Commit graph

79 commits

Author SHA1 Message Date
Bartosz Golaszewski
2aa20c43e4 twister: remove board
This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in updating
it, this patch proposes to remove it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2019-05-28 13:58:06 -04:00
Joris Offouga
4e267b92fb pico-imx7d: Convert DM MMC
This patch enable convert DM MMC for imx7d-pico board and variant.

Before the DM conversion only usdhc3 was enabled and therefore it appeared
as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2,
which left unattended would drive changes to existing pico-pi bootscripts and
environment variables that rely on mmc 0.

Setup the alias of mmc0 and usdhc3 so that existing pico-imx7d boot code will
work unmodified.

When converting to DM_MMC it is necessary that SPL initializes eMMC
by itself, so move the original eMMC initialization from U-Boot
proper to SPL.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:16:24 +02:00
Joris Offouga
d5f3a470de pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
This patch is necessary for convert this board to dm driver model

DM GPIO requires gpio_request() to be called explicitly before
doing any gpio operation

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-25 19:16:24 +02:00
Fabio Estevam
00102ae520 pico-imx7d: README: Recommend the usage of a USB hub
Since commit 9e3c0174da ("pico-imx7d: Add LCD support") we started to
notice some hangs in U-Boot.

There is not an issue on such commit per se, but due to the LCD support
the current drawn is increased and this may cause issues when powering
pico-imx7d-pi from USB.

Some computers may be a bit strict with USB current draw and will
shut down their ports if the draw is too high.

The solution for that is to use an externally powered USB hub between the
board and the host computer.

Add such recommendation to the README file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-03-31 20:19:19 +02:00
Fabio Estevam
9b8d9ec41a pico-imx6ul: Fix eMMC boot after DM_MMC conversion
After the DM_MMC conversion the following eMMC boot error is observed:

U-Boot SPL 2019.04-rc4 (Mar 20 2019 - 18:53:28 +0000)
Trying to boot from MMC1
MMC Device 0 not found
spl: could not find mmc device 0. error: -19
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This happens because the SPL code does not initialize the SDHC pins
and clock.

Fix it by moving the original eMMC initialization from U-Boot proper
to SPL.

Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Berton <fabio.berton@ossystems.com.br>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-31 19:54:56 +02:00
Fabio Estevam
28a36fd823 pico-imx6ul: README: Adjust the binary name after DM conversion
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Fabio Estevam
0a112072bb pico-imx6ul: Convert to DM_PMIC
Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is
under an I2C bus, conver to DM_I2C as well.

Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT
to avoid build warnings.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Fabio Estevam
cad779c0a4 pico-imx6ul: Convert to CONFIG_DM_GPIO
Convert to CONFIG_DM_GPIO.

Also, DM GPIO requires gpio_request() to be called explicitly before
doing any gpio operation, so do as requested.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Fabio Estevam
737d8bd820 pico-imx6ul: Convert to DM MMC
Select CONFIG_DM_MMC=y in order to support MMC driver model.

This allows the MMC board related code to be removed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Fabio Estevam
9e3c0174da pico-imx7d: Add LCD support
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-01-28 12:53:48 +01:00
Fabio Estevam
780e31e93f pico-imx7d: Add USB Host support
USB OTG2 port is connected to the USB host connector.

Add support for it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-09 18:28:06 +02:00
Otavio Salvador
f7df8932cc pico-imx7d: Add a new defconfig with PICO-Hobbit selected
This adds a new defconfig which pre-selects the PICO-Hobbit baseboard
allowing a completely non-interactive boot process.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-18 16:55:21 +02:00
Otavio Salvador
f40d0e8b25 pico-imx7d: Fix TechNexion spelling on MAINTAINERS file
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-18 16:55:21 +02:00
Otavio Salvador
f4e5516bc1 pico-imx6ul: Add a new defconfig with PICO-Pi selected
This adds a new defconfig which pre-selects the PICO-Pi baseboard
allowing a completely non-interactive boot process.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-18 16:55:21 +02:00
Otavio Salvador
8854cf2591 pico-imx6ul: Fix TechNexion spelling on MAINTAINERS file
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-18 16:55:21 +02:00
Fabio Estevam
d27748b7cb pico-imx6ul: Add instructions for booting in Falcon mode
Falcon mode allows the SPL to load and jump directly to the kernel,
without loading U-Boot proper.

