Commit graph

92 commits

Author SHA1 Message Date
Tom Rini
8e3da9dd11 Merge branch 'master' of git://git.denx.de/u-boot-dm 2015-01-30 09:24:42 -05:00
Simon Glass
d0cff03e18 dm: spi: Move slave details to child platdata
At present we go through various contortions to store the SPI slave's chip
select in its private data. This only exists when the slave is active so
must be set up when it is probed. Until the device is probed we don't
actually know what chip select it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the chip select when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:56 -07:00
Simon Glass
83c7e434c9 dm: core: Allow uclass to set up a device's child before it is probed
Some buses need to set up their devices before they can be used. This setup
may well be common to all buses in a particular uclass. Support a common
pre-probe method for the uclass, called before any bus devices are probed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
081f2fcbd9 dm: core: Allow the uclass to set up a device's child after binding
For buses, after a child is bound, allow the uclass to perform some
processing. This can be used to figure out the address of the child (e.g.
the chip select for SPI slaves) so that it is ready to be probed.

This avoids bus drivers having to repeat the same process, which really
should be done by the uclass, since it is common.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
dac8db2ce6 dm: core: Allow uclasses to specify private data for a device's children
In many cases the per-child private data for a device's children is defined
by the uclass rather than the individual driver. For example, a SPI bus
needs to store information about each of its children, but all SPI drivers
store the same information. It makes sense to allow the uclass to define
this data.

If the driver provides a size value for its per-child private data, then use
it. Failng that, fall back to that provided by the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
9cc36a2b89 dm: core: Add a flag to control sequence numbering
At present we try to use the 'reg' property and device tree aliases to give
devices a sequence number. The 'reg' property is often actually a memory
address, so the sequence numbers thus-obtained are not useful. It would be
better if the devices were just sequentially numbered in that case. In fact
neither I2C nor SPI use this feature, so drop it.

Some devices need us to look up an alias to number them within the uclass.
Add a flag to control this, so it is not done unless it is needed.

Adjust the tests to test this new behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
b367053102 dm: core: Add a function to get a device's uclass ID
This is useful to check which uclass a device is in.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
0118ce7957 dm: core: Add a post_bind method for parents
Allow parent drivers to be called when a new child is bound to them. This
allows a bus to set up information it needs for that child.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
ba8da9dc43 dm: core: Allow uclasses to specify platdata for a device's children
In many cases the child platform data for a device's children is defined by
the uclass rather than the individual devices. For example, a SPI bus needs
to know the chip select and speed for each of its children. It makes sense
to allow this information to be defined the SPI uclass rather than each
individual driver.

If the device provides a size value for its child platdata, then use it.
Failng that, fall back to that provided by the uclass.

Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:55 -07:00
Simon Glass
cdc133bde9 dm: core: Allow parents to have platform data for their children
For buses it is common for parents to need to know the address of the child
on the bus, the bus speed to use for that child, and other information. This
can be provided in platform data attached to each child.

Add driver model support for this, including auto-allocation which can be
requested using a new property to specify the size of the data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:54 -07:00
Simon Glass
f8a85449ef dm: core: Allocate platform data when binding a device
When using allocated platform data, allocate it when we bind the device.
This makes it possible to fill in this information before the device is
probed.

This fits with the platform data model (when not using device tree),
since platform data exists at bind-time.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:54 -07:00
Simon Glass
22cc069160 dm: Don't run tests if U-Boot cannot be built
There is no point in running the tests if U-Boot cannot be built. Abort in
this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:54 -07:00
Simon Glass
25ab4b0303 dm: i2c: Provide an offset length parameter where needed
Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-01-29 17:09:53 -07:00
Simon Glass
f9a4c2da72 dm: i2c: Rename driver model I2C functions to permit compatibility
Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
3669e0e759 dm: gpio: Add better functions to request GPIOs
At present U-Boot sort-of supports the standard way of reading GPIOs from
device tree nodes, but the support is incomplete, a bit clunky and only
works for GPIO bindings where #gpio-cells is 2.

Add new functions to request GPIOs, taking full account of the device
tree binding. These permit requesting a GPIO with a simple call like:

   gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN);

This will request the GPIO, looking at the device's node which might be
this, for example:

   cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>;

The GPIO will be set to input mode in this case and polarity will be
honoured by the GPIO calls.

