Commit graph

69632 commits

Author SHA1 Message Date
Simon Glass
90a9901764 test: Add some tests for setexpr
This command currently has no tests. Add some for basic assignment and the
integer operations.

Note that the default size for setexpr is ulong, which varies depending on
the build machine. So for sandbox on a 64-bit host, this means that the
default size is 64 bits.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Pali Rohár
4532bf411e Makefile: Correctly propagate failure when removing target
On more places is used pattern 'command > $@ || rm -f $@'. But it does not
propagate failure from 'command' as 'rm -f' returns success.

Fix it by calling 'false' to correctly propagate failure after 'rm -f'.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Patrick Delaunay
8558217153 gpio: Convert to use APIs which support live DT
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-12-01 10:33:37 -05:00
Lyle Franklin
c8e251f82a Adds basic support for ProxyDHCP
- ProxyDHCP allows a second DHCP server to exist alongside your main
  DHCP server and supply additional BOOTP related options
- When u-boot sends out a DHCP request, the real DHCP server will
  respond with a normal response containing the new client IP address
  while simultaneously the ProxyDHCP server will respond with a blank
  client IP address and a `bootfile` option
- This patch adds CONFIG_SERVERIP_FROM_PROXYDHCP (default false) to
  enable this behavior and CONFIG_SERVERIP_FROM_PROXYDHCP_DELAY_MS
  (default 100) which tells u-boot to wait additional time after
  receiving the main DHCP response to give the ProxyDHCP response time
  to arrive
- The PXE spec for ProxyDHCP is more complicated than the solution
  added here as diagramed on page 16:
  http://www.pix.net/software/pxeboot/archive/pxespec.pdf:

```
DHCP Discover will be retried four times. The four timeouts are 4, 8, 16
and 32 seconds respectively. If a DHCPOFFER is received without an Option
timeouts in an attempt to receive a PXE response.
```

- Adding a simple delay worked for my purposes but let me know if a
  more robust solution is required

Signed-off-by: Lyle Franklin <lylejfranklin@gmail.com>
2020-12-01 10:33:37 -05:00
Anton Leontiev
db3667413d cmd: pxe: Use internal FDT if retrieving from FDTDIR fails
As FDTDIR label doesn't specify exact file to be loaded, it should
not fail if no file exists in the directory. In this case try to boot
with internal FDT if it exists.

Signed-off-by: Anton Leontiev <aleontiev@elvees.com>
2020-12-01 10:33:37 -05:00
Tom Rini
0719bf4293 Prepare v2021.01-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 13:09:42 -05:00
Tom Rini
53def460d2 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 12:50:32 -05:00
Tom Rini
a7ab4b71d5 Merge tag 'mmc-2020-11-29' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- mmc minor update for better debug and error check
- fsl_esdhc sysctl set and make sure delay check for HS400
2020-11-29 11:12:59 -05:00
Tom Rini
fc4c2f7f85 Pull request for UEFI sub-system for efi-2021-01-rc3 (3)
The following errors are corrected:
 
 * Linux crash when accessing UEFI variables at runtime.
 * UEFI variable using standalone MM on 32 bit systems
   not working due to missing packing of communication
   structure
 * NULL dereference when FAT16 root directory is full
 * FAT files with a short file name starting with 0xE5 (0x05 in directory
   entry) where treated as deleted.
 
 The UEFI SetTime() service is enabled on ARM QEMU.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl/DPScACgkQxIHbvCwF
 GsQDhA/8CZAwTdKeXGkjaaQqDnU2rYS0D6HlQPeRFAjOC7bG2wD1WBEMz27j4on0
 3IgX/E9M3HVk2AtFHT/yOs3fhEXXZLONjciL5bppxZzfyYvhe/b3/GPy1BxjCSJ9
 8N0KohKU8xyGFCQjyyeBv3qnQV8m1WK7rIctFZ/0VZITvNCAdjRm0lcMBANQdG+B
 xlEmOUcPopNs01xmWBKwtZ5FXBb8dKo6+JZkRjBMN3PoBGzM53xiAn6Lv+coKr+c
 Z3DGgCpkOevSi6hYZZ2M5Dfe/Ar7fn4dInuxLjHaT05r7SRkmeqrFOSkvX7rKwa3
 IGpR+D6edb3qZ1XSiiqNLni/vxSVQFxWJwGFa50zk9pnCnD+lzUECLITOh5FD/Qb
 W9HK0lhgWzYX9+l+mrZ6XldhQhvSABa0B3Zxb9Y8+c2bfut04XuaKCtlJM3y83hu
 1AaNE5ClIU87sobn/jpdTiJSLz8F2rOSf7jVgdUmXP1Nc+q8vr+YzjDcM8BmGWrL
 k2Ku8npMkpn2JG1W7lwzlA5en6/+L5hAaujBo/jj1KlwUlNnfyVNVu/AZlK38Ug6
 7QIi7FJ7T4onRAkNqfzqfYlB2yvth1p/v3LomyGlkJgFCB+WW5aHVCK38/BlQ5jR
 Uf2uv7xX510vfct/wBYUAz3fp7S2l7K9Lf/dSNpgegiSSUe+5jc=
 =CgpH
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc3-3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc3 (3)

