Commit graph

47654 commits

Author SHA1 Message Date
Udit Agarwal
003c99de10 armv8: LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.
Adds config CONFIG_FSL_LS_PPA and CONFIG_FSL_CAAM in
LS2080AQDS and LS2080ARDB secure boot defconfig.

Removes CONFIG_FIT, as with CONFIG_FSL_LS_PPA enabled,
CONFIG_FIT is selected.

Removes CONFIG_SPL_RSA as in NOR boot SPL boot is not done.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Udit Agarwal
2d2219e6b9 armv8: LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.
Add the secure boot defconfigs for QSPI boot on LS1088ARDB
and LS1088AQDS platforms.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Udit Agarwal
30c41d2191 armv8: LS1088A_QSPI: SECURE_BOOT: Images validation
Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC
phase using esbc_validate command.

Enable validation of boot.scr script prior to its execution dependent
on "secureboot" flag in environment

Add header address for PPA to be validated during ESBC phase for
LS1088A platform based on LAyerscape Chasis 3.

Moves sec_init prior to ppa_init as for validation of PPA sec must
be initialised before the PPA is initialised.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Bhaskar Upadhaya
4def378fab armv8: ls1012a: Modify Kernel and Environment offset
Kernel is now located at 0x1000000 instead of 0xa00000
and envirorment variables are located at 3MB offset instead of
2MB in Flash.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Ran Wang
819163c44e armv8: Workaround for USB erratua on LS1012A
This is suplement for patch which handle below errata:
A-009007, A-009008, A-008997, A-009798

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Prabhakar Kushwaha
2db53cfe96 armv8: fsl-layerscape: Add support of disabling core prefetch
Instruction prefetch feature is by default enabled during core
release. This patch add support of disabling instruction prefetch
by setting core mask in PPA. Here each core mask bit represents a
core and prefetch is disabled at the time of core release.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Ashish Kumar
6b6b7e8a6c armv8: ls1088: Add fsl_fdt_fixup_flash
IFC-NOR and QSPI-NOR signals are muxed on SoC to save pins

Add fsl_fdt_fixup_flash() to disable IFC-NOR node in dts
if QSPI is enabled and vice-versa

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Yogesh Gaur
2557c5a942 driver: net: fsl-mc: flib changes for MC 10.3.0
Existing MC driver framework is based on MC-9.x.x flib. This patch
migrates MC obj (DPBP, DPNI, DPRC, DPMAC etc) to use latest MC flib
which is MC-10.3.0.

Changes introduced due to migration:
1. To get OBJ token, pair of create and open API replaces create APIs
2. Pair of close and destroy APIs replaces destroy APIs
3. For version read, get_version APIs replaces get_attributes APIs
4. dpni_get/reset_statistics APIs replaces dpni_get/set_counter APIs
5. Simplifies struct dpni_cfg and removes dpni_extended_cfg struct
6. Single API dpni_get_buffer_layout/set_buffer_layout replaces
   dpni_get_rx/set_rx, tx related, tx_conf_buffer_layout related APIs.
   New API takes a queue type as an argument.
7. Similarly dpni_get_queue/set_queue replaces
   dpni_get_rx_flow/set_rx_flow , tx_flow related, tx_conf related
   APIs

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
Ashish Kumar
ba34890420 armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfig
Unset USE_BOOTCOMMAND for all ls1088 defconfig files to fix
redefinition error. USE_BOOTCOMMAND was introduced in commit
b6251db8c3 ("Kconfig: Introduce USE_BOOTCOMMAND and migrate
BOOTCOMMAND").

