Commit graph

502 commits

Author SHA1 Message Date
Gabe Black
8313315b9a x86: Initialise SPI if enabled
If we have SPI support, make sure that we init it.

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vic Yang <victoryang@chromium.org>
2012-12-06 14:30:41 -08:00
Gabe Black
ac31a7b81c x86: Implement arch_phys_memset so that it can wipe memory above 4GB
Implement arch_phys_memset so that it can set memory at physical addresses
above 4GB using PAE paging. Because there are only 5 page tables in PAE mode,
1 PDPT and 4 PDTs, those tables are statically allocated in the BSS. The
tables must be 4K page aligned and are declared that way, and because U-Boot
starts as 4K aligned and the relocation code relocates it to a 4K aligned
address, the tables work as intended.

While paging is turned on, all 4GB are identity mapped except for one 2MB
page which is used as the window into high memory. This way, U-Boot will
continue to work as expected when running code that expects to access memory
freely, but the code can still get at high memory through its window.

The window is put at 2MB so that it's 2MB page aligned, low in memory to be
out of the way of things U-Boot is likely to care about, and above the lowest
1MB where lots of random things live.

Signed-off-by: Gabe Black <gabeblack@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:41 -08:00
Gabe Black
ec516c4899 x86: Increase the size of the phys_size_t and phys_addr_t types
These types should be 64 bits long to reflect the fact that physical
addresses and the size of physical areas of memory are more than 32 bits
long.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:40 -08:00
Duncan Laurie
0c3929092d x86: Fix off-by-one error in do_elf_reloc_fixups()
The use of post-increment with a do-while loop results in
the loop going one step too far when handling relocation fixups.

In about 1/100 cases this would cause it to hang.

Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:40 -08:00
Duncan Laurie
984d8b09fb x86: Ignore memory >4GB when parsing Coreboot tables
U-boot is unable to actually use that memory and it can
cause problems with relocation if it tries to.

Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:40 -08:00
Simon Glass
1484311286 x86: Fix indirect jmp warning in zimage.c
This fixes the following warning:

zimage.c:312: Warning: indirect jmp without `*'

Also fixed these warnings to keep checkpatch quiet:

warning: arch/x86/lib/zimage.c,311: unnecessary whitespace before a quoted newline
warning: arch/x86/lib/zimage.c,312: unnecessary whitespace before a quoted newline
warning: arch/x86/lib/zimage.c,313: unnecessary whitespace before a quoted newline

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:40 -08:00
Stefan Reinauer
17de114f9f x86: Clean up MTRR 7 right before jumping to the kernel
This cleans up the rom caching optimization implemented in coreboot (and
needed throughout U-Boot runtime).

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Graeme Russ
98568f0fa9 x86: Import MSR/MTRR code from Linux
Imported from Linux 3.1 with a few modifications to suit U-Boot

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Stefan Reinauer
61e0ea900a x86: Provide a function to clean up just before booting a zimage
This function can be used by boards which want to do some clean-up
before booting a zImage.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Stefan Reinauer
095593c030 x86: Add basic cache operations
Add functions to enable/disable the data cache.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Gabe Black
9a7da182fa x86: Fill in the dram info using the e820 map on coreboot/x86
This way when that dram "banks" are displayed, there's some useful information
there. The number of "banks" we claim to have needs to be adjusted so that it
covers the number of RAM e820 regions we expect to have/care about.

This needs to be done after "RAM" initialization even though we always run
from RAM. The bd pointer in the global data structure doesn't automatically
point to anything, and it isn't set up until "RAM" is available since, I
assume, it would take too much space in the very constrained pre-RAM
environment.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Vadim Bendebury
3cdc18a8de x86: Add a CBMEM timestamp generated right before the kernel startup.
To maintain the initialization state of the timestamp facility, thesq
pointer to the CBMEM section containing the timestamp table should be
kept in the .data section (so that it is maintained across u-boot
relocation).