The following errors are corrected:

* Linux crash when accessing UEFI variables at runtime.
* UEFI variable using standalone MM on 32 bit systems
  not working due to missing packing of communication
  structure
* NULL dereference when FAT16 root directory is full
* FAT files with a short file name starting with 0xE5 (0x05 in directory
  entry) where treated as deleted.

The UEFI SetTime() service is enabled on ARM QEMU.
2020-11-29 11:12:49 -05:00
Ilias Apalodimas
6974a4a373 charset: make u16_strnlen accessible at runtime
commit 1fabfeef506c ("efi_loader: parameter check in GetNextVariableName()")
introduces a check using u16_strnlen(). This code is used on EFI
runtime variables as well, so unless we mark it as runtime, the kernel
will crash trying to access it.

Fixes: 1fabfeef506c ("efi_loader: parameter check in GetNextVariableName()")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:37 +01:00
Etienne Carriere
03699bc756 lib/efi_loader: fix ABI in efi_mm_communicate_header
Pack struct efi_mm_communicate_header as done in EDK2 as seen in
release 201808 [1]. If not packed sizeof() for the structure adds
4 additional bytes on 32bit targets which breaks the ABI.

Link: [1] https://github.com/tianocore/edk2/blob/edk2-stable201808/MdePkg/Include/Protocol/MmCommunication.h#L21
Fixes: 23a397d2e2 ("efi_loader: Add headers for EDK2 StandAloneMM communication")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-29 05:18:37 +01:00
Heinrich Schuchardt
31cadc3635 efi_loader: enable EFI_SET_TIME on sandbox and QEMU ARM
Enable EFI_SET_TIME on the sandbox and QEMU ARM to ensure that we compile
and test the relevant code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:37 +01:00
Heinrich Schuchardt
1ec29aa306 fs: fat: use ATTR_ARCH instead of anonymous 0x20
Using constants instead of anonymous numbers increases code readability.

Fixes: 704df6aa0a ("fs: fat: refactor write interface for a file offset")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:16 +01:00
Heinrich Schuchardt
a2c5a92d48 fs: fat: directory entries starting with 0x05
0x05 is used as replacement letter for 0xe5 at the first position of short
file names. We must not skip over directory entries starting with 0x05.

Cf. Microsoft FAT Specification, August 30 2005

Fixes: 39606d462c ("fs: fat: handle deleted directory entries correctly")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-29 05:18:16 +01:00
Heinrich Schuchardt
661d223868 fs: fat: avoid NULL dereference when root dir is full
When trying to create a file in the full root directory of a FAT32
filesystem a NULL dereference can be observed.

When the root directory of a FAT16 filesystem is full fill_dir_slot() must
return -1 to signal that a new directory entry could not be allocated.

Fixes: cd2d727fff ("fs: fat: allocate a new cluster for root directory of fat32")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:16 +01:00
Tom Rini
f6cf78dc6a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-i2c 2020-11-28 10:55:46 -05:00
Pragnesh Patel
f517e5fe98 riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controller
Enable support for SiFive FU540 Opencores I2C master controller.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-28 08:30:41 +01:00
Pragnesh Patel
b2d4cbe6d4 i2c: ocores: add i2c driver for OpenCores I2C controller
Add support for the OpenCores I2C controller IP core
(See http://www.opencores.org/projects.cgi/web/i2c/overview).

This driver implementation is inspired from the Linux OpenCores
I2C driver available.

Thanks to Peter Korsgaard <peter@korsgaard.com> for writing Linux
OpenCores I2C driver.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-28 08:30:41 +01:00
Simon Glass
942012246a i2c: designware_i2c: Don't warn if no reset controller
At present if CONFIG_RESET is not enabled, this code shows a warning:

  designware_i2c_ofdata_to_platdata() i2c_designware_pci i2c2@16,0:
	Can't get reset: -524

Avoid this by checking if reset is supported, first.