Add detailed step by step on how to use Falcon mode on pico-imx6ul.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:22:52 +02:00
Otavio Salvador
9ddd1cd596 pico-imx6ul: Add Falcon mode support
Falcon mode boots the kernel directly from SPL, without loading
the full U-Boot.

As pico-imx6ul does not have a GPIO for selecting Falcon versus normal
mode, enter in Falcon mode when the customer selects the
CONFIG_SPL_OS_BOOT option in menuconfig.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:22:52 +02:00
Otavio Salvador
6dcd8918bb pico-imx6ul: Add new pico-hobbit config
The new config skips the boot menu which asks which board is in
use. This is useful to allow direct booting of image without user
iteration.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:04:24 +02:00
Otavio Salvador
978138fab8 pico-imx6ul: Sync README with pico-imx7d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:04:24 +02:00
Fabio Estevam
c97c9e0804 pico-imx6ul: Update the README file
Update the README file to take into accound the switch to SPL.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:04:24 +02:00
Fabio Estevam
000829fdb8 pico-imx6ul: Add support for the 512MB module
Currently only the module with 256MB of RAM is supported.

Add support for the 512MB of RAM variant as well.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:04:24 +02:00
Fabio Estevam
82a8a93327 pico-imx6ul: Convert to SPL
There are two versions of imx6ul pico SOMs: one with 256MB and another
one with 512MB of RAM.

Convert to SPL so that both versions can be supported. This patch
doesn't rework the clock initialization to avoid changing the behavior
in this same patch, so it will be cleaned up in future.

Currently only the 256MB is tested/supported.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:04:24 +02:00
Fabio Estevam
4cdeda511f pico-imx7d: Update the README file
Update the README file to take into accound the switch to SPL.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-06 09:19:13 -04:00
Tom Rini
275906dc1b pico-pi: Add Otavio as maintainer
Update the MAINTAINERS file to list Otavio Salvador as the maintainer
for this board.

Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-31 14:47:01 -04:00
Otavio Salvador
0a7b54f587 pico-imx7d: README: Drop old instructions about secure mode
Our default config already has the secure mode supported, so the
manual step is not required anymore.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23 10:59:48 +02:00
Otavio Salvador
619fc167b6 pico-imx7d: README: Use dfu-util to flash U-Boot
The DFU allows a more user friendly use as the details where the
bootloader is installed are abstracted.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23 10:59:48 +02:00
Fabio Estevam
e5ccad5d00 pico-imx7d: Do not override addrmap5
The addrmap5 value is the same for the 512MB and 1GB variants,
so there is no need to override it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23 10:59:48 +02:00
Fabio Estevam
78d30a1bc0 pico-imx7d: Add Falcon mode support
Falcon mode boots the kernel directly from SPL, without loading
the full U-Boot.

As pico-imx7d does not have a GPIO for selecting Falcon versus
normal mode, enter in Falcon mode when the customer selects
the CONFIG_SPL_OS_BOOT option in menuconfig.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23 10:59:48 +02:00
Fabio Estevam
d5b7177f91 pico-imx7d: Add SPL support
Convert pico-imx7d to SPL support.

There are two variants of pico-imx7d SOMs:
- One with 512MB of RAM
- One with 1GB of RAM

The 512MB module contains two Hynix H5TC2G63GFR-PBA.
The 1GB module contains two Hynix H5TC4G63GFR-PBA.

The RAM size is determined in runtime by reading GPIO1_12.

While at it, also add USB Serial Download mode support as it
is very helpful for loading SPL and u-boot.img via imx_usb_loader.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23 10:59:48 +02:00
Ladislav Michl
9b0888ced4 twister: Let SPL load U-Boot from MMC
MMC is not initialized in SPL, so it cannot load u-boot.img
preventing boot from MMC.

