Commit graph

71569 commits

Author SHA1 Message Date
Amit Kumar Mahapatra
e2b71c382f arm64: zynqmp: Rename clocks as per the Arasan NAND driver
In zynqmp.dtsi file renamed "clk_sys" clock to "controller" and
"clk_flash" clock to "bus" as per upstreamed Arasan NAND driver.
This fixes NAND driver probe failure.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Amit Kumar Mahapatra
fbf043d7e6 arm64: zynqmp: Update device tree properties for nand flash
Update the following device tree properties for nand flash

- Set software ecc mode.
- Set bch as ecc algo.
- Set read block to 0.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Michal Simek
cde1aaeae2 arm64: zynqmp: Update psu_init for zcu1275
Update clock/pll setup, ddr, MIOs based on 2020.2 hw design.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Michal Simek
9577b2edf3 arm64: zynqmp: Add idt 8a34001 chip to zcu208/zcu216
There is Linux driver for these chips that's why add it to device tree.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Michal Simek
7a50093a44 arm64: zynqmp: Add missing psu inits for zcu208/216
Add missing configurations file for zcu208 and zcu216.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Ashok Reddy Soma
d5843f26ac arm64: zynqmp: Add emmc specific parameters
EMMC will have bus-width 8 and it is non-removable in general. These
are missing from dt node. Add bus-width and non-removable parameters
to emmc node.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Ashok Reddy Soma
8600dd8ad4 arm64: zynqmp: Increase size of malloc pool
size of malloc() pool for use before relocation is not sufficient
for ZynqMP mini u-boot with emmc configuration. Increase it to 4K.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Ashok Reddy Soma
2df44bbbb5 xilinx: zynq: Enable time and timer commands
Enable time command to get the elapsed time and timer commands.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Robert Hancock
e8a212ac77 net: gem: Fix setting PCS auto-negotiation state
The code was trying to disable PCS auto-negotiation when a fixed-link node
is present and enable it otherwise. However, the PCS registers were being
written before the PCSSEL bit was set in the network configuration
register, and it appears that in this state, PCS register writes are
ignored. The result is that the intended change only took effect on the
second network operation that was performed, since at that time PCSSEL is
already enabled.

Fix the order of register writes so that PCS registers are only written to
after the PCS is enabled.

Fixes: 26e62cc971 ("net: gem: Disable PCS autonegotiation in case of fixed-link")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 09:18:47 +02:00
Tom Rini
d8eafb16c8 Prepare v2021.04-rc5
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-29 17:20:13 -04:00
Tom Rini
a7d3ac6148 Merge branch '2021-03-28-assorted-bugfixes' 2021-03-28 20:28:51 -04:00
Jessica Clarke
3b142045e8 Support building on macOS/arm64
On Arm-based Macs, -no_pie is ignored and gives a linker warning.
Moreover, the build falls over with:

  ld: Absolute addressing not allowed in arm64 code but used in '_image_type_ptr_aisimage' referencing '_image_type_aisimage'

for dumpimage and mkimage, since we put data structs in text sections
not data sections and so cannot have dynamic relocations. Instead, move
the sections to __DATA and drop disabling PIE.

Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-03-28 17:30:35 -04:00
Sean Anderson
6863c7f1b6 dm: test: Always include command.h for print_ut
We need this header for U_BOOT_CMD, which is always present even without
EFI.

Fixes: 82c468a049 ("dm: test: Update Makefile conditions")

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-28 17:30:35 -04:00
Simon Glass
3c2503ee33 test: Add udevice declaration to avoid build error
When including this file on a board other than sandbox (e.g by enabling
UNIT_TEST and CMD_SETEXPR) an results. Fix it by declaring struct udevice
first.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-28 17:30:35 -04:00
Tom Rini
31637e0bc0 Merge branch '2021-03-27-master-imports'
- Rework the deprecation warnings to be consistently phrased.
- Add in a warning for DM_I2C, for a year from next release.
- Fix Azure builds of Windows host tools.
2021-03-27 11:58:37 -04:00
Tom Rini
94d66d8b24 Azure: Use "pacman -Sy" to install the toolchain
We now see an error such as:
warning: database file for 'ucrt64' does not exist (use '-Sy' to download)
error: failed to prepare transaction (could not find database)

So use -Sy as suggested.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-27 11:57:10 -04:00
Simon Glass
65c8cdc72b dm: i2c: Add a migration method for I2C
This probably should have been done a while back since it is a core
system. Add a migration deadline of later this year, to catch the
stragglers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:51:22 -04:00
Simon Glass
782dac5b7d Makefile: Drop the old SPI flash migration message
This message does not seem to make sense. It may be out of date. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
8cd1874f4c Makefile: Use common code for DM_ETH deprecation warning
Update the CONFIG_DM_ETH check to use the 'deprecated' function.