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Vadim Bendebury
6dbe0cce3f x86: Enable coreboot timestamp facility support in u-boot.
This change turns on the code which allows u-boot to add
timestamps to the timestamp table created by coreboot.

Since u-boot does not use the tsc_t like structure to represent
HW counter readings, this structure is being replaced by 64 bit
integer.

The timestamp_init() function is now initializing the base timer
value used by u-boot to calculate the HW counter increments.

Timestamp facility is initialized as soon as the timestamp table
pointer is found in the coreboot table. The u-boot generated
timer events' ID will start at 1000 to clearly separate u-boot
events from coreboot events in the timer trace.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:38 -08:00
Vadim Bendebury
2f899e03a9 x86: Add function to read time stamp counter
Put this function in the u-boot-x86.h header file. We could instead create
timer.h perhaps.

We support setting a base time, and reading the time relative to this base.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:38 -08:00
Bill Richardson
55ae10f8db x86: gpio: Add GPIO driver for Intel ICH6 and later.
Implement <asm-generic/gpio.h> functions for Intel ICH6 and later.
Only GPIOs 0-31 are handled by this code.

Signed-off-by: Bill Richardson <wfrichar@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:38 -08:00
Stefan Reinauer
339c511106 x86: Don't spam POST80 codes with slow IO functions
This patch prevents u-boot from "spamming" random progress codes on
a port 80 "post card".
The previous version of this patch just removed the delays in the "slow"
IO functions, as they do not need to be slow, however, this patch is
less intrusive.

It uses another unused port that is often used by BIOSes (and the Linux
Kernel) for small delay timing purposes.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:05 -08:00
Stefan Reinauer
5b1be1bd01 x86: Fix typo in pcat_timer.c
Fix a small comment typo.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:05 -08:00
Gabe Black
687c108b10 x86: Include types.h explicitly in the i386 version of io.h
The i386 version of io.h depends on the phys_addr_t type which is defined in
types.h. It wasn't including that explicitly, and was working presumably
because the other files including it had already included types.h themselves
directly or indirectly. This change fixes that.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:05 -08:00
Gabe Black
452b80ef8c x86: Add a dummy implementation for timer_get_us
The microsecond timer is not currently implemented, but add a dummy
implementation for now.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:05 -08:00
Gabe Black
f30fc4de41 x86: Add a default implementation for cleanup_before_linux()
This function provides an opportunity for some last minute cleanup and
reconfiguration before control is handed over to Linux. It's possible this
may need to do something in the future, but for now it's left empty. It's set
up as a weak symbol so it can be overridden if necessary on a case by case
basis.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:04 -08:00
Gabe Black
028a56289a x86: Add an fdt pointer to the global data structure
This change adds a pointer to the global data structure in x86 to point to
the device tree. This mirrors an identical pointer in ARM.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:04 -08:00
Gabe Black
5b5ece9ef4 x86: Allow compiling out realmode/bios code
We don't want this for coreboot, so provide a way of compiling it out.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:04 -08:00
Simon Glass
402ed0048a x86: coreboot: Decode additional coreboot sysinfo tags
Add support for decoding tags for GPIOs, compile/build info, cbmem and
other features.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Gabe Black <gabeblack@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:03 -08:00
Stefan Reinauer
93c1735f41 x86: coreboot: Drop sysinfo.c
sysinfo.c only contains the lib_sysinfo data structure which
is used/filled by tables.c. This split was introduced by importing
code from libpayload originally, but to keep the code simple, add
the single line of actual code to tables.c

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:03 -08:00
Gabe Black
82e73f0e3d x86: coreboot: Implement recursively scanning PCI busses
A hook is installed to configure PCI bus bridges as they encountered by u-boot.
The hook extracts the secondary bus number from the bridge's config space and
then recursively scans that bus.

On Coreboot, the PCI bus address space has identity mapping with the
physical address space, so declare it as such to ensure that the "pci_map_bar"
function used by some PCI drivers is behaving properly. This fixes the
EHCI PCI driver initialization on Stumpy.

