Commit graph

137 commits

Author SHA1 Message Date
Tom Rini
9ba8b9bdd7 gw_ventana: Fix unused variable warnings
The variable nfc_pads is only referenced when CONFIG_CMD_NAND is set,
move the existing guard and drop a now redundant comment.  The variable
gwproto_gpio_pads is never referenced, remove it.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-12 08:37:26 -04:00
Simon Glass
0fd28b1f0e power: Drop CONFIG_I2C_PMIC
This is only used by one board and should not be a CONFIG option. Instead
it should use the driver model pmic framework. For now, just move the
setting into the only board that uses it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30 10:29:53 -04:00
Tim Harvey
d3a2bcf741 imx: ventana: add new board configs to MAINTAINERS
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-26 11:05:52 +02:00
Tim Harvey
d576d6f31c imx: ventana: fix GW5903 VDD_ARM rail
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-26 11:05:39 +02:00
Tim Harvey
214fb19bcc imx: ventana: add GW5903 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20 19:10:50 +01:00
Tim Harvey
94a1d6c602 imx: ventana: add GW560x support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20 19:10:39 +01:00
Tim Harvey
8d1a6ff825 imx: ventana: add GW5904 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20 19:10:22 +01:00
Tim Harvey
d883fcc6bb imx: ventana: add EMMC configuration
Prepare for boards with EMMC instead of NAND flash

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-19 17:39:59 +01:00
Tim Harvey
f3a8546b8f imx: ventana: make SD3_VSELECT board specific
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19 17:30:07 +01:00
Tim Harvey
f938500f2c imx: ventana: make OTG VBUS power enable board specific
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19 17:30:03 +01:00
Tim Harvey
db1964cad7 imx: ventana: fix hwconfig
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19 17:29:58 +01:00
Tim Harvey
095968f1b1 imx: ventana: change name of rs232_en to indicate polarity
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19 17:29:54 +01:00
Tim Harvey
65da5c3b65 imx: ventana: move mmc_init to common
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19 17:29:46 +01:00
Tim Harvey
ad68d7b88e imx: ventana: add additional DRAM configurations
- 64bit 8gB density (4GiB) IMX6DQ
- 64bit 4gB density (2GiB) IMX6SDL

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19 17:29:37 +01:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Fabio Estevam
edf0093732 mx6: ddr: Allow changing REFSEL and REFR fields
Currently MX6 SPL DDR initialization hardcodes the REF_SEL and
REFR fields of the MDREF register as 1 and 7, respectively for
DDR3 and 0 and 3 for LPDDR2.

Looking at the MDREF initialization done via DCD we see that
boards do need to initialize these fields differently:

$ git grep 0x021b0020 board/
board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800
board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */
board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800
board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4      0x021b0020 0x00005800
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800
board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800
board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800
board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800

So introduce a mechanism for users to be able to configure
REFSEL and REFR fields as needed.

Keep all the mx6 SPL users in their current REF_SEL and REFR values,
so no functional changes for the existing users.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
2016-09-06 18:22:48 +02:00
Tim Harvey
a5bfb4ff9e imx: ventana: add dt fixup for watchdog external reset
Added removal of the fsl,ext-reset-output property in the wdog node for board
revisions that pre-date the addition of the external watchdog reset signal.

This property is a recent addition to mainline linux kernel in order to
specify that the IMX watchdog external reset should be used instead of the
internal chip-level reset.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:18 +02:00
Tim Harvey
966fe02ee6 imx: ventana: refactor board-specific dt fixups (no functional change)
Re-factor the board-specific dt fixups so that they are easier to follow
and extend in the future:
 - use defines for DT paths
 - use switch/case per board
 - order models numerically

There is no functional change in the code

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:18 +02:00
Tim Harvey
5911c0924f imx: ventana: make hwconfig initialize based on board configuration
The hwconfig env var allows user to control hardware specific configuration
of board specific features but not all Ventana boards have the same features.