Tested with snow

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
78b4a564cb Makefile: Use common code for WDT deprecation warning
Update the CONFIG_WDT check to use the 'deprecated' function.

Tested with kmcent2

Old message:

===================== WARNING ======================
This board does not use CONFIG_WDT (DM watchdog support).
Please update the board to use CONFIG_WDT before the
v2019.10 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_WDT (Driver Model
for DM watchdog). Please update the board to use
CONFIG_WDT before the v2019.10 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
ec384f9f12 Makefile: Use common code for SPI_FLASH deprecation warning
Update the CONFIG_DM_SPI_FLASH check to use the 'deprecated' function.

Tested with vinco

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH (Driver Model
for SPI flash). Please update the board to use
CONFIG_DM_SPI_FLASH before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
d13aee07fd Makefile: Use common code for DM_VIDEO deprecation warning
Update the CONFIG_DM_VIDEO check to use the 'deprecated' function.

Tested with pxm2

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_VIDEO Please update
the board to use CONFIG_DM_VIDEO before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_VIDEO (Driver Model
for video). Please update the board to use
CONFIG_DM_VIDEO before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
==================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
39e526a8ec Makefile: Use common code for PCI deprecation warning
Update the CONFIG_DM_PCI check to use the 'deprecated' function.

Tested with MPC8349ITX

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_PCI Please update
the board to use CONFIG_DM_PCI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_PCI (Driver Model
for PCI). Please update the board to use
CONFIG_DM_PCI before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
099288bf78 Makefile: Use common code for LIBATA deprecation warning
Update the CONFIG_LIBATA check to use the 'deprecated' function.

Tested with MPC8349ITX

Old message:

===================== WARNING ======================
This board does use CONFIG_LIBATA but has CONFIG_AHCI not
enabled. Please update the storage controller driver to use
CONFIG_AHCI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_AHCI (Driver Model
for AHCI). Please update the board to use
CONFIG_AHCI before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
a883435298 Makefile: Use common code for MVSATA_IDE deprecation warning
Update the CONFIG_MVSATA_IDE check to use the 'deprecated' function.

Tested with nas220

Old message:

===================== WARNING ======================
This board does use CONFIG_MVSATA_IDE which is not
ported to driver-model (DM) yet. Please update the storage
controller driver to use CONFIG_AHCI before the v2019.07
release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_AHCI (Driver Model
for AHCI instead of CONFIG_MVSATA_IDE). Please update the board to use
CONFIG_AHCI before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
9e035b8ee1 Makefile: Use common code for USB deprecation warning
Update the USB check to use the 'deprecated' function.

Tested with xpress

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_USB (Driver Model
for  USB). Please update the board to use
CONFIG_DM_USB before the v2019.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
77dc55ea39 Makefile: Use common code for MMC deprecation warning
Update the MMC check to use the 'deprecated' function.

Tested with zc5202

Old message:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
the board to use CONFIG_DM_MMC before the v2019.04 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

New message:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC (Driver Model
for MMC). Please update the board to use
CONFIG_DM_MMC before the v2019.04 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
1373252851 Makefile: Add common code to report deprecation
Add a function which can be called to report a migration problem. This
will make it easier to add new migration checks, since the logic and
strings are not spread out over 8 lines of code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:26 -04:00
Simon Glass
06467e4652 Makefile: Move non-DM migration messages to the top
At present the driver model migration messages are mixed with the others.
Collect them together before starting to refactor them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 09:48:25 -04:00
Tom Rini
1886e9d0c3 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes related to FSL-IFC, watchdog
- layerscape-pcie, flexspi, T2080rdb.
2021-03-24 08:11:30 -04:00
Maxim Kochetkov
cad6ffa34d mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages
Linux commit a75bbe71a27 ("mtd: rawnand: fsl_ifc: fix FSL NAND driver to
 read all ONFI parameter pages")

Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page
read is not valid, the host should read redundant parameter page copies.
Fix FSL NAND driver to read the two redundant copies which are mandatory
in the specification.