This was tested as follows:

Ran the PCI command on Alex, saw devices on bus 0, the OXPCIe 952 on
bus 1, and empty busses 2 through 5. This matches the bridges
reported on bus 0 and the PCI configuration output from coreboot.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:05 -08:00
Gabe Black
452f50f7cf x86: coreboot: Tell u-boot about PCI bus 0 when initializing
U-boot needs a host controller or "hose" to interact with the PCI busses
behind them. This change installs a host controller during initialization of
the coreboot "board" which implements some of X86's basic PCI semantics. This
relies on some existing generic code, but also duplicates a little bit of code
from the sc520 implementation. Ideally we'd eliminate that duplication at some
point.

It looks like in order to scan buses beyond bus 0, we'll need to tell u-boot's
generic PCI configuration code what to do if it encounters a bridge,
specifically to scan the bus on the other side of it.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2012-11-28 11:40:04 -08:00
Stefan Reinauer
badcb343d7 x86: coreboot: Move non-board specific files to coreboot arch directory
coreboot.c and coreboot_pci.c don't contain board specific but only
coreboot specific code. Hence move it to the coreboot directory in
arch/x86/cpu (which should probably be moved out of cpu/ in another
commit)

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:04 -08:00
Gabe Black
c953fbee54 x86: Add some missing includes
I suspect these includes were usually available because something else
included them earlier or because they were brought in transitively.

Change-Id: I6aae2ac94dc792eac6febb4345e8125f69f70988
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:04 -08:00
Gabe Black
b16f521a5e x86: Allow excluding reset vector code from u-boot
When running from coreboot we don't want this code.

This version works by ifdef-ing out all of the code that would go
into those sections and all the code that refers to it. The sections are
then empty, and the linker will either leave them empty for the loader
to ignore or remove them entirely.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Simon Glass
8a487a4417 x86: Add initial memory barrier macros
These are available on other architectures, so add them on x86.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Graeme Russ
8abebe3ead x86: Add ilog2 to bitops
ilog2 is required by AHCI driver

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Graeme Russ
c73c6de60c x86: Remove duplicate PCI init
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Graeme Russ
8d61625d6a x86: Put global data on the stack
Putting global data on the stack simplifies the init process (and makes it
slightly quicker). During the 'flash' stage of the init sequence, global
data is in the CAR stack. After SDRAM is initialised, global data is copied
from CAR to the SDRAM stack

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Graeme Russ
e4fb611649 x86: Forward declare gd_t
So it can be used as a type in struct global_data and remove an ugly typecast

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2012-11-28 11:40:03 -08:00
Marek Vasut
8b493a5236 common: Discard the __u_boot_cmd section
The command declaration now uses the new LG-array method to generate
list of commands. Thus the __u_boot_cmd section is now superseded and
redundant and therefore can be removed. Also, remove externed symbols
associated with this section from include/command.h .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Marek Vasut
556751427b common: Add .u_boot_list into all linker files
Add section for the linker-generated lists into all possible linker
files, so that everyone can easily use these lists. This is mostly
a mechanical adjustment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Simon Glass
55f97c1bfb x86: Change global data baudrate to int
This doesn't need to be a long, so change it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:46 -07:00
Marek Vasut
036036d79c serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:59 -07:00
Mike Frysinger
47fde91f0c global_data: unify global flag defines
All the global flag defines are the same across all arches.  So unify them
in one place, and add a simple way for arches to extend for their needs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 21:46:32 +02:00
Mike Frysinger
de30122bb5 net: move bootfile init into eth_initialize
All arches init this the same way, so move the logic into the core
net code to avoid duplicating it everywhere else.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:33 -05:00
Mike Frysinger
50a47d0523 net: punt bd->bi_ip_addr
This field gets read in one place (by "bdinfo"), and we can replace
that with getenv("ipaddr").  After all, the bi_ip_addr field is kept
up-to-date implicitly with the value of the ipaddr env var.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:05 -05:00
Mike Frysinger
ae806cc6ab sc520: fix build warning about unused temp var
Building the eNET_SRAM board fails for me:
	sc520_timer.c: In function 'sc520_udelay':
	sc520_timer.c:81:7: error: variable 'temp' set but not used
		[-Werror=unused-but-set-variable]
	cc1: all warnings being treated as errors
	make[1]: *** [sc520_timer.o] Error 1

