Commit graph

60853 commits

Author SHA1 Message Date
Yannick Fertré
d68ed0fad6 stm32mp1: configs: add display devices
Add support of panels otm8009A, RM68200 & DSI controller.
Limit resolution to 1280x800.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:40:15 +02:00
Yannick Fertré
a6bbc62cab stm32mp1: configs: update video
Update video configs to support bitmap 16bpp, 24bpp,
32bpp & RLE8.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:34 +02:00
Yannick Fertré
aa37506bd3 ARM: dts: stm32mp1: add dsi host for stm32mp157c-dk2 board
The new class dsi host allows the management of the bridge DPI to DSI.
This bridge is embedded in the chipset mp1 (come from synopsys company).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:25 +02:00
Yannick Fertré
b49711f0c0 ARM: dts: stm32mp1: add dsi host for stm32mp157c-ev1 board
The new class dsi host allows the management of the bridge DPI to DSI.
This bridge is embedded in the chipset mp1 (come from synopsys company).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:14 +02:00
Yannick Fertré
30173bacdd ARM: dts: stm32f769: add display for STM32F769 disco board
Enable the display controller, mipi dsi bridge & panel.
Set panel display timings.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:01 +02:00
Yannick Fertré
0e73892184 board: Add STM32F769 SoC, discovery board support
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:38:47 +02:00
Yannick Fertré
06ef131d30 video: add support of panel RM68200
Support for Raydium RM68200 720p dsi 2dl video mode panel.
This rm68200 panel driver is based on the Linux Kernel driver from
drivers/gpu/drm/panel/panel-raydium-rm68200.c.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:38:36 +02:00
Yannick Fertré
78157b2fa5 video: add support of panel OTM8009A
Support for Orise Tech otm8009a 480p dsi 2dl video mode panel.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:38:26 +02:00
Yannick Fertré
18b6ca5c5a video: add support of STM32 MIPI DSI controller driver
Add the STM32 DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:38:12 +02:00
Yannick Fertré
d4f7ea83fc video: add MIPI DSI host controller bridge
Add a Synopsys Designware MIPI DSI host bridge driver, based on the
Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:37:08 +02:00
Yannick Fertré
23f965a4c6 dm: Add a dsi host uclass
Display Serial Interface (DSI) host can usefully be modelled
as their own uclass.
DSI defines a serial bus and a communication protocol
between the host and the device (panel, bridge).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:34:43 +02:00
Shyam Saini
4e1c879f71 configs: icorem6: Enable nandbcb command
This also enables mtd configs which are required by nandbcb command.

This command would be used to configure boot control block(BCB) while
writing spl image on nand device.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
792b253658 colibri_imx7: provide proper node name to pmic_get
Implementation of pmic_get() uses uclass_find_device_by_name(), which
behaviour was changed in 4213609cc7
("drivers: core: use strcmp when find device by name"). Now we have to
supply full node name with unit address.

Fixes boot issue:
U-Boot 2019.07-00788-g0ef6e69a1e-dirty (Jul 19 2019 - 15:27:02 +0300)

CPU:   Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 41C
Reset cause: POR
DRAM:  512 MiB
initcall sequence 9ffd3a4c failed at call 87803c61 (err=-19)
ERROR Please RESET the board

Fixes: 4213609cc7("drivers: core: use strcmp when find device by name")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13 22:49:12 +02:00
Sjoerd Simons
80cc95140c spl, Makefile: Take external offset into account for fit images
When building a FIT image for SPL to load also take into account the
configured external offset. This allows the SPL to load the u-boot FIT
image correctly when configuring SECURE_BOOT on i.mx6 is enabled
(with CONFIG_FIT_EXTERNAL_OFFSET=0x3000).