It is also possible to request and free a list of GPIOs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Guilherme Maciel Ferreira
39931f966a dumpimage: fit: extract FIT images
The dumpimage is able to extract components contained in a FIT image:

  $ ./dumpimage -T flat_dt -i CONTAINER.ITB -p INDEX FILE

The CONTAINER.ITB is a regular FIT container file. The INDEX is the poisition
of the sub-image to be retrieved, and FILE is the file (path+name) to save the
extracted sub-image.

For example, given the following kernel.its to build a kernel.itb:

  /dts-v1/;
  / {
      ...
      images {
        kernel@1 {
          description = "Kernel 2.6.32-34";
          data = /incbin/("/boot/vmlinuz-2.6.32-34-generic");
          type = "kernel";
          arch = "ppc";
          os = "linux";
          compression = "gzip";
          load = <00000000>;
          entry = <00000000>;
          hash@1 {
            algo = "md5";
          };
        };
        ...
      };
      ...
    };

The dumpimage can extract the 'kernel@1' node through the following command:

  $ ./dumpimage -T flat_dt -i kernel.itb -p 0 kernel
  Extracted:
   Image 0 (kernel@1)
    Description:  Kernel 2.6.32-34
    Created:      Wed Oct 22 15:50:26 2014
    Type:         Kernel Image
    Compression:  gzip compressed
    Data Size:    4040128 Bytes = 3945.44 kB = 3.85 MB
    Architecture: PowerPC
    OS:           Linux
    Load Address: 0x00000000
    Entry Point:  0x00000000
    Hash algo:    md5
    Hash value:   22352ad39bdc03e2e50f9cc28c1c3652

Which results in the file 'kernel' being exactly the same as '/boot/vmlinuz-2.6.32-34-generic'.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Guilherme Maciel Ferreira
f41f5b7c05 dumpimage: add 'T' option to explicitly set the image type
Some image types, like "KeyStone GP", do not have magic numbers to
distinguish them from other image types. Thus, the automatic image
type discovery does not work correctly.

This patch also fix some integer type mismatches.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Simon Glass
6ed4dc7876 test: Add unit tests for bootm image decompression
Use each compression method (including uncompressed). Test for normal
operation, insufficient space and corrupted data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Simon Glass
ac9a215de0 test: Rename test_compression to ut_compression
Try to keep the names of the unit test commands consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Simon Glass
cc4477289d test: Add DEBUG output option to test-fit.py
Sometimes it is useful to see the output from U-Boot, so add an option to
make this easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Simon Glass
b5493d17bd sandbox: Correct ordering of 'sb save' commands
Prior to commit d455d87 there was an inconsistency between the position of
the 'address' parameter in 'sb load' and 'sb save'. This was corrected but
it broke some tests. Fix the tests and also the help for 'sb save'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Tom Rini
a5a5882611 Merge git://git.denx.de/u-boot-dm 2014-12-11 20:47:34 -05:00
Tom Rini
fc9b0b8043 Merge branch 'master' of git://git.denx.de/u-boot-usb
Conflicts:
	board/freescale/mx6sxsabresd/mx6sxsabresd.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-12-11 18:40:49 -05:00
Simon Glass
ecc2ed55ee dm: i2c: Add tests for I2C
Add some basic tests to check that the system works as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2014-12-11 13:18:43 -07:00
Masahiro Yamada
a56642c7ba dm_test: improve the appearance shown by "dm tree" command
The command "dm tree" lists devices in a tree-like format.
This commit makes it look more like what the Unix command "tree"
shows.

=> dm tree
 Class       Probed   Name
----------------------------------------
 root        [ + ]    root_driver
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 gpio        [   ]    |-- gpio_sandbox
 serial      [   ]    |-- serial_sandbox
 serial      [ + ]    |-- serial
 demo        [   ]    |-- triangle
 demo        [   ]    |-- square
 demo        [   ]    |-- hexagon
 gpio        [   ]    |-- gpios
 spi         [   ]    |-- spi@0
 spi_emul    [   ]    |   `-- flash@0
 cros_ec     [ + ]    `-- cros-ec@0

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:41 -07:00
Suriyan Ramasami
6c016485a6 sandbox: script for testing sandbox/ext4/fat/fs commands
Test size/read/write commands in a sandbox environment.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>