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-06 21:05:18 +11:00
Graeme Russ
a1d57b7aba x86: Convert board_init_f_r to a processing loop
Create an init function array for board_init_f_r - This finalises the
migration to a purely array based initialisation mechanism

Also tweak a few comments while we are at it so everything is 'correct'

--
Changes for v2:
 - Renamed to a more apt name
 - Fix bug in set_reloc_flag_r
 - Re-instate gd->flags = boot_flags; in board_init_f
 - Added commit message
2012-01-04 22:53:14 +11:00
Graeme Russ
d47ab0ecde x86: Split init functions out of board.c
This patch moves towards reducing board.c to simply a set of init cores for
the three initialisation phases (Flash, Flash/RAM, and RAM), a set of three
init function arrays and a init function array processing function
2012-01-04 22:41:32 +11:00
Graeme Russ
b156ff09aa x86: Move relocation code out of board.c 2012-01-04 22:39:06 +11:00
Graeme Russ
8e18e6e173 x86: Move setup_pcat_compatibility() out of board.c
This function simply does not belong in board.c

--
Changes for v2:
 - Added commit message
2012-01-04 22:37:20 +11:00
Graeme Russ
d13640b7c4 x86: Move do_go_exec() out of board.c
--
Changes for v2:
 - None
2012-01-04 22:35:20 +11:00
Graeme Russ
b843f31193 CHECKPATCH: arch/x86/lib/* 2012-01-04 22:33:59 +11:00
Graeme Russ
58c7a6751d x86: Tweak IDT and GDT for alignment and readability
--
Changes for v2:
 - Renamed to better reflect nature of changes
2012-01-04 22:29:40 +11:00
Graeme Russ
98f1fa9fd4 x86: Allow cache before copy to RAM
--
Changes for v2:
 - None
2012-01-04 22:25:53 +11:00
Graeme Russ
d653244b12 x86: Create weak init_cache() and default enable_caches() functions
--
Changes for v2:
 - Tweaked commit title
2012-01-04 22:19:01 +11:00
Graeme Russ
3766bb33a5 x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot
--
Changes for v2:
 - None
2012-01-04 22:18:36 +11:00
Graeme Russ
9e6c572ff0 x86: Use fs for global data
Use the base address of the 'F' segment as a pointer to the global data
structure. By adding the linear address (i.e. the 'D' segment address) as
the first word of the global data structure, the address of the global data
relative to the 'D' segment can be found simply, for example, by:

	fs movl 0, %eax

This makes the gd 'pointer' writable prior to relocation (by reloading the
Global Desctriptor Table) which brings x86 into line with all other arches

NOTE: Writing to the gd 'pointer' is expensive (but we only do it
twice) but using it to access global data members (read and write) is
still fairly cheap

--
Changes for v2:
 - Rebased against changes made to patch #3
 - Removed extra indent
 - Tweaked commit message
2012-01-04 22:17:24 +11:00
Graeme Russ
240ab5aa21 x86: Rework relocation calculations
This commit introduces no functional changes - It simply re-arranges the
calculations so that adding to them in future commits will be cleaner

--
Changes for v2:
 - Fixed typo in title
 - Added commit message
2012-01-04 22:17:22 +11:00
Graeme Russ
f48dd6fc6c x86: Simplify Flash-to-RAM code execution transition
Move the relocation offset calculation out of assembler and into C. This
also paves the way for the upcoming init sequence simplification by adding
the board_init_f_r flash to RAM transitional function