Note this doesn't allow secure booting; but it does allow an unsigned
SPL/u-boot with secure boot support eanbled to boot on open device.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
e2c3c2e32c colibri_imx7: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
541bfadc70 colibri_imx6: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
3bae9bb286 colibri-imx6ull: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Igor Opaniuk
5f1e987c8b apalis_imx6: remove legacy sdboot wrapper
Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-13 22:49:12 +02:00
Ye Li
f9f42b07ff imx8qm/qxp: Set SPL TEXT base to OCRAM base
Modify the SPL TEXT base from OCRAM alias to OCRAM base 0x100000, so
we can use full OCRAM not limit to 96KB

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13 22:49:12 +02:00
Ye Li
9a2738581a imx8: Jump from alias to OCRAM address at SPL init
When running SPL on iMX8, the A core starts at address 0
which is a alias to OCRAM 0x100000.
The alias only map first 96KB of OCRAM, so this require the
SPL size can't beyond 96KB. But when using SPL DM, the size increase
significantly and may exceed 96KB.
So to fix the problem, we will change SPL linker address to OCRAM
address 0x100000. And then jump to the absolute address not the PC relative
address for entering OCRAM.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13 22:49:12 +02:00
Lukasz Majewski
5e93871305 imx: config: Update KP's TPC70 config to support SWUpdate
This patch updates envs responsible for using USB pendrive as a
SWUpdate based tool for recovery and update.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:12 +02:00
Lukasz Majewski
0bcb11fa1f imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-boot
This patch converts the TPC70 to use driver model and device tree
description in both SPL and u-boot proper.

Notable changes (DM/DTS conversion):

- PINCTRL{_IMX6}
- DM_I2C
- enable 'regulator' and 'pmic' commands
- DM_MMC and BLK (USDHC)
- DM_ETH
- DM WDT (including SYSRESET)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:12 +02:00
Lukasz Majewski
62cef35bb0 imx: dts: Add u-boot specific set of device tree properties for tpc70
This commit adds new file - imx6q-kp-u-boot.dtsi with a set of u-boot
specific properties for imx6q KP device.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
f1a46398f0 imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description
This commit defines the TPC70 imx6q board with device tree description.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
b7cb2ae72d imx: tpc70: led: Enable LED default state
This change sets the default state of LEDs on TPC70.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
eff76b10fa imx: tpc70: cosmetic: Replace magic numbers when setting ENET clock
This is a cosmetic change, just to use proper define instead
of magic numbers.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
58c76e63f1 imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot
The TPC70 can boot from SD card (debug/development) and eMMC (production).
The board_boot_order() function provides a run time check for the device
from which one wants to boot (it is selected by GPIO pins setup).

Moreover, a fallback to SD card is provided if the detection is not
possible or working properly.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
309ce98fcb imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
The TPC70 can boot from eMMC's boot0. This patch allows it to update
this HW partition's SPL.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
a142e601f8 imx: tpc70: config: Add script commands to update u-boot and OE's wic
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Jun Nie
7cc7c1e9db pico-imx7d: Support distro boot for FIT image case
Support distro boot for pico imx7d in FIT image case.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Joris Offouga <offougajoris@gmail.com>
2019-10-13 22:49:11 +02:00
Jun Nie
b86745efea pico-imx7d: add config to enable CAAM
Add config to enable CAAM so that hardware random number generator
works.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
2019-10-13 22:49:11 +02:00
Adam Ford
43db8e3e41 ARM: imx6q_logic: Remove legacy pinmuxing code from board file.
With the OCRAM expanded to 256KB and the SPL_PINCTRL enabled with
-u-boot.dtsi entries to include the pinmuxing in SPL, the manual
code setting up the pinmux can go away.

This patch removes the legacy pinmuxing code from the board file.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-13 22:49:11 +02:00
Adam Ford
2881ec544d ARM: imx6q_logic: Enable Pin muxing in SPL
With the 256KB of OCRAM available to SPL now, there should be
enough room to enable the pinmuxing in SPL from the device tree.

This patch enables SPL_PINCTRL et al and adds the serial and
usdhc pin mux references to the -u-boot.dtsi file so the pins can be
configured from the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-13 22:49:11 +02:00
Adam Ford
f9faa1616b ARM: imx6q_logic: Enable 256KB OCRAM
Since this board config only supports, the i.MX6D/i.MX6Q configurations,
256K of on-chip RAM is available which increases the space available
to SPL to help further reduce board code and further enable device tree
functions.