We will use the magic default value of "_UNKNOWN_" to signify that the
bootloader should create this based on detected board model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:18 +02:00
Tim Harvey
e86b7adfa3 imx: ventana: add extra DIO's for GW5520
The GW5520 has 10 DIO's instead of the typical 4 found on the Ventana
product family.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:18 +02:00
Tim Harvey
1800ffa83e imx: ventana: make number of digital I/O's dynamic
Replace the static list of board-specific digital I/O's with a dynamic list.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:18 +02:00
Tim Harvey
e49621b357 imx: ventana: make RS232 enable board specific
Not all Ventana boards have an RS232 transceiver, make it board specific.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:17 +02:00
Tim Harvey
5c34c2abb8 imx: ventana: add dt fixup for eth1 mac-address
Ventana boards with a PCI Marvell Sky2 GigE MAC require the MAC address to
be placed in a DT node in order for the mainline linux driver to obtain it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:16 +02:00
Tim Harvey
5a08ad6fdc imx: ventana: add dt fixup for GW16082 irq mapping
The GW16082 mini-PCI expansion mezzanine uses a TI XIO2001 PCIe-to-PCI
bridge with legacy INTA/B/C/D interrupts. These interrupts are assigned
in the reverse order according to the PCI spec.

If the TI bridge is found on the Ventana PCI bus, add device-tree nodes
according to bus enumeration explicitly defining the interrupt mapping
to override the default PCI mapping in the Linux kernel. This allows
the GW16082 to work with upstream kernels that support device-tree
irq parsing.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28 13:27:16 +02:00
Tom Rini
3fc304b8d7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-06-12 12:51:34 -04:00
Tim Harvey
34b080b79c imx: ventana: add fdt fixup to enable UHS-I support on selected boards
UHS-I support is available on Ventana boards with micro-SD sockets depending
on the board revision. For backwards compatibility to not break users
who have old bootloaders and newer kernels the device-tree on boards with
microSD disables UHS-I support by default by defining the no-1-8-v property
in the esdhc controller node. For models/revisions that support switchable
1.8V/3.3V I/O which is detectable by the presence of a pull-down on the
SD3_VSELECT pin we remove that property to enable support in the kernel.

Additionally we add SD3_VSELECT to the pinmux for clarity (even though U-Boot
does not currently support UHS-I modes requiring 1.8V I/O).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:27 +02:00
Tim Harvey
385575bcb6 imx: ventana: add GW553x support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:12 +02:00
Tim Harvey
fe63fcb6ca imx: ventana: remove several EEPROM config bit dependence
Removed several EEPROM bit dependencies:
 - for dt aliases that don't exist and thus don't ever do anything
   (pcie,lvds1,uart*,vpu,csi*,hdmi_in,hdmi_out,cvbs_in,cvbs_out,gps)
 - for features that don't effect bus ordering or have no detrimental affect
   if erroneously enabled when not present (ahci,nand,i2c*)
 - for features that have little to no impact on being erroneously enabled
   but high impact if erroneously disabled (can*, spi*)
 - for features that have an high adverse affect of not being set when they
   should and no adverse affect of being set when they
   shouldn't (ipu*).

Removing these means the following:
 - these no longer are supported with the econfig command
 - these no longer affect the device-tree in any way

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:00 +02:00
Tim Harvey
5c55572ff7 imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit
The MSATA feature is a board-specific feature on Gateworks Ventana boards.

In most cases a 2:1 mux will steer either PCIe or SATA to a miniPCIe socket
through an MSATA_EN gpio. In these such cases assign the gpio in the board
specific struct and use its presence to determine if we default the GPIO to
PCIe and if we later steer it according to hwconfig.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:47 +02:00
Tim Harvey
f17a9af846 imx: ventana: enable pwm device-tree property based on hwconfig
Most Ventana boards have a connector with off-board digital-I/O signals
including some that can be pinmuxed as either a PWM or a GPIO. The hwconfig
env variable is used to configure these and they will be pinmuxed according
to this configuration in the bootloader.

This patch adds a device-tree fixup that will enable the pwm controller
nodes appropriately for digital-I/O's that are configured as pwm via hwconfig
so that the pin can be used with the Linux kernel /sys/class/pwm API.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:31 +02:00
Tim Harvey
83e00f193e imx: ventana: fix invalid dio configuration for pwm mode
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:16 +02:00
Tim Harvey
7853262330 imx: ventana: export backlight gpio after gpio driver is available
Calling request_gpio to register bklt_gpio with the GPIO driver had no effect
in setup_display called from early board init (although pinmuxing it and
configuring it as output-low does do what it should). Therefore move the
request_gpio later in enable_lvds so that its registered for use by the
gpio command if LVDS is actually enabled.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:02 +02:00
Tim Harvey
ca628b74c9 imx: ventana: gsc: show board temp on boot
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:46 +02:00
Tim Harvey
82a17e75da imx: ventana: gsc: fix negative temperature readings
The GSC Temperature sensor is a 2's complement value - adjust accordingly
for negative temperatures.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:30 +02:00
Tim Harvey
efa7ed7236 imx: ventana: gsc: add gsc sleep command
The Gateworks System Controller on Ventana boards has the ability to
disable the board's primary power supply until the RTC hits a specific
time. When sleeping a button-down event on the GSC user pushbutton will
wake the board before it's wake time has been reached. This feature is
referred to as GSC sleep.