--
Changes for v2:
 - Added commit message
 - Minor adjustment to new stack address comment
2012-01-04 22:17:20 +11:00
Graeme Russ
74bfbe1ba5 x86: Rework Global Descriptor Table loading
The inline assembler is ugly and uses hard coded magic numbers. Make it more
elegant to allow cleaner implementation of future GDT related patches. The
compiler seems smart enough to generate the same code anyway

--
Changes for v2:
 - Rebased against revised patch #3
 - Use GDT size define instead of magic number
 - Added commit message
2012-01-04 22:17:19 +11:00
Graeme Russ
109ad143f8 x86: Remove GDR related magic numbers
--
Changes for v2:
 - Use an enum
 - Add defined for GDT size (previously added in patch 7)
 - Use X86_ namespace (as per Linux headers)
2012-01-04 21:05:09 +11:00
Graeme Russ
1176a7067a x86: Speed up copy-to-RAM and clear BSS operations
The implementations of memcpy and memset are now the optimised versions
from glibc, so use them instead of simple copy loops

--
Changes for v2:
 - Removed unneeded brackets
2012-01-04 21:05:00 +11:00
Graeme Russ
b2c2a03842 x86: Import glibc memcpy implementation
Taken from glibc version 2.14.90

--
Changes for v2:
 - None
2012-01-02 03:58:46 +11:00
Gabe Black
6f9d9986d5 x86: Add support for specifying an initrd with the zboot command
This change finishes plumbing the initrd support built into the zboot
mechanism out to the command interface.

It also fixes a bug in the command declaration where the kernel size could
be passed as an optional second parameter but not enough arguments were
allowed.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19 13:26:17 +11:00
Gabe Black
69370d144a x86: Refactor the zboot innards so they can be reused with a vboot image
If vboot successfully verifies a kernel, it will leave it in place and
basically ready to boot. The zeropage table which is part of the x86 boot
protocol is at the end of the kernel, though, instead of the beginning, and
because the image is already in place there's no need to copy it around.
This change refactors the code which implements the zboot command so that
the configuration of the zeropage table and loading the pieces of the
kernel into memory are done separately. Also, because the command line goes
before the zeropage table in vboot which is somewhat incompatible with the
normal protocol, where to put the command line is a now a parameter instead
of being hard coded.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19 13:26:16 +11:00
Gabe Black
f08fa7a201 x86: Add infrastructure to extract an e820 table from the coreboot tables
Also approximate the size of RAM using the largest RAM address available
in the tables. There may be areas which are marked as reserved which are
actually at the end of RAM.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19 13:26:16 +11:00
Gabe Black
233dbc1194 x86: Add support for booting Linux using the 32 bit boot protocol
This change conditionally modifies the zboot command so that it can use the
32 bit boot protocol. This is necessary because the 16 bit realmode entry
point assumes that it can call BIOS services which neither coreboot nor
u-boot provide.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19 13:26:16 +11:00
Gabe Black
d3a2bc3fd1 x86: Clean up the x86 zimage code in preparation to extend it
This change cleans up some formatting issues in the zimage handling code, and
converts it from using offsets added to a base pointer to using the available
structure definitions which were already being included.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19 13:26:16 +11:00
Gabe Black
63f559cd12 x86: Import code from coreboot's libpayload to parse the coreboot table
This change also forces the lib_sysinfo structure to be in the .data
section. Otherwise it ends up in the .bss section. U-boot assumes that it
doesn't need to copy it over during relocation, and instead fills that
whole section with zeroes. If we really were booting from ROM that would be
appropriate, but we need some information from the coreboot tables (memory
size) before then and have to fill that structure before relocation. We
skirt u-boot's assumption by putting this in .data where it assumes there
is still read only but non-zero data.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19 13:26:15 +11:00
Gabe Black
ef5a5b0049 x86: Initial commit for running as a coreboot payload
Add a target for running u-boot as a coreboot payload in boards.cfg, a
board, CPU and a config. This is a skeleton implementation which always
reports the size of memory as 64 MB.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19 13:26:15 +11:00
Gabe Black
36b2409a3d x86: Wrap small helper functions from libgcc to avoid an ABI mismatch
When gcc compiles some 64 bit operations on a 32 bit machine, it generates
calls to small functions instead of instructions which do the job directly.
Those functions are defined in libgcc and transparently provide whatever
functionality was necessary. Unfortunately, u-boot can be built with a
non-standard ABI when libgcc isn't. More specifically, u-boot uses
-mregparm. When the u-boot and libgcc are linked together, very confusing
bugs can crop up, for instance seemingly normal integer division or modulus
getting the wrong answer or even raising a spurious divide by zero
exception.