This patch enables 256K of RAM.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-13 22:49:11 +02:00
Soeren Moch
954252aa35 board: tbs2910: Convert eth to driver model
So we can remove lots of legacy config code.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13 22:49:11 +02:00
Soeren Moch
2fabe35187 board: tbs2910: Convert pci to driver model
So we can get rid of legacy pci config code.

PCI_PNP is not required for this board, remove it to reduce the size of the
u-boot binary.

DM_PCI does not start the host controller automatically anymore. Do so
in preboot instead.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13 22:49:11 +02:00
Soeren Moch
dc6c8fb84e ARM: dts: imx6q-tbs2910: Sync devicetree with kernel 5.3
Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13 22:49:11 +02:00
Sjoerd Simons
6ee03c9212 mx6: mx6sabre common: Use more conventional spelling of fdtfile
Both the distro boot configuration as well as the general pxe support
standardized on fdtfile as the variable to hold the dtb filename.
Adjust to follow that such that e.g. "pxe boot" will just work.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-10-13 22:49:11 +02:00
Shawn Guo
6802d7951c Add i.MX7D based Meerkat96 board support
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of
96Boards community and complies with all Consumer Edition board
specifications.

https://www.novtech.com/products/meerkat96.html
https://www.96boards.org/product/imx7-96/

The initial supported/tested devices include:
 - Debug serial
 - SD
 - USB Host (with Ethernet)

With these support, it's good enough for loading Linux Kernel from SD or
Ethernet over USB.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-13 22:49:11 +02:00
Shawn Guo
ad61658dd6 ARM: dts: import meerkat96 board support
It imports device tree source of meerkat96 board from Linux Kernel.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-10-13 22:49:11 +02:00
Yannick Fertré
66c3724656 video: add support of MIPI DSI interface
Mipi_display.c contains a set of dsi helpers.
This file is a copy of file drm_mipi_dsi.c (linux kernel).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 21:24:47 +02:00
Yannick Fertré
7389776cda include: Add new DCS commands in the enum list
Adding new DCS commands which are specified in the
DCS 1.3 spec related to CABC.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 21:24:47 +02:00
Yannick Fertré
aeaf330649 video: stm32: stm32_ltdc: add bridge to display controller
Manage a bridge insert between the display controller & a panel.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 21:24:47 +02:00
Tom Rini
7a779ed175 travis: Exclude MIPS from the bcm job
We don't need to pull in anything from the MIPS job so exclude that from
the new bcm job and make it clear it's building only ARM.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-13 11:21:56 -04:00
Tom Rini
9189d6f1e9 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Remember the device being emulated for Sandbox PCI
- Update Kconfig options for FSP 1.0
- Drop RESET_BASE and RESET_SEG_SIZE that are no longer used
2019-10-12 10:52:48 -04:00
Tom Rini
0c9cc5155c Merge branch '2019-10-11-master-imports'
- Assorted cleanups
- FAT bugfixes
- mediatek platform updates
2019-10-12 10:10:59 -04:00
Tom Rini
36317705cb Merge branch '2019-10-11-ti-imports'
- Various improvements to dra7xx, keystone 3, am65x SoCs
- Platform updates
- remoteproc improvements
2019-10-12 10:09:13 -04:00
Marek Szyprowski
7d2dc6af54 cmd: itest: add support for .q size specifier
Add support for quad (64bits) memory access specifier.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-10-11 19:05:14 -04:00
Heinrich Schuchardt
f13683816b fs: fat: get_contents() always returns -1 for errors
If out of memory, return -1 and not -ENOMEM from get_contents().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-11 19:05:14 -04:00
Heinrich Schuchardt
c7a86d1645 fs: fat: treat invalid FAT clusters as errors
When hitting an invalid FAT cluster while reading a file always print an
error message and return an error code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-11 19:05:14 -04:00