improve a few comments while we are here.
No functional change is intended.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is not needed anymore, so drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 252ed872 ("kconfig: remove meaningless prefixes in defconfig files")
The -D option is used, but plumb it through --debug to enable a full
traceback when something goes wrong.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add test for u_boot_spl_pubkey_dtb. The test adds a public key to the
dtb and checks if the required nodes will be added to the images dtb.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This adds a new etype 'u-boot-spl-pubkey-dtb'. The etype adds the public
key from a certificate to the dtb. This creates a '/signature' node which
is turn contains the fields which make up the public key. Usually this
is done by 'mkimage -K'. However, 'binman sign' does not add the public
key to the SPL. This is why the pubkey is added using this etype.
The etype calls the underlying 'fdt_add_pubkey' tool.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add documentation for btool which calls 'fdt_add_pubkey'
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The method 'connect_contents_to_file()' calls ObtainsContents() with
'fake_size' argument. Without providing the argument in the blob_dtb
we are not able to call this method without error.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
While signing a fit compressed data (i.e. 'blob-ext') is decompressed,
but never compressed again. When compressed data was wrapped in a
section, decompression leads to an error because the outer section had
the original compressed size but the inner entry has the
uncompressed size now.
While singing there is no reason to decompress data. Thus, decompression
should be disabled.
Furthermore, bintools should be collected before loading the data. This
way bintools are available if processing is required on a node.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add tests to reach 100% code coverage for the added etype encrypted.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The new encrypted etype generates a cipher node in the device tree
that should not be evaluated by binman, but still be kept in the
output device tree.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This adds a new etype encrypted.
It creates a new cipher node in the related image similar to the
cipher node used by u-boot, see boot/image-cipher.c.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Drop the use of a numbered key file since numbering is just for the test
devicetree files. Also adjust the tests to avoid putting a hard-coded
path to binman in the file, using the entry arg instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmS+Xv0cHGV1Z2VuLmhy
aXN0ZXZAY29sbGFib3JhLmNvbQAKCRAesx4CDqwvyMgxB/9BTjFfVaglu5+m/kiw
XEVSJSwe1H3sc5vFlMUYTSAOSF/mzdZIZHXC6THkCU1yfzu9AZXhp4mfRUiNTwth
w8bvYXm4ZjSxcGPVxVqfThN8iT/SWLpaUC8j7TosP1VKYwzpGmqLyO+ZLu7IwdH+
/wyXFuYtVQVxmSC6SMNAD5eNtS4O6pufat5e5EkhR2atZ/rhhAYmb9zv3RFuCuSM
bxqM+4/FqpENaIdMOPk7EbB3S1C5MsJS2b+s1oIRRLfItlLjpQG4nZnuJGRlL/Bg
mcqYYgHrAnFbLXVOEe5WxMKR1E2fMbtKSlJGpoYO9rSdQRzxGuyRrDm9M77GH2pJ
0Q/F
=DT1v
-----END PGP SIGNATURE-----
Merge tag 'u-boot-at91-fixes-2023.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91
First set of u-boot-atmel fixes for the 2023.07 cycle:
This small fixes set includes the LTO configs for the boards that had
the SPL size up to the limit (sama5d2-based), such that more code can be
added. It also includes a fix for mmc non-removable.
If the device attached to the MMC bus is not removable, set force card-detect
bit to bypass card detection procedure, so card detection pin can be used for
other purposes.
It's also a workaround for SAMA5D2 who doesn't drive CMD if using GPIO for card
detection.
Signed-off-by: Zixun LI <zli@ogga.fr>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
arm-none-linux-gnueabihf-ld.bfd: u-boot-spl section `__u_boot_list' will not fit in region `.sram'
arm-none-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 100 bytes
SPL is at limit so to stop seeing above error in built, enable
link time optimizations CONFIG_LTO.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
Adding just a tiny bit more code for sama5d2_icp_mmc leads to a SRAM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
[eugen.hristev@microchip.com: restrict patch just to CONFIG_LTO]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
The USB 3.0 driver xhci-mem.c requires CONFIG_SYS_CACHELINE_SIZE to be set.
Define the cache line size for QEMU on RISC-V to be 64 bytes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Apply the trailing space changes in the guide document.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Adds a trailing space to SYS_PROMPT to make it easier to distinguish
between commands and the prompt.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The clock id needs to be changed to be consistent with Linux.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Drop the PLL part in SYSCRG driver and separate to be a single
PLL driver of which the compatible is "starfive,jh7110-pll".
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Harts need to use per-hart stack before any function call, even if that
function is a simple one. When the callee uses stack for register save/
restore, especially RA, if nested call, concurrent access by multiple
harts on the same stack will cause data-race.
This patch sets up SP before `board_init_f_alloc_reserve`. A side effect
of this is that the memory layout has changed as the following:
+----------------+ +----------------+ <----- SPL_STACK/
| ...... | | hart 0 stack | SYS_INIT_SP_ADDR
| malloc_base | +----------------+
+----------------+ | hart 1 stack |
| GD | +----------------+ If not SMP, N=1
+----------------+ | ...... |
| hart 0 stack | +----------------+
+----------------+ ==> | hart N-1 stack|
| hart 1 stack | +----------------+
+----------------+ | ...... |
| ...... | | malloc_base |
+----------------+ +----------------+
| hart N-1 stack| | GD |
+----------------+ +----------------+
| | | |
Signed-off-by: Bo Gan <ganboing@gmail.com>
Cc: Rick Chen <rick@andestech.com>
Cc: Leo <ycliang@andestech.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Do not limit the maximum size of the buffer that is used to decompress
the OS image in to, this causes issue while inflating the image, if image
size is greater than the buffer.
Remove CONFIG_SYS_BOOTM_LEN
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Enabling FIT_SIGNATURE required the old authentication method to be
disabled so disable this for K3 SOCs and enable FIT_SIGNATURE for K3
Platforms.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
[ cleanup the patch ]
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
We are using our custMpk for signing that is a 4096 bit key, 4096 bit
rsa key requires a SHA512 hashing algorithm to be enabled as per the
source. Even though it is not mandated but this is how it works and is
tested.
Enables SHA512 if fit signature is enabled on K3 platforms.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
FIT signature requires the updates to u-boot.dtb and the DTB that we
pack don't get updates with the changes of the signature node.
Pack u-boot.dtb as the default DTB so that the signature node changes
can be reflected in them.
(Note, this is only packaging the primary platform and the secondary
platform will require manual changes for the FIT signature enablement)
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
[ add additional boards that were missing ]
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fit signature mechanism through the standards require the presence of
.key and .crt in the folder with the same name, since we are using our
custMpk only for the signing, update the format to that of standards to
be compatible for packaging easily.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