Signed-off-by: Jane Wan <Jane.Wan@nokia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Hou Zhiqiang
ae5cbc43b3 pci: layerscape: Change to allocate zeroed memery for struct ls_pcie
As on some incipient Layerscape platforms (LS1043A series) there isn't
separate PF control register block, these registers reside in the LUT
register block, so when the driver detected there isn't 'ctrl', it will
assign the 'lut' address to the ls_pcie->ctrl.

The current code allocate memory for the struct ls_pcie with random
contents, this can result in skipping to assign the ls_pcie->ctrl with
the 'lut' address, then further crash with the incorrect address.

Fixes: 118e58e26e ("pci: layerscape: Split the EP and RC driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
a7c532f94c configs: ls1028a: Correct CONFIG_ENV_SECT_SIZE
LS1028A-RDB/QDS has Micron "mt35xu02g" nor flash of size 256M with 128K
sector size. Correct CONFIG_ENV_SECT_SIZE value to 128K.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
6712856469 configs: ls1028aqds: Move CONFIG_SPI_FLASH_* definitions to defconfig
LS1028A-QDS has CONFIG_SPI_FLASH_SST and CONFIG_SPI_FLASH_EON defines
present in header. Move these entries from header to defconfigs.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
72655b254b configs: ls1028a: Unset CONFIG_SPI_FLASH_SPANSION
There is no Spansion flash on LS1028A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
43ec24be9b configs: lx2160a: Remove unused Flexspi config options
It is now safe to remove Flexspi configs NXP_FSPI_FLASH_SIZE and
NXP_FSPI_FLASH_NUM options from headers as they are no longer used by
driver anymore.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
3fadc80cd4 configs: lx2160a: Unset CONFIG_SPI_FLASH_SPANSION
There is no Spansion flash on LX2160A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Chris Packham
b4f8ffb6e8 board: freescale: t208xrdb: Add link to User Guide
The User Guide contains handy things like block diagrams and DIP switch
settings and it's even available on the public web. Add a link to it in
the README.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Chris Packham
805c525b08 powerpc: t2080rdb: Enable RTC support
The T2080RDB has a ds1339 on i2c0. Add this to the devicetree and enable
the relevant support in the configs.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Chris Packham
f65774e1f6 rtc: ds1307: Add ds1339 compatible
As far as u-boot is concerned the ds1339 is compatible with the other
devices supported by the ds1307 driver. The Linux driver does expose
some additional functionality but as far as u-boot is concerned just
adding the compatible string is enough.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Tom Rini
bf3b0d69da Merge branch 'v2021.04-rc5' of https://github.com/lftan/u-boot 2021-03-23 08:11:30 -04:00
Aleksandar Gerasimovski
fc37c7a931 fsl_ifc: fix typo in the NOR CSOR register definition
The name of the define must indicate 'Asynchronous', so 'ASYNC' is more
appropriate. AYSNC is probably a typo, and checkpatch script is throwing
a warning if this is set in the board include files.

It is save to change this now as none of the existing designs is using it
so far, but we will use it in our design it help to make IFC settings
more transparent.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 15:27:08 +05:30
Siew Chin Lim
2dbcc037cc arm: socfpga: Only do 'is OS booted from FIT' checking when VAB is enabled
Check CONFIG_SOCFPGA_SECURE_VAB_AUTH before perform 'is OS booted from FIT'
checking in board_prep_linux function. And, fix typo of
CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE.

CONFIG_FIT will be enabled in both ATF and VAB boot flow, thus,
board_prep_linux function will always be called by both ATF and
VAB boot flow.

board_pre_linux function will do 'is OS booted from FIT' checking,
and it will be called before board_fit_image_post_process function.

VAB boot flow expects the OS is always booted from FIT and with VAB
signed cerfiticate because the VAB authentication is implemented in
board_fit_image_post_process function. So, VAB needs the 'is OS booted
from FIT' checking in board_pre_linux function.