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:55:17 -08:00
York Sun
316f0d0f8f powerpc: mpc85xx: Fix static TLB table for SDRAM
Most predefined TLB tables don't have memory coherence bit set for
SDRAM. This wasn't an issue before invalidate_dcache_range() function
was enabled. Without the coherence bit, dcache invalidation doesn't
automatically flush the cache. The coherence bit is already set when
dynamic TLB table is used. For some boards with different SPL boot
method, or with legacy fixed setting, this bit needs to be set in
TLB files.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-12-06 14:54:12 -08:00
Ran Wang
0f2296bab1 powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization
This issue is exposed after commit 9000eddbae ("drivers/usb/ehci:
Use platform-specific accessors"), the wrong endianness of EHCI
controller programing will cause USB function down.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:54:05 -08:00
Ran Wang
e6a727fffe powerpc/T104xRDB: Fix endian access issue on EHCI intinalization
This issue is exposed after commit 9000eddbae ("drivers/usb/ehci:
Use platform-specific accessors"), the wrong endianness of EHCI
controller programing will cause USB function down.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06 14:53:58 -08:00
Philipp Tomsich
c8e1ca3ebf tools: omapimage: fix corner-case in byteswap path
Since commit 2614a20847 ("common: command: tempory buffer should
have size of command line buf"), there have been consistent Travis CI
failures on my builds (interestingly not for Tom, even though building
the same commit id) due to a SEGV in building the byteswapped
omapimage:
     	    arm: pcm051_rev3
     make[2]: *** [MLO.byteswap] Error 139
     	      	  		       ^^^ error code for a SEGV

Turns out that the word-based byte-swapping loop in omapimage.c is to
blame. With the loop condition
       while (swapped <= (sbuf->st_size / sizeof(uint32_t)))
there had been one-too-many iterations for all file sizes divisible by
the sizeof(uint32_t).  I.e. we had 1 iteration for 0 bytes (and also 1
through 3 bytes) and 2 iterations at 4 bytes... clearly overshooting
on 0 and 4 bytes.

This commit fixes the calculation of an up-rounded word-count and
makes sure to keep the zero-based loop-counter below the number of
words to be processed.

References: 2614a20 ("common: command: tempory buffer should have size of command line buf")
Fixes: 79b9ebb ("omapimage: Add support for byteswapped SPI images")
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
2017-12-05 21:56:29 -05:00
Tom Rini
9188c4315c Patch queue for efi - 2017-12-05
Highlights for this release:
 
   - Dynamic EFI object creation (lists instead of static arrays)
   - EFI selftest improvements
   - Minor fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJaJxZhAAoJECszeR4D/txgtX4P/iTp602iM+2m4WP0P2K/L72b
 EsPAL4W/QXMBZBnq9MowQl7Ia3JU6bS1g2EDlbAvoQgbhmbTBfA6VxJmQj/AuOn0
 waxjyfBw/YL4010YAfmExdVy8Qj0k/SEXcxOiHYZJzmW1o3PXvLuLnetUNJ0Uip9
 GJQPcGjSaXY1VM7oAwpOVMWkbpaIIfgw9yrAc2Cw6KN8iHmaf6rPFBdWARGB7w9m
 znFtq0FpNQSLEEoyJVYAlqyRRsj+1wS3ExGnsL2no74njAgzKSWmdN7qFjkO7WC1
 w+CnZLiUv5MaboYK2uORW2qBQzRylyEXWCkqIaZL+EWElVqPRz7/VSDLUJxnZLbl
 vhDTRUB/kVwdrmB8lP21Rruk1EjCIyYDcGQ+nwhlDes/NJztfNlyOEm47N8LNyt6
 obRxOVC8nIjf4YptHB4CRgccGQAE7VqS/DqstV1plC1Ms+puG6SQvuPwlCkKX9XP
 qkZnirgzrUfGjmFMM3owoelA40jXWV4vv90HjQvwmaOftjPY3IJ+X0rgqUGbuOmn
 /R8OCW6PV0FIOx1k5/waZlqDnfFkChm56Rhxqf9LqEro37YTUjapXEgBn7a+132x
 /icaOySkFx0hy+cvPNQ5aXyNLQPDPS++Af9e/hcMewh4Zn5FrJqkJrmtLDZzGJIG
 LC5DWr8o9vwT41UftPb0
 =uyBA
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2017-12-05

Highlights for this release:

  - Dynamic EFI object creation (lists instead of static arrays)
  - EFI selftest improvements
  - Minor fixes
2017-12-05 17:52:16 -05:00
Alexander Graf
bb0bb91cf0 efi_stub: Use efi_uintn_t
Commit f5a2a93892 ("efi_loader: consistently use efi_uintn_t in boot
services") changed the internal EFI API header without adapting its existing
EFI stub users. Let's adapt the EFI stub as well.