This change borrows (steals) a technique and some code from coreboot which
solves this problem by creating wrappers which translate the calling
convention when calling the functions in libgcc. Unfortunately that means
that these instructions which had already been turned into functions have
even more overhead, but more importantly it makes them work properly.

To find all of the functions that needed wrapping, u-boot was compiled
without linking in libgcc. All the symbols the linker complained were
undefined were presumed to be the symbols that are needed from libgcc.
These were a subset of the symbols covered by the coreboot code, so it was
used unmodified.

To prevent symbols which are provided by libgcc but not currently wrapped
(or even known about) from being silently linked against by code generated
by libgcc, a new copy of libgcc is created where all the symbols are
prefixed with __normal_. Without being purposefully wrapped, these symbols
will cause linker errors instead of silently introducing very subtle,
confusing bugs.

Another approach would be to whitelist symbols from libgcc and strip out
all the others. The problem with this approach is that it requires the
white listed symbols to be specified three times, once for objcopy, once so
the linker inserts the wrapped, and once to generate the wrapper itself,
while this implementation needs it to be listed only twice. There isn't
much tangible difference in what each approach produces, so this one was
preferred.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-29 21:31:24 +11:00
Gabe Black
dbaef6ef33 x86: Import the glibc memset implementation
The new implementation is about twice as fast as the old. This is from
glibc-2.14, sysdeps/i386/memset.c.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-29 21:31:17 +11:00
Gabe Black
60a9b6bfdd x86: Fix a few recently added bugs
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:30:51 +11:00
Gabe Black
769db03a4a x86: Don't relocate symbols which point to things that aren't relocated
This change adds an upper bound for symbols which are fixed up after u-boot
is relocated into RAM. This way portions that are left at their original
location can be referred to without having to manually fix up any pointers.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-29 21:30:44 +11:00
Gabe Black
03228b26d5 x86: Fix how the location of the realmode and bios blobs are calculated
There are two blobs embedded into the u-boot image which are linked to run
at an address which is different from where they actually end up in the
ROM, one called "realmode" and one called "bios". There are realmode_setup
and bios_setup functions which prepare those blobs by copying them into the
location they're supposed to run from, among other things.

During u-boot relocation from ROM to RAM, the text and a few data segments
are copied over. The realmode and bios sections are not copied, and so the
only place they can be read from is their original location in the ROM.
Looking specifically at the bios blob, there are symbols defined in the
linker script called __bios_start and __bios_size which are defined to be
the start and size of the blob in the ROM.

In the bios_setup function, there seem to be two mistakes happening. First,
the offset from ROM to RAM is being added to __bios_start which implies that
this code expects to use the copy moved to RAM. No such copy is made, so
that's wrong. More subtly, when u-boot relocates itself, it goes through
all of the relocations stored in .rel.dyn and fixes them up. This has the
effect of transforming the __bios_start reference in bios_setup so that it
refers to the version in RAM (if one existed) instead of the one in ROM. To
correct for that, the offset actually needs to be subtracted out again to
translate the address back into the ROM.