Acked-by: Simon Glass <sjg@chromium.org>
2014-11-23 06:49:05 -05:00
Lukasz Majewski
fbd3b79d77 test: ums: Add sleep before unmount directory
This change helps to run script on machines with quite long uptime.
Without this the following error emerges:

File: ./dat_14M.img
umount: /mnt/tmp-ums-test: device is busy.
        (In some cases useful info about processes that use
         the device is found by lsof(8) or fuser(1))
TX: md5sum:083d3d22b542d3ecba61b12d17e03f9f
mount: /dev/sdd6 already mounted or /mnt/tmp-ums-test busy
mount: according to mtab, /dev/sdd6 is already mounted on /mnt/tmp-ums-test

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-11-14 21:09:12 +01:00
Rabin Vincent
2302b3ab85 hush: make run_command() return an error on parsing failure
run_command() returns success even if the command had a syntax error;
correct this behaviour.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Simon Glass <sjg@chromium.org)
2014-11-07 16:27:06 -05:00
Rabin Vincent
484408fb51 hush: return consistent codes from run_command()
Attempting to run:
 - an empty string
 - a string with just spaces

returns different error codes, 1 for the empty string and 0
for the string with just spaces.  Make both of them return
0 for consistency.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Simon Glass <sjg@chromium.org)
2014-11-07 16:27:06 -05:00
Simon Glass
b01495e644 test: Add a simple test to detected warnings with uint64_t, uintptr_t
These types are problematic because they are typically declared in a
non-standard way in U-Boot. For example, U-Boot uses 'long long' for
int64_t even on a 64-bit machine whereas stdint.h uses 'long'.
Similarly, U-Boot always uses 'long' for intptr_t whereas stdint.h mostly
uses 'int'.

This simple test script runs a few toolchains on a few archs to check for
warnings.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27 11:04:01 -04:00
Simon Glass
87b6398b46 cli: hush: Adjust 'run' command to run each line of the env var
The run command treats each argument an an environment variable. It gets the
value of each variable and executes it as a command. If an environment
variable contains a newline and the hush cli is used, it is supposed to
execute each line one after the other.

Normally a newline signals to hush to exit - this is used in normal command
line entry - after a command is entered we want to return to allow the user
to enter the next one. But environment variables obviously need to execute
to completion.

Add a special case for the execution of environment variables which
continues when a newline is seen, and add a few tests to check this
behaviour.

Note: it's not impossible that this may cause regressions in other areas.
I can't think of a case but with any change of behaviour with limited test
coverage there is always a risk. From what I can tell this behaviour has
been around since at least U-Boot 2011.03, although this pre-dates sandbox
and I have not tested it on real hardware.

Reported-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27 11:03:33 -04:00
Simon Glass
4324174d03 test: dm: Add additional GPIO tests
Add tests for gpio_requestf() and for memory leaks.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:53 -06:00
Simon Glass
756ac0bb15 test: dm: Support memory leak checking as a core feature
Check the state of the malloc() heap before each test is run, so that tests
can verify that all is well at the end. Provide helper functions to mark
the heap and to check that it returns to its initial state.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:53 -06:00
Simon Glass
d44f597b12 dm: gpio: Add gpio_requestf() helper for printf() strings
Add a helper which permits a printf()-style format string for the requester
string.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
4b8f11c2cc test: dm: Update GPIO tests for new gpio_request() method
Now that gpio_request() is handled by the uclass, updates the tests
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
0ae0cb7b50 dm: sf: Add tests for SPI flash
Add a simple test for SPI that uses SPI flash. It operates by creating a
SPI flash file and using the 'sf test' command to test that all
operations work correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:52 -06:00
Simon Glass
ebcab48a03 dm: spi: Add tests
These tests use SPI flash (and the sandbox emulation) to operate.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:51 -06:00
Simon Glass
a8981d4f80 dm: core: Add functions for iterating through device children
Buses need to iterate through their children in some situations. Add a few
functions to make this easy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:45 -06:00
Simon Glass
129acd4c75 test: Add a test for command repeat
This performs a command, then repeats it, and checks that the repeat
happens.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Simon Glass
07b342783a test: Remove tabs from trace test
These cause U-Boot to print a list of available commands. It doesn't break
the test, but it is best to remove them from the output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Simon Glass
dfe6f4d684 Correct sandbox filesystem commands in FIT image test
The host filesystem name has changed, so update the tests. The tests now
run again correctly:

$ make O=b/sandbox sandbox_defconfig all
...
$ test/image/test-fit.py -u b/sandbox/u-boot
FIT Tests

=========
Kernel load
Kernel + FDT load
Kernel + FDT + Ramdisk load

Tests passed
Caveat: this is only a sanity check - test coverage is poor

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00
Lukasz Majewski
801123fe50 test: ums: Add script for testing UMS gadget operation
This commit adds new test for UMS USB gadget to u-boot mainline tree.
It is similar in operation to the one already available in test/dfu
directory.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20 13:10:33 +02:00
Lukasz Majewski
4c984c8136 test: dfu: cosmetic: Add missing license information to DFU test scripts
By mistake I've forgotten to add the SPDX license tags for the DFU testing
scripts.
This commit fixes that and also provides some other relevant information.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20 13:10:33 +02:00
Lukasz Majewski
0d7f85f057 test: dfu: Extend dfu_gadget_test_init.sh to accept sizes of test files
It is now possible to pass to the dfu_gadget_test_init.sh script the sizes
of files to be generated.

This feature is required by UMS tests which reuse this code.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20 13:10:32 +02:00
Michael van der Westhuizen
e0f2f15534 Implement generalised RSA public exponents for verified boot
Remove the verified boot limitation that only allows a single
RSA public exponent of 65537 (F4).  This change allows use with
existing PKI infrastructure and has been tested with HSM-based
PKI.

Change the configuration OF tree format to store the RSA public
exponent as a 64 bit integer and implement backward compatibility
for verified boot configuration trees without this extra field.

Parameterise vboot_test.sh to test different public exponents.

Mathematics and other hard work by Andrew Bott.

Tested with the following public exponents: 3, 5, 17, 257, 39981,
50457, 65537 and 4294967297.

Signed-off-by: Andrew Bott <Andrew.Bott@ipaccess.com>
Signed-off-by: Andrew Wishart <Andrew.Wishart@ipaccess.com>
Signed-off-by: Neil Piercy <Neil.Piercy@ipaccess.com>
Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Cc: Simon Glass <sjg@chromium.org>
2014-08-09 11:17:01 -04:00
Stephen Warren
54ce79c8a5 test: dfu: add some more test cases
On Tegra, the DFU buffer size is 1M. Consequently, the 8M test always
fails. Add tests for the 1M size, and one byte less as a corner case,
so that some large tests are executed and expected to pass.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:17:00 -04:00
Stephen Warren
c0e6663b0a test: dfu: cleanup before execution
Call cleanup() before running tests too. If a previous test was CTRL-C'd
some stale files may have been left around. dfu-util refuses to receive
a file to a filename that already exists, which results in false test
failures if the files aren't cleaned up first.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:17:00 -04:00
Lukasz Majewski
50a3532128 test:dfu: README file update
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-08-09 11:17:00 -04:00
Stephen Warren
7ad67e5554 test: dfu: script enhancements
Various misc enhancements to dfu_gadget_test.sh:

* After every write (download), perform a write to a different file
  with different data. This ensures that the DFU buffer's content is
  replaced, so that if the read (upload) succeeds, we know that the
  correct data was actually read from the storage device, rather than
  simply being left over in the DFU buffer. This requires two alt
  setting names to be passed to the script, and a dummy data file to
  be generated by dfu_gadget_test_init.sh.

* Fix the assumption that dfu_gadget_test.sh is run from the directory
  that contains it, by cd'ing to that directory before invoking
  ./dfu_gadget_test_init.sh.

* Use $DIR$RCV_DIR consistently, rather than using plain $RCV_DIR in
  some places.

* Add 959, 961 test file sizes, to be consistent with having one
  more than and one less than all the other "round" sizes 64, 128, and
  4096.

* Remove references to $BKP_DIR from dfu_gadget_test_init.sh, since it
  isn't used.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:59 -04:00
Lukasz Majewski
a4c86bbb5a test:dfu: Add test scripts for testing DFU regression
This commit adds test scripts for testing if any commit has introduced
regression to the DFU subsystem.

It uses md5 to test if sent and received file is correct.
The test detailed description is available at README file.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-08-09 11:16:59 -04:00