Fixes: f5a2a93892 ("efi_loader: consistently use efi_uintn_t in boot services")
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-12-05 22:56:17 +01:00
Marek Szyprowski
7090ead3f2 ARM: Samsung: Add Exynos5422-based Odroid HC1 support
Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO
button. USB3.0 ports are used for build-in JMicron USB to SATA bridge
and Gigabit R8152 ethernet chips. HC1 uses only passive cooling.

This patch also updates Odroid's ADCmax array and reduces ADC tolerance
to 1% to ensure that XU4 and HC1 revisions are properly detected.

I've tested this with XU3, XU3-lite, XU4 and HC1 boards. In case of my test
boards I got following values from ADC register: 372, 370, 1281 and 1313.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-12-05 10:18:39 +09:00
Jaehoon Chung
d8b385b708 arm: dts: exynos4: fix the device-tree compile warning
After updating dtc-1.4.5 version, there are too many warning.
This patch is to fix about exynos4 series.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-12-05 10:18:39 +09:00
Tom Rini
9da7fb4a39 Prepare v2018.01-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04 18:27:17 -05:00
Tom Rini
0c4d24823e Merge git://git.denx.de/u-boot-uniphier 2017-12-04 10:24:35 -05:00
Tom Rini
da63df97ea Merge git://git.denx.de/u-boot-cfi-flash 2017-12-04 10:24:32 -05:00
Tom Rini
6b867dabe8 arm: Make gcc 6.0 or later a hard requirement now.
Move the warning to an error as we have been promising would happen in
this release.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04 10:23:53 -05:00
Peng Fan
448df354b0 scripts: spl: fix typo
Typo fix: CONIFG->CONFIG

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04 10:23:53 -05:00
Masahiro Yamada
af4e6d3a03 drivers: firmware: psci: use pr_* log functions instead of printf()
In Linux, the warning messages are printed out by pr_warn().

We can use Linux-like log functions in tree-wide.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04 10:23:53 -05:00
Derald D. Woods
8a3556edba omap3: evm: Explicitly use DISTRO_DEFAULTS features at startup
[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot
[fallback 1] Check MMC 0:1 zImage and run mmcbootz
[fallback 2] Check MMC 0:1 uImage and run mmcboot
[fallback 3] Check NAND partitions and run nandboot

If 'extlinux.conf' is not found on MMC 0, the previous boot behavior is
followed.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2017-12-04 10:23:53 -05:00
Peng Fan
90351547ce armv8: mmu: fix page table mapping
To page mapping the lowest 2 bits needs to be 0x3.
If not fix this, the final lowest 3 bits for page mapping is 0x1
which is marked as reserved.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-04 10:23:52 -05:00
Peng Fan
082693f4f0 arm64 :show_regs: show the address before relocation
After relocation, when error happends, it is hard to track
ELR and LR with asm file objdumped from elf file.

So subtract the gd->reloc_off the reflect the compliation address.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04 10:23:52 -05:00
Neil Armstrong
c7be3e5a79 ARM: arch-meson: build memory banks using reported memory from registers
As discussed at [1], the Amlogic Meson GX SoCs can embed a BL31 firmware
and a secondary BL32 firmware.
Since mid-2017, the reserved memory address of the BL31 firmware was moved
and grown for security reasons.

But mainline U-Boot and Linux has the old address and size fixed.

These SoCs have a register interface to get the two firmware reserved
memory start and sizes.

This patch adds a dynamic reservation of the memory zones in the device tree bootmem
reserved memory zone used by the kernel in early boot.
To be complete, the memory zones are also added to the EFI reserved zones.

Depends on patchset "Add support for Amlogic GXL Based SBCs" at [2].