Fixes: 622597dee4 ("i2c: designware: add reset ctrl to driver")
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-28 08:30:41 +01:00
Baruch Siach
5a13c0d134 i2c: mvtwsi: disable i2c slave also on Armada 8k
The hidden I2C slave is also present on the Armada 8k AP806. Testing
shows that this I2C slave causes the same issues as Armada 38x.
Disabling that I2C slave fixes all these issues.

I2C blocks on the Armada 8k CP110 are not affected.

Extend the I2C slave disable to Armada 8k as well.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-11-28 08:17:16 +01:00
Jaehoon Chung
b3dc016caa mmc: check a return value about regulator's always-on
Regulator can be set to "always-on".
It's not error about enable/disable. It needs to check about
its condition.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-11-28 10:44:39 +08:00
Jaehoon Chung
58896458b7 mmc: display an error number to debug
It's useful to know an error number when it's debugging.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-11-28 10:43:42 +08:00
Yangbo Lu
8ee802f899 mmc: fsl_esdhc: make sure delay chain locked for HS400
For eMMC HS400 mode, the DLL reset is a required step for mmc rescan.
This step has not been documented in reference manual, but the RM will
be fixed sooner or later.

In previous commit to support eMMC HS400,
  db8f936 mmc: fsl_esdhc: support eMMC HS400 mode

the steps to configure DLL could be found in commit message,
  13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
  14. Wait for delay chain to lock.

these would be fixed as,
  13.   Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
  13.1  Write DLLCFG0[DLL_RESET] to 1 and wait for 1us,
        then write DLLCFG0[DLL_RESET]
  14.   Wait for delay chain to lock.

This patch is to add the step of DLL reset, and make sure delay chain
locked for HS400.

Fixes: db8f93672b ("mmc: fsl_esdhc: support eMMC HS400 mode")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-28 10:39:44 +08:00
Yangbo Lu
263ddfc345 mmc: fsl_esdhc: set sysctl register for clock initialization
The initial clock setting should be through sysctl register only,
while the mmc_set_clock() will call mmc_set_ios() introduce other
configurations like bus width, mode, and so on.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-28 10:39:44 +08:00
Sean Anderson
da12917060 mmc: Add some helper functions for retrying on error
All of the existing quirks add retries to various calls of mmc_send_cmd.
mmc_send_cmd_quirks is a helper function to do this retrying behavior. It
checks if quirks mode is enabled, and if a specific quirk is activated it
retries on error.

This also adds mmc_send_cmd_retry, which retries on error every time
(instead of if a quirk is activated).

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-28 10:39:44 +08:00
Tom Rini
7889951d0f - STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
 - Correct ALIGN macro usage for on syram for SPL dcache support
 - Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
 - Fix compilation issue for spl_mmc_boot_partition
 - Fix MTD partitions for serial boot
 - Add support of MCU HOLD BOOT with reset for stm32 remoteproc
   (prepare alligneent with  kernel DT)
 - Correct bias information and support in STM32 soc and STMFX
 - Support optional vbus in usbphyc
 - Update FIT examples to avoid kernel zImage relocation before decompression
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl++X0MACgkQ4rK92eCq
 k3UQTQf/VndEkKb/jWxvXPI69g0aGW1CgzkJrOyv5LzR7E7n16Y6sDjnHFqNwqrM
 5WWgft0KYY9zb3+Hk92ymD/Z7zKkIWDbp9FlFky3q7rcKe6mpNghtHS6VoiXwcRG
 gZro+bM/5QKZUpZOcDB6oRtlKx+IgvKYAtOeURK1zUOkoiwuzoRPYhyEdi/DFFG8
 y8ByGBj0SAkv//PKrF+XfS0F5eGJuBrncEfI3+iMtJI/P1fiP/UdySVUK58JkKMJ
 hEUwuR7RADL1F0cP7ZQSBOXksLyKf/DpdYt8J52hf1ml3H5BmhWb91sFK58RRw/v
 PBGbdoschACauAzbSdEh2sqp8dQG9A==
 =ox0A
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20201125' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue for spl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc
  (prepare alligneent with  kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompression
2020-11-25 11:00:52 -05:00
Patrick Delaunay
60a2dd6aa2 board: st: stm32mp1: update load address for FIT examples
Update kernel load address for FIT examples to avoid relocation:
- Kernel example uses Image.gz with U-Boot gzip decompression
  at final kernel location 0x0xC0008000.
- Copro example loads zImage at a correct location (0xC4000000),
  to avoid zImage relocation before decompression by kernel code.