Also driver specific functions are guarded with generic
configuration options which leads to build failures when device
driver is not enabled in config. Fix that by using driver
specific defines.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Stefano Babic <sbabic@denx.de>
2018-05-23 22:06:40 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Vanessa Maegima
0bfd4f81ae pico-imx7d: Add "how to boot with NXP 4.1 Kernel"
The NXP 4.1 kernel needs to boot with secure boot.

Add information on how to enable secure boot mode.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
2017-09-18 17:15:28 +02:00
Eric Nelson
8590786acf imx: imx7d: remove CamelCase from ENET_xMHz macros
Update these macros to use all upper-case to avoid checkpatch
warnings:

	ENET_25MHz,
	ENET_50MHz,
	ENET_125MHz,

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-09-18 17:15:28 +02:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Stefano Babic
552a848e4f imx: reorganize IMX code as other SOCs
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/<SOC>.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic <sbabic@denx.de>

CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Akshay Bhat <akshaybhat@timesys.com>
CC: Ken Lin <Ken.Lin@advantech.com.tw>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Heiko Schocher <hs@denx.de>
CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
CC: Christian Gmeiner <christian.gmeiner@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Nikita Kiryanov <nikita@compulab.co.il>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: "Eric Bénard" <eric@eukrea.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Ye Li <ye.li@nxp.com>
CC: Peng Fan <peng.fan@nxp.com>
CC: Adrian Alonso <adrian.alonso@nxp.com>
CC: Alison Wang <b18965@freescale.com>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Martin Donnelly <martin.donnelly@ge.com>
CC: Marcin Niestroj <m.niestroj@grinn-global.com>
CC: Lukasz Majewski <lukma@denx.de>
CC: Adam Ford <aford173@gmail.com>
CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
CC: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Soeren Moch <smoch@web.de>
CC: Richard Hu <richard.hu@technexion.com>
CC: Wig Cheng <wig.cheng@technexion.com>
CC: Vanessa Maegima <vanessa.maegima@nxp.com>
CC: Max Krummenacher <max.krummenacher@toradex.com>
CC: Stefan Agner <stefan.agner@toradex.com>
CC: Markus Niebel <Markus.Niebel@tq-group.com>
CC: Breno Lima <breno.lima@nxp.com>
CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>
CC: Jaehoon Chung <jh80.chung@samsung.com>
CC: Scott Wood <oss@buserror.net>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Anatolij Gustschin <agust@denx.de>
CC: Simon Glass <sjg@chromium.org>
CC: "Andrew F. Davis" <afd@ti.com>
CC: "Łukasz Majewski" <l.majewski@samsung.com>
CC: Patrice Chotard <patrice.chotard@st.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stephen Warren <swarren@nvidia.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: "Álvaro Fernández Rojas" <noltari@gmail.com>
CC: York Sun <york.sun@nxp.com>
CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>
CC: Chen-Yu Tsai <wens@csie.org>
CC: George McCollister <george.mccollister@gmail.com>
CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>
CC: Filip Brozovic <fbrozovic@gmail.com>
CC: Petr Kulhavy <brain@jikos.cz>
CC: Eric Nelson <eric@nelint.com>
CC: Bai Ping <ping.bai@nxp.com>
CC: Anson Huang <Anson.Huang@nxp.com>
CC: Sanchayan Maity <maitysanchayan@gmail.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Patrick Delaunay <patrick.delaunay@st.com>
CC: Gary Bisson <gary.bisson@boundarydevices.com>
CC: Alexander Graf <agraf@suse.de>
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12 10:17:44 +02:00
Fabio Estevam
8d6040c725 pico-imx7d: Remove bouncing email
Wig Cheng's email bounces, so remove it from the maintainers list.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-06-29 21:30:16 -04:00
Vanessa Maegima
1541d7a63d pico-imx7d: Add initial support
Add the initial support for pico-imx7d board based on Wig Cheng's
source code.

Add support for eMMC, USB gadget, I2C, PMIC and Ethernet.