Add a command to invoke sleep mode for a specified number of seconds.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:15 +02:00
Tim Harvey
6052b1c6f4 imx: ventana: SPL: added support for 32bit IMX6DQ 8Gb density DRAM config
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:00 +02:00
Tim Harvey
1b99103fba imx: ventana: SPL: only disable boot watchdog if Falcon mode
If not booting Falcon mode, leave the boot watchdog enabled as a work-around
for other non-resolved bootloader hangs.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:23:46 +02:00
Robert P. J. Day
7ffe3cd62e Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUP
Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT:

  config OF_BOARD_SETUP
          bool "Set up board-specific details in device tree before boot"
          depends on OF_LIBFDT
          ...

remove superfluous tests of CONFIG_OF_LIBFDT when testing for
CONFIG_OF_BOARD_SETUP.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
[trini: Typo fix: s/ifdefi/ifdef/]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:16 -04:00
Tim Harvey
3c0fd17f61 imx: ventana: use EEPROM register for falcon boot mode
NAND+MMC env support costs 12KB in the SPL which is fairly expensive just
for the ability to specify whether or not to boot to uboot or directly
to linux. The Ventana boards have plenty of EEPROM storage so we will use
a byte there to signify if we should boot to the bootloader or to the OS.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Tim Harvey
a419352daf imx: ventana: gsc: remove dependence on env
remove dependence on getenv() by using global board info struct for model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Marek Vasut
18e02ffe5e arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit definitions
The following patch changed the PFUZE100 swbst register bit definitions
and broke PMIC configuration on multiple boards, at least on the novena
and gw_ventana. This patch fixes it.

commit 8fa46350a4
Author: Peng Fan <Peng.Fan@freescale.com>
Date:   Fri Aug 7 16:43:45 2015 +0800

    power: regulator: add pfuze100 support

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Vagrant Cascadian <vagrant@aikidev.net>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
Tested-by: Vagrant Cascadian <vagrant@aikidev.net>
Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2015-12-01 16:09:51 +01:00
Fabio Estevam
346d106d16 gw_ventana: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2015-11-12 17:26:34 +01:00
Peng Fan
f20562e4c4 mx6: remove SYS_SOC from board Kconfig
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-09-13 10:37:29 +02:00
Peng Fan
f2ff834365 imx: mx6: ddr init MMDC according to ddr_type
To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg
to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper.
The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg
when ddr_type is for DDR3. Later we can use ddr_type to initialize
MMDC for LPDDR2.

Initialize ddr_type for different boards which enable SPL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-09-02 15:34:12 +02:00
Tim Harvey
c2fd3f5704 imx: ventana: skip mtdparts fixup if no flash
This avoids an error message on NAND-less boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
fdead4be6a imx: ventana: hang if board model could not be determined
If the EEPROM could not be read or is corrupt we always want to hang.
Note that an error message will have been displayed by read_eeprom in this
case.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
80d1a3ee72 imx: ventana: make fdt_file1 and fdt_file2 automatic and non-overridable
The fdt_file1 and fdt_file2 vars provide fallbacks for the fdt file loading
script. There is no need to allow the user to override these as if they
want to specify the fdt, they should do so in the first attempt which is
the fdt_file var.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
40c746758c imx: ventana: make model env var automatic and non-overridable
We want to model env var to always reflect what was in the EEPROM. There
is no point in allowing a user to override this.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
9a83a81545 imx: ventana: various board-specific GPIO config updates
- Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x)
- Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is
  done regardless of USB being initialized in bootloader
- Added usb_sel iomux/hwconfig for GW552x
- Fixed mezzanine DIO for GW54xx
- Fixed PANLEDR# for GW54xx
- Fixed dio iomux/hwconfig for GW552x
- Fixed dio iomux for GW551x
- removed redundant #define

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00