An other solution to avoid zImage relocation is to align
the kernel load and entry address with the real location in FIT
(the relocation of zImage is skipped in U-Boot bootm command for
identical address) but it is less flexible because this offset
depends on FIT content:

For example:

## Loading kernel from FIT Image at c2000000 ...
   Using 'ev1' configuration
   Trying 'kernel' kernel subimage
     Description:  Linux kernel
     Created:      2020-10-22   9:08:32 UTC
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xc20000cc

The kernel offset in FIT is 0xCC in FIT and zImage is decompressed at
0xC0008000 by kernel code:

kernel {
	description = "Linux kernel";
	data = /incbin/("zImage");
	type = "kernel";
	arch = "arm";
	os = "linux";
	compression = "none";
	load = <0xC20000cc>;
	entry = <0xC20000cc>;
	hash-1 {
		algo = "sha1";
	};
};

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 14:27:19 +01:00
Patrick Delaunay
c480138958 phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off
This patch adds support for optional vbus regulator.
It is managed on phy_power_on/off calls and may be needed for host mode.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 12:02:58 +01:00
Patrick Delaunay
e27e96aa80 pinctrl: stmfx: update pin name
Update pin name to avoid duplicated name with SOC GPIO
gpio0...gpio15 / agpio0....agpio7: add a stmfx prefix.

This pin name can be used in pinmux command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 12:01:53 +01:00
Patrick Delaunay
c2a8181d45 pinctrl: stmfx: update pincontrol and gpio device name
The device name is used in pinmux command and in log trace
so it is better to use the parent parent name ("stmfx@42" for
example) than a generic name ("pinctrl" or "stmfx-gpio")
to identify the device instance.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 12:01:53 +01:00
Patrick Delaunay
2c6df94c83 gpio: stm32: correct the bias management
Use the bias configuration for all the GPIO configurations and not
only for input GPIO, as indicated in Reference manual
(Table 81. Port bit configuration table).

Fixes: 43efbb6a3e ("gpio: stm32: add ops get_dir_flags")
Fixes: f13ff88b61 ("gpio: stm32: add ops set_dir_flags")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 12:01:46 +01:00
Patrick Delaunay
b305dbc08b pinctrl: stm32: display bias information for all pins
Display the bias information for input gpios or AF configuration,
and not only for output pin, as described in Reference manual
(Table 81. Port bit configuration table).

Fixes: da7a0bb1f2 ("pinctrl: stm32: add information on pin configuration")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 12:01:46 +01:00
Patrick Delaunay
9ed6f929a3 remoteproc: stm32: update error management in stm32_copro_start
The coprocessor is running as soon as the hold boot is de-asserted.

So indicate this running state and save the resource table even
if the protective assert, to avoid autonomous reboot, is failed.

This error case should never occurs.

Cc: Fabien DESSENNE <fabien.dessenne@st.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 11:32:31 +01:00
Patrick Delaunay
5a536dfe33 remoteproc: stm32: use reset for hold boot
Use the reset function to handle the hold boot bit in RCC
with device tree handle with MCU_HOLD_BOOT identifier.

This generic reset allows to remove the two specific properties:
- st,syscfg-holdboot
- st,syscfg-tz

This patch prepares alignment with kernel device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Fabien DESSENNE <fabien.dessenne@st.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 11:32:31 +01:00
Patrick Delaunay
d8d29a4489 reset: stm32: Add support of MCU HOLD BOOT
Handle the register RCC_MP_GCR without SET/CLR registers
but with a direct access to bit BOOT_MCU:
- deassert => set the bit: The MCU will not be in HOLD_BOOT
- assert => clear the bit: The MCU will be set in HOLD_BOOT

With this patch the RCC driver handles the MCU_HOLD_BOOT_R value
added in binding stm32mp1-resets.h

Cc: Fabien DESSENNE <fabien.dessenne@st.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 11:32:31 +01:00
Patrick Delaunay
29e5c02788 board: stm32mp1: no MTD partitions fixup for serial boot
Remove the update of the MTD partitions in kernel device tree
for serial boot (USB / UART), and the kernel will use the MTD
partitions define in the loaded DTB because U-Boot can't known the
expected flash layout in this case.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-25 10:58:15 +01:00
Richard Genoud
40426d6f9a SPL: stm32mp1: fix spl_mmc_boot_partition not defined
spl_mmc_boot_partition is only defined when
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is defined.