The net effect is that for both blobs, a + needs to be changed to a -.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-29 21:30:38 +11:00
Graeme Russ
2f0e0cd246 x86: Misc cleanups
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:10:12 +11:00
Graeme Russ
1cfcf03701 x86: Misc PCI touchups
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:10:08 +11:00
Graeme Russ
303418cc97 x86: Ensure IDT and GDT remain 16-byte aligned post relocation
Some CPUs have strict alignment requirements for these tables

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:10:01 +11:00
Graeme Russ
a76fc70ee1 x86: Provide more configuration granularity
Planned future ports requires more granularity for some options

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:09:52 +11:00
Graeme Russ
a206cc2343 x86: Add multiboot header
By adding a multiboot header, U-Boot can be loaded by GRUB2. Using GRUB2 to
bootstrap U-Boot is useful for using an existing BIOS to get an initial
U-Boot port up and running before implementing the low-level reset vector
code, SDRAM init, etc. and overwriting the BIOS

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:08:02 +11:00
Graeme Russ
311b1a2b38 sc520: Create arch asm-offsets
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:07:42 +11:00
Graeme Russ
facc9e7bf4 x86: Punt cold- and warm-boot flags
Nobody uses them anyway

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-29 21:04:06 +11:00
Graeme Russ
83088afbba cosmetic: checkpatch cleanup of arch/x86/lib/*.c
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:03:43 +11:00
Graeme Russ
01a0f5a1eb cosmetic: checkpatch cleanup of arch/x86/cpu/sc520/*.c
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:01:26 +11:00
Graeme Russ
717979fdd7 cosmetic: checkpatch cleanup of arch/x86/cpu/*.c
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:01:21 +11:00
Graeme Russ
6d7404c4c1 x86: Call hang() on unrecoverable exception
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:01:13 +11:00
Wolfgang Denk
cca4e4aec1 Reduce build times
U-Boot Makefiles contain a number of tests for compiler features etc.
which so far are executed again and again.  On some architectures
(especially ARM) this results in a large number of calls to gcc.

This patch makes sure to run such tests only once, thus largely
reducing the number of "execve" system calls.

Example: number of "execve" system calls for building the "P2020DS"
(Power Architecture) and "qong" (ARM) boards, measured as:
	-> strace -f -e trace=execve -o /tmp/foo ./MAKEALL <board>
	-> grep execve /tmp/foo | wc -l

	Before: After:	Reduction:
==================================
P2020DS 20555	15205	-26%
qong	31692	14490	-54%

As a result, built times are significantly reduced, typically by
30...50%.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Albert Aribaud <albert.aribaud@free.fr>
cc: Graeme Russ <graeme.russ@gmail.com>
cc: Mike Frysinger <vapier@gentoo.org>
Tested-by: Graeme Russ <graeme.russ@gmail.com>
Tested-by: Matthias Weisser <weisserm@arcor.de>
Tested-by: Sanjeev Premi <premi@ti.com>
Tested-by: Simon Glass <sjg@chromium.org>
Tested-by: Macpaul Lin <macpaul@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-03 20:44:58 +01:00
Gabe Black
4c1c355a68 x86: Fix a compiler warning in arch/x86/lib/realmode.c
Ensure that the value being passed to a %d format specifier is of type
int.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-02 21:45:38 +11:00
Gabe Black
fdb711528c x86: Remove the prototype for the unused function board_init
Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-02 21:08:16 +11:00
Graeme Russ
3c7db1beac x86: Rename include/asm/ic to include/asm/arch-sc520
Also include some trivial related cleanups
2011-11-02 20:49:17 +11:00
Ondrej Kupka
7b3d5380ee x86: turn off cache: set control register properly
Bits should be ORed when they are supposed to be added together

Signed-off-by: Ondrej Kupka <ondra.cap@gmail.com>
2011-11-02 20:48:30 +11:00
Simon Glass
f5ca20c6b6 x86: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-23 23:34:19 +02:00
Anton Staaf
3620f860ef x86: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Graeme Russ <graeme.russ@gmail.com>
2011-10-23 20:50:43 +02:00
Mike Frysinger
e2a53458a7 net: drop !NET_MULTI code
This is long over due.  All but two net drivers have been converted, but
those have now been dropped.