However, for ATF boot flow, it is not a requirement that the OS must
always booted from FIT. The OS can be booted from individual Image and
kernel dtb file. Thus, we should not do 'if OS is booted from FIT'
checking in board_prep_linux function.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-03-23 14:46:35 +08:00
Tom Rini
1f9c3f13f6 Pull request efi-2021-04-rc5-2
Bug fixes:
 
 * re-enable loading UEFI binaries via UART
 * fix a NULL dereference in EFI console
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmBVAocACgkQxIHbvCwF
 GsTbyw//V/BZ5DxbmJU76QX/7imawlkvgInloxTjCNvTHQGiQvhM1eeGwcOvSeXW
 tEN6XYjZ/qwmqrydi5s2U7B7YctjGn9/eYxJ4HWafK1MCmmNPj5DX/J0TDUtyomh
 fM9YLhhCEwyJbV9IjCYvNsvQPxvQq1TNqQ5VCSlkBV2TmqOWjtZkerfiob6z6TAo
 k4zEic8eK7jVcwlEBTLvOSEvCX2vDWrFnbyuQVeuIoQExKB2kStUVGJiuKHkDoDs
 FvW0h4Hdpu/YnoOAR0ou08nNm1gRdPMnkY8kOJ53V9H6AwRa45IEmZzstoNLKoxi
 h/CwXD1SvJ96X4htWJyUWzVouWSBVG22VgHfXzgGMAyoTqt6Df3rZ6r3FeYq+cxu
 cWauIaz1FBBMsMnBuvFw3sCXzFQMPyME9HjgnjMA3bW04C/q2rPIP0OhzrLeRleo
 nTtyCto3mC+nBlNHs/brnv3d7yX4g/iY0zIns43HwE0hjCiPxE4iIPVelx7+ZlWz
 nb10iKE7GQl3Uz/iH37SVGnnXS8vAUcmyUVPHmMZAZVueadIpuMz9cHwAVhLpMFT
 O/NxgkO4B5l/p8JM6VtbHL8yZvSDEcHHJLXeT/B+7Ouxf3jo+oEzJMyXicQVnzjV
 iYlBkud3DXvw3YRW7UMusvbigAmBLMN0kju18MlfVEU0i8uv17o=
 =ixoU
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-04-rc5-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request efi-2021-04-rc5-2

Bug fixes:

* re-enable loading UEFI binaries via UART
* fix a NULL dereference in EFI console
2021-03-20 08:55:18 -04:00
Heinrich Schuchardt
76b0a19022 cmd/load: support uploading EFI binary via UART
When uploading an EFI binary via the UART we have to call
efi_set_bootdev() or we won't be able to execute it.

Put the includes into alphabetic order.

Fixes: 5f59518a7b ("efi_loader: setting boot device")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-19 20:54:55 +01:00
Heinrich Schuchardt
62df6e9c99 efi_loader: Uart device path
When uploading an EFI binary via the UART we need to assign a device path.

* Provide devicepath node to text conversion for Uart() node.
* Provide function to create Uart() device path.
* Add UART support to efi_dp_from_name().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-19 20:54:40 +01:00
Heinrich Schuchardt
a95f4c8859 efi_loader: NULL dereference in EFI console
Even if CONFIG_DM_VIDEO=y and stdout="vidconsole", a video device may not
be available. Check the return values of the relevant functions.

If no video output device is available, assume that the serial console is
in use.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-19 20:47:25 +01:00
Tom Rini
65f2e55b57 Merge branch '2021-03-19-assorted-fixes'
- NVMe cache fixes, API bugfix with !CONFIG_SYS_64BIT_LBA, ahci mediatek
  fix when debugging, ti-sysc uclass fix, sl28 MMC boot fix
2021-03-19 15:23:10 -04:00
Andre Przywara
4c49879689 nvme: Elaborate on cache maintenance operation in get/set_features
At the moment the nvme_get_features() and nvme_set_features() functions
carry a (somewhat misleading) comment about missing cache maintenance.

As it turns out, nvme_get_features() has no caller at all in the tree,
and nvme_set_features' only user doesn't use a DMA buffer.

Mention that in the comment, and leave some breadcrumbs for the future,
should those functions attract more users.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-19 10:36:55 -04:00
Andre Przywara
d0c04926cd nvme: Always invalidate whole cqes[] array
At the moment nvme_read_completion_status() tries to invalidate a single
member of the cqes[] array, which is shady as just a single entry is
not cache line aligned.
The structure is dictated by hardware, and with 16 bytes is smaller than
any cache line we usually deal with. Also multiple entries need to be
consecutive in memory, so we can't pad them to cover a whole cache line.

As a consequence we can only always invalidate all of them - U-Boot just
uses two of them anyway. This is fine, as they are only ever read by the
CPU (apart from the initial zeroing), so they can't become dirty.

Make this obvious by always invalidating the whole array, regardless of
the entry number we are about to read.
Also blow up the allocation size to cover whole cache lines, to avoid
other heap allocations to sneak in.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
2021-03-19 10:36:53 -04:00