For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-05-31 09:58:40 +02:00
Tom Rini
4125bbcef6 Merge branch 'master' of git://git.denx.de/u-boot-mmc
- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to
  match other TI platforms in the same situation.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-16 08:10:50 -04:00
Tom Rini
8850c5d57c Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15 10:40:05 -04:00
Masahiro Yamada
4aa2ba3a34 mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature.  Deprecate the
former.

This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15 18:28:23 +09:00
Jean-Jacques Hiblot
d5abcf94c7 ti: boot: Register the MMC controllers in SPL in the same way as in u-boot
To keep a consistent MMC device mapping in SPL and in u-boot, let's
register the MMC controllers the same way in u-boot and in the SPL.
In terms of boot time, it doesn't hurt to register more controllers than
needed because the MMC device is initialized only prior being accessed for
the first time.
Having the same device mapping in SPL and u-boot allows us to use the
environment in SPL whatever the MMC boot device.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-03-19 22:17:14 -04:00
Masahiro Yamada
1d2c0506d3 mmc: move more driver config options to Kconfig
Move (and rename) the following CONFIG options to Kconfig:

  CONFIG_DAVINCI_MMC  (renamed to CONFIG_MMC_DAVINCI)
  CONFIG_OMAP_HSMMC   (renamed to CONFIG_MMC_OMAP_HS)
  CONFIG_MXC_MMC      (renamed to CONFIG_MMC_MXC)
  CONFIG_MXS_MMC      (renamed to CONFIG_MMC_MXS)
  CONFIG_TEGRA_MMC    (renamed to CONFIG_MMC_SDHCI_TEGRA)
  CONFIG_SUNXI_MMC    (renamed to CONFIG_MMC_SUNXI)

They are the same option names as used in Linux.

This commit was created as follows:

[1] Rename the options with the following command:

find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
'

[2] Commit the changes

[3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

[4] Move the options with the following command
tools/moveconfig.py -y -r HEAD \
MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

[5] Sort and align drivers/mmc/Makefile for readability

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:15 +09:00
Jagan Teki
03bf9d58b9 imx: s/docs\/README.imximage/doc\/README.imximage/g
Fixed typo for doc/README.imximage on respective imximage.cfg files.

Cc: Tom Rini <trini@konsulko.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00
Robert P. J. Day
fc0b5948e0 Various, accumulated typos collected from around the tree.
Fix various misspellings of:

 * deprecated
 * partition
 * preceding,preceded
 * preparation
 * its versus it's
 * export
 * existing
 * scenario
 * redundant
 * remaining
 * value
 * architecture

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2016-10-06 20:57:40 -04:00
Fabio Estevam
938076efa9 pico-imx6ul: Directly write to register LDOGCTL
Register LDOGCTL contains only bit 0 as a valid bit, so there is no need
to do a read-modify-write operation.

Simplify the code by writing directly to this register.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-09-06 18:22:48 +02:00
Vanessa Maegima
88e4774efd pico-imx6ul: Add PMIC support
Add PMIC support. Tested by command "pmic PFUZE3000 dump".

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-19 19:52:12 +02:00
Vanessa Maegima
ca103e0996 pico-imx6ul: Add USB Host support
Add USB host support.

Tested by connecting a USB pen drive:

=> usb start
starting USB...
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:50 +02:00
Vanessa Maegima
dab1493459 pico-imx6ul: Add a README file
Add a README file to help users to install U-boot binary into the eMMC.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:49 +02:00
Diego Dorta
6d7aa51acc pico-imx6ul: Add Ethernet support
Pico-imx6ul has a KSZ8081 Ethernet PHY.

Add support for it.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2016-07-12 17:58:49 +02:00
Fabio Estevam
69cc7dbf1f Add initial support for Technexion's PICO-IMX6UL-EMMC board
Add support for Technexion's PICO-IMX6UL-EMMC board.

For information about this board, please visit:
http://www.technexion.com/products/pico/pico-som/pico-imx6-emmc

Signed-off-by: Richard Hu <richard.hu@technexion.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-19 16:37:36 +02:00