[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-October/004860.html
[2] http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005410.html

Changes since v1:
- switched the #if to if(IS_ENABLED()) to compile all code paths
- renamed function to meson_board_add_reserved_memory()
- added a mem.h header with comment
- updated all boards ft_board_setup()

Changes since RFC v2:
- reduced preprocessor load
- kept Odroid-C2 static memory mapping as exception

Changes since RFC v1:
- switch to fdt rsv mem table and efi reserve memory
- replaced in_le32 by readl()

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[trini: Fix warning on khadas-vim over missing <asm/arch/mem.h>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04 10:17:29 -05:00
Neil Armstrong
5ff2ee44ee arm: Add Khadas VIM support based on Meson GXL family
This adds platform code for the Khadas VIM board based on a
Meson GXL (S905X) SoC with the Meson GXL configuration.

This initial submission supports UART, MMC/SDCard and Ethernet with the
Internal RMII PHY.

The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13
stable tree as of 4.13.8.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 09:59:03 -05:00
Neil Armstrong
96e7b5a174 arm: Add LibreTech CC support based on Meson GXL family
This adds platform code for the Libre Computer CC "Le Potato" board based on a
Meson GXL (S905X) SoC with the Meson GXL configuration.

This initial submission supports UART, MMC/SDCard and Ethernet with the
Internal RMII PHY.

The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13
stable tree as of 4.13.8.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 09:59:03 -05:00
Neil Armstrong
f49638e9f9 board: p212: use common ethernet init function
Switch P212 Ethernet init to the common Ethernet init function.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 09:59:03 -05:00
Neil Armstrong
9a41746f84 board: odroid-c2: use common ethernet init function
Switch Odroid-C2 Ethernet init to the common Ethernet init function.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 09:59:03 -05:00
Neil Armstrong
6915b10331 ARM: arch-meson: add ethernet common init function
Introduce a generic common Ethernet Hardware init function
common to all Amlogic GX SoCs with support for the
Internal PHY enable for GXL SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 09:59:02 -05:00
Masahiro Yamada
26e961c8cf libfdt: migrate fdt_wip.c to a wrapper of scripts/dtc/libfdt/fdt_wip.c
Now, lib/libfdt/fdt_wip.c is the same as scripts/dtc/libfdt/fdt_wip.c

Change the former to a wrapper of the latter.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04 09:59:02 -05:00
Masahiro Yamada
87be1e9fb4 libfdt: move fdt_find_regions() to fdt_region.c from fdt_wip.c
All the other fdt_*_region() functions are located in fdt_region.c,
while only fdt_find_regions() was added to fdt_wip.c, strangely.

Move it to the suitable place.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04 09:59:02 -05:00
Andre Przywara
78ad457b2d armv8: shrink exception table code
In the moment our exception entry code needs 34 instructions, so we
can't use put it directly into the table entry, which offers "only"
32 instructions there. Right now we just put an unconditional branch
there, then use a macro to place the 34 instructions *per entry* after
that. That effectivly doubles the size of our exception table, which
is quite a waste, given that we use it mostly for debugging purposes.

Since the register saving part is actually identical, let's just convert
that macro into a function, and "bl" into it directly from the exception
slot, of course after having saved at least the original LR.
This saves us about 950 bytes of code, which is quite a relief for some
tight SPLs, in particular the 64-bit Allwinner ones.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2017-12-04 09:59:02 -05:00
Dmitry Korunov
8993056fb3 add support for Raspberry Pi Zero W
Signed-off-by: Dmitry Korunov <dessel.k@gmail.com>
2017-12-04 09:59:02 -05:00
Simon Glass
0aac10f2f9 test: compression: Convert to unit test framework
Adjust this test to use the unit test framework. Drop the two existing
commands for running the tests and replace them with a single
'ut compression' command, with sub-commands.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Continue to have ret = run_test_internal(...) in run_test so ret
is always initialized]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04 09:58:20 -05:00
Masahiro Yamada
0faef2eba9 mtd: nand: denali: consolidate include directives
Include necessary headers explicitly without relying on indirect
header inclusion.

