Commit graph

12 commits

Author SHA1 Message Date
Simon Glass
8c103c33fb dm: dts: Convert driver model tags to use new schema
Now that Linux has accepted these tags, move the device tree files in
U-Boot over to use them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:26 -07:00
Geert Uytterhoeven
68083b897b renesas: Fix RPC-IF compatible values
The compatible values used for device nodes representing Renesas Reduced
Pin Count Interfaces were based on preliminary versions of the Device
Tree Bindings.

Correct them in both DTSi files and drivers, to match the final DT
Bindings.

Note that there are no DT bindings for RPC-IF on RZ/A1 yet, hence the
most logical SoC-specific value is used, without specifying a
family-specific value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-09-02 13:25:01 +02:00
Geert Uytterhoeven
e17205d067 ARM: dts: rmobile: Fix RPC-IF device node names
According to the Generic Names Recommendation in the Devicetree
Specification Release v0.3, and the DT Bindings for the Renesas Reduced
Pin Count Interface, the node name for a Renesas RPC-IF device should be
"spi".  Especially on R-Car Gen3 and RZ/G2, the node name matters, as
the node is enabled by passing a DT fragment from TF-A to U-Boot, and
from U-Boot to subsequent software.

Fix this by renaming the device nodes from "rpc" to "spi".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-09-02 13:25:01 +02:00
Lad Prabhakar
67704d6dfb ARM: dts: renesas: Remove leading 0x from rpc node
Remove the leading "0x" from rpc node to fix the below dtc warning:

Warning (simple_bus_reg): Node /soc/rpc@0xee200000 simple-bus unit
address format error, expected "ee200000"

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-01-18 13:29:12 +01:00
Marek Vasut
836f1ce6c7 ARM: dts: rmobile: Scrub unused DT nodes
Remove DT nodes which are not used by U-Boot, like audio and video in/out
nodes. This saves about 35 kiB on the resulting U-Boot binary without any
impact on functionality.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-29 00:28:34 +02:00
Marek Vasut
317d13ac63 ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0
Synchronize R-Car Gen3 device trees with Linux 5.0,
commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09 18:19:10 +02:00
Eugeniu Rosca
3a4511ce4a ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N
v2019.01 commit cbff9f80ce ("ARM: dts: rmobile: Sync Gen3 DTs with
Linux 4.19.6") made the sdhi/usb nodes available in r8a77965.dtsi.

Hence, remove the SDHI/USB nodes from r8a77965-u-boot.dtsi. This is
equivalent to partially reverting below v2019.01 commits:
 - f529bc551b ("ARM: dts: rmobile: Extract USB nodes on M3N")
 - 830b94f768 ("ARM: dts: rmobile: Extract SDHI nodes on M3N")

Duplicating the nodes from <soc>.dtsi to <soc>-u-boot.dtsi is obviously:
 - not needed if no U-boot-specific changes are needed in those nodes.
 - potentially dangerous/error-prone, since the duplicated properties
   override the properties originally defined in <soc>.dtsi. One
   possible consequence is that <soc>.dtsi is getting an update from
   Linux, while <soc>-u-boot.dtsi stays unchanged. In this situation,
   the obsolete property values from <soc>-u-boot.dtsi will take
   precedence masking some of the <soc>.dtsi updates, potentially
   leading to all kind of obscure issues.

Below is the dtdiff of r8a77965-salvator-x-u-boot.dtb (the only "user"
of r8a77965-u-boot.dtsi) before and after the patch (slightly
reformatted to avoid 'git am/apply' issues and to reduce the width).

What below output means is there is already a mismatch in some of
SDHI/USB nodes between r8a77965.dtsi and r8a77965-u-boot.dtsi. Since no
U-Boot customization is needed in SDHI/USB DT nodes, get rid of them in
r8a77965-u-boot.dtsi.

$> dtdiff before-r8a77965-salvator-x-u-boot.dtb \
           after-r8a77965-salvator-x-u-boot.dtb
 --- /dev/fd/63  2019-03-09 12:57:40.877963983 +0100
 +++ /dev/fd/62  2019-03-09 12:57:40.877963983 +0100
 @@ -1471,7 +1471,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x51 0xc 0x1>;
        clocks = <0x6 0x1 0x13a>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa5 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x4d>;
 @@ -1492,7 +1492,7 @@

      sd@ee120000 {
        clocks = <0x6 0x1 0x139>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa6 0x4>;
        max-frequency = <0xbebc200>;
        power-domains = <0x1 0x20>;
 @@ -1504,7 +1504,7 @@
      sd@ee140000 {
        bus-width = <0x8>;
        clocks = <0x6 0x1 0x138>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        fixed-emmc-driver-type = <0x1>;
        interrupts = <0x0 0xa7 0x4>;
        max-frequency = <0xbebc200>;
 @@ -1526,7 +1526,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x5a 0xf 0x1>;
        clocks = <0x6 0x1 0x137>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa8 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x56>;
 @@ -1868,14 +1868,14 @@

      usb-phy@ee0a0200 {
        #phy-cells = <0x0>;
 -      clocks = <0x6 0x1 0x2be>;
 +      clocks = <0x6 0x1 0x2bf>;
        compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy";
        phandle = <0x47>;
        pinctrl-0 = <0x4c>;
        pinctrl-names = "default";
        power-domains = <0x1 0x20>;
        reg = <0x0 0xee0a0200 0x0 0x700>;
 -      resets = <0x6 0x2be>;
 +      resets = <0x6 0x2bf>;
        status = "okay";
      };

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-09 17:57:04 +01:00
Marek Vasut
830b94f768 ARM: dts: rmobile: Extract SDHI nodes on M3N
The SDHI nodes are not in Linux 4.17 DTs in M3N, pull them into U-Boot
specific DT extras until they hit mainline Linux, to make syncing of
DTs easier.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
2018-12-04 09:21:07 +01:00
Marek Vasut
f529bc551b ARM: dts: rmobile: Extract USB nodes on M3N
The USB nodes are not in Linux 4.17 DTs in M3N, pull them into U-Boot
specific DT extras until they hit mainline Linux, to make syncing of
DTs easier.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
2018-12-04 09:21:07 +01:00
Marek Vasut
8c7d9e1f62 ARM: dts: rmobile: Extract RPC node to u-boot specific DT
The RPC DT bindings are still work in progress. Extract the RPC DT node
from the DT to allow easier update and so it can be replaced once the DT
bindings are stable.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
2018-12-04 09:21:07 +01:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Marek Vasut
50e031efa4 ARM: dts: rmobile: Import R8A77965 M3N DT files from Linux
Import the R8A77965 M3N DT from Linux 4.16-rc1 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05 10:59:38 +01:00