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:56:09 +01:00
Marek Vasut
34d573fdab ARM: dts: stm32: Drop QSPI CS2 on DHCOM
The QSPI CS2 is not used on DHCOM, remove the pinmux and flash@1.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:52:09 +01:00
Marek Vasut
64af7c3110 ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
The uSD slot card-detect GPIO is connected to PG1, fix it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:50:44 +01:00
Marek Vasut
7d5164425b ARM: dts: stm32: Add DHCOM based PicoITX board
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:43:46 +01:00
Patrick Delaunay
77c077e171 arm: stm32mp: correct the ALIGN macro usage
Correct the ALIGN macro usage in mmu_set_region_dcache_behaviour
call: the address must use ALIGN_DOWN and size can use ALIGN macro.

With STM32_SYSRAM_BASE=0x2FFC0000 and MMU_SECTION_SIZE=0x100000 for
STM32MP15x the computed address was 30000000 instead of 2ff00000.

Fixes: 43fe9d2fda ("stm32mp1: mmu_set_region_dcache_behaviour")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:33:16 +01:00
Patrice Chotard
d5b0511391 ARM: dts: stm32: Fix typo in stm32h7-u-boot.dtsi
Fix typo "firsct"

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Patrice Chotard
183362947c ARM: dts: stm32: Fix timer initialization for stm32 MCU's board
Commit 4b2be78ab6 ("time: Fix get_ticks being non-monotonic")
puts in evidence that get_ticks is called before timer initialization.
Fix it by initializing timer before relocation.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Patrice Chotard
61c88ace4b ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
Device tree alignment with kernel v5.10-rc1.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Patrice Chotard
63185b0a32 ARM: dts: sync armv7-m.dtsi with kernel v5.10-rc1
Since kernel v4.8-rc1, commit 05b23ebc2bd9 ("ARM: dts: armv7-m: remove skeleton.dtsi include"),
skeleton.dtsi file is no more included.

This synchronization is needed to avoid to get 2 memory node
in DTB file if, in DTS file, memory node is declared with the correct
syntax as following:

	memory@90000000 {
 		device_type = "memory";
 		reg = <0x90000000 0x800000>;
 	};

Then in DTB, we will have the 2 memory nodes, which is incorrect and
cause misbehavior during DT parsing by U-boot:

	memory {
		device_type = "memory";
		reg = <0x00 0x00>;
	};

	memory@90000000 {
		device_type = "memory";
		reg = <0x90000000 0x800000>;
	};

Issue found when synchronizing MCU's STM32 DT from kernel v5.10-rc1.
When using fdtdec_setup_mem_size_base() or fdtdec_setup_memory_banksize()
API, first above memory node is found (with reg = <0x00 0x00>), so
gd->ram_size, gd->ram_base, gd->bd->bi_dram[bank].start and
gd->bd->bi_dram[bank].size are all set to 0 which avoid boards to boot.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Tom Rini
d361eafe82 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
- DWC2, DWC3 fixes
2020-11-22 11:00:11 -05:00
Tom Rini
6402887a9f Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh
- Assorted pinctrl updates
2020-11-22 10:59:49 -05:00
Jaehoon Chung
05dac23261 usb: gadget: dwc2_udc_otg: return zero when reset property is not present
If reset DT property is not present, -ENOENT is returned.
But it's not really error.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-22 13:18:20 +01:00
Siva Durga Prasad Paladugu
e7f9e1fca9 usb: dwc3: Handle case where setup_phy is not needed
If CONFIG_PHY is not enabled then the dwc3_setup_phy()
returns ENOTSUPP which can be still valid and intentional
so modify error check to handle this -ENOTSUPP.

The same error handling exists in drivers/usb/host/xhci-dwc3.c already
added by commit d648a50c0a ("dwc3: move phy operation to core.c").

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-22 13:18:20 +01:00
Patrick Delaunay
5739ef2bcb usb: dwc2: add "u-boot,force-vbus-detection" for stm32
On some board, the ID pin is not connected so the B session must be
overridden with "u-boot,force_b_session_valid" but the VBus sensing
must continue to be handle.

To managed it, this patch adds a new DT field
"u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-22 13:18:20 +01:00