<common.h>, <malloc.h> are unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 22:00:03 +09:00
Masahiro Yamada
681ed4d0d5 mtd: nand: denali_dt: replace printf() with pr_err()
The Linux derived log functions can be used anywhere and easily
turned on/off by CONFIG_LOGLEVEL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 22:00:02 +09:00
Masahiro Yamada
ba8c9ea38a mtd: nand: include <asm/cache.h> from include/linux/mtd/rawnand.h
This is needed for ARCH_DMA_MINALIGN.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 22:00:01 +09:00
Masahiro Yamada
6ae3900a86 mtd: nand: Rename nand.h into rawnand.h
This header was renamed to rawnand.h in Linux.

The following is the corresponding commit in Linux.

  commit d4092d76a4a4e57b65910899948a83cc8646c5a5
  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
  Date:   Fri Aug 4 17:29:10 2017 +0200

      mtd: nand: Rename nand.h into rawnand.h

      We are planning to share more code between different NAND based
      devices (SPI NAND, OneNAND and raw NANDs), but before doing that
      we need to move the existing include/linux/mtd/nand.h file into
      include/linux/mtd/rawnand.h so we can later create a nand.h header
      containing all common structure and function prototypes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 22:00:00 +09:00
Masahiro Yamada
57f9bb9404 mtd: nand: denali: remove ad-hoc board_nand_init() entry
This driver is highly dependent on the configuration from denali_dt.c
Please enable CONFIG_NAND_DENALI_DT if you use this driver.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 21:59:59 +09:00
Masahiro Yamada
1a7e176d27 mtd: nand: denali: remove bogus __maybe_unused
denali_setup_data_interface() is always used.

I put __maybe_unused for a temporal use, then forgot to delete it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 21:59:53 +09:00
Masahiro Yamada
ac389b0749 ARM: uniphier: clean up board_init
Remove unnecessary DECLARE_GLOBAL_DATA_PTR and header includes.

<common.h> has been replaced with <linux/errno.h> and <linux/printk.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 21:59:52 +09:00
York Sun
2544f47078 mtd: cfi: Fix checking status register feature
Commit 72443c7f7d ("mtd: cfi: Add support for status register
polling") added a feature check to determine if status register
is available for certain flash chips. The "lower software bits"
register used to determine this feature is not backward compati-
ble. Older flash chips without this feature has reserved value
0xff. Instead of checking "lower software bits" register, use
CFI primary vendor-specific extended query. Since CFI version
1.4, software features can be read from offset 0x53 according to
document AN201168 from Cypress.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-12-04 07:41:32 +01:00
Simon Glass
1f0fe88db1 test/py: Allow any unit test suite to be found
The u-boot.sym file is scanned to find unit test suites for execution. At
present it only finds those whose names start with 'dm' or 'env'. This
code is buried in the bowels of the test code so when adding a new suite
it is not easy to discover why it is ignored by the test framework.

There seems to be no need to make this restriction. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
2017-12-02 18:32:58 -05:00
Simon Glass
49f22c38f1 test: compression: Put test variables in a struct
At present the test setup is somewhat mixed with the test itself. But if
the test setup fails (which it should not) then the test is actually
invalid. Put all the test buffers and sizes in a struct and separate out
the core code into a function.

This will make it easier to move the code to use the unit test framework.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-02 18:32:58 -05:00
Simon Glass
e93232e15e test: overlay: Use cmd_ut_category()
Adjust the code to use the common test-execution function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-02 18:32:58 -05:00
Simon Glass
4d869c1e49 test: Add a command function for test execution
The logic to either iterate through a list of tests or pick a named test
is common to at lest two test suits. Move this logic into a new function
and call it from the environment tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-02 18:32:58 -05:00
Peter Robinson
b59670f2bd omap2: set the ethaddr as well as the usbethaddr env var to ensure static MAC
The kernel gets the ethernet MAC from the ethaddr variable, the omap boards for
devices with USB based eth adapters just set the usbethaddr which doesn't appear
to get passed to the kernel. The same Raspberry Pi code sets both ethaddr and
usbethaddr so lets do that so linux (tested 4.13 and 4.14) get a static rather
than a random MAC address, while not regressing users of usbethaddr.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2017-12-02 18:32:58 -05:00