The only thing left to do is actually delete all references to NET_MULTI
and code that is compiled when that is not defined.  So here we scrub the
core code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:16 +02:00
Mike Frysinger
476af299b0 image: push default arch values to arch headers
This pushes the ugly duplicated arch ifdef lists we maintain in various
image related files out to the arch headers themselves.

Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:15 +02:00
Graeme Russ
9558b48af0 console: Implement pre-console buffer
Allow redirection of console output prior to console initialisation to a
temporary buffer.

To enable this functionality, the board (or arch) must define:
 - CONFIG_PRE_CONSOLE_BUFFER - Enable pre-console buffer
 - CONFIG_PRE_CON_BUF_ADDR - Base address of pre-console buffer
 - CONFIG_PRE_CON_BUF_SZ - Size of pre-console buffer (in bytes)

The pre-console buffer will buffer the last CONFIG_PRE_CON_BUF_SZ bytes
Any earlier characters are silently dropped.
2011-10-05 22:03:09 +02:00
Albert ARIBAUD
fa82f871c8 Convert ISO-8859 files to UTF-8
There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-08-04 23:34:02 +02:00
Wolfgang Denk
f6c019c454 Unify timer_init() and cpu_init() prototypes
Clean up some duplicated prototype declarations.
Get rid of now useless AVR32 initcalls.h file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Graeme Russ <graeme.russ@gmail.com>
2011-08-01 15:10:15 +02:00
Mike Williams
1626308797 cleanup: Fix typos and misspellings in various files.
Recieve/Receive
recieve/receive
Interupt/Interrupt
interupt/interrupt
Addres/Address
addres/address

Signed-off-by: Mike Williams <mike@mikebwilliams.com>
2011-07-28 21:27:36 +02:00
Andreas Bießmann
09c2e90c11 unify version_string
This patch removes the architecture specific implementation of
version_string where possible. Some architectures use a special place
and therefore we provide U_BOOT_VERSION_STRING definition and a common
weak symbol version_string.

Signed-off-by: Andreas Biemann <andreas.devel@googlemail.com>
CC: Mike Frysinger <vapier@gentoo.org>
CC: Peter Pan <pppeterpppan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-28 17:22:53 +02:00
Graeme Russ
4769be21cc Timer: Remove reset_timer() for non-Nios2 arches 2011-07-26 14:53:30 +02:00
Graeme Russ
5c8404aff1 Timer: Remove set_timer completely 2011-07-26 14:52:17 +02:00
Wolfgang Denk
cd6881b519 Minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-19 22:22:44 +02:00
Scott Wood
83b7e2a7f2 Handle most LDSCRIPT setting centrally
Currently, some linker scripts are found by common code in config.mk.
Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is
sometimes in arch config.mk and sometimes in board config.mk.  Some
are found using an arch-specific rule for looking in CPUDIR, etc.

Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL
when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact
that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds.

Replace all of this -- except for a handful of boards that are actually
selecting a linker script in a unique way -- with centralized ldscript
finding.

If board code specifies LDSCRIPT, that will be used.
Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used.

If neither of these are specified, then the central config.mk will
check for the existence of the following, in order:

$(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
$(TOPDIR)/$(CPUDIR)/u-boot.lds

Some boards (sc3, cm5200, munices) provided their own u-boot.lds that
were dead code, because they were overridden by a CPUDIR u-boot.lds under
the old powerpc rules.  These boards' own u-boot.lds have bitrotted and
no longer work -- these lds files have been removed.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-30 00:59:47 +02:00
Graeme Russ
b7af583185 sc520: Move reset to stand-alone file
Partial linking allows weak functions to be overridden in files containing
only one function. Moving the sc520 override of reset_cpu gets rid of an
ugly #ifdef

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-13 19:43:29 +10:00
Graeme Russ
fea2572001 x86: Rename i386 to x86
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-13 19:43:28 +10:00