Commit graph

57925 commits

Author SHA1 Message Date
Neil Armstrong
dad258fadd ARM: meson: add unique MAC address generation
Add support for generating an unique MAC address using the SoC internal
serial number from the Secure Monitor interface.

The algorithm generates an unicast locally administered 6bytes minus 2bits
address using an crc16 of the serial for the top 16bits with the lower 2 bits
masked to setup the unicast locally administered property and a crc24 for
the lower 24bits.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 16:04:59 +02:00
Neil Armstrong
0ef8e4069e ARM: meson: sm: Add secure monitor calls to retrieve SoC serial number
The Secure Monitor interface permits retrieving the SoC Serial Number,
add a function to retrieve it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 16:04:59 +02:00
Andreas Färber
aca71d6927 board: amlogic: vim: Fix README
Unlike the BayLibre repos Khadas' repo defaults to using native gcc,
so specify the CROSS_COMPILE setting matching the prescribed toolchain.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 16:04:59 +02:00
Tom Rini
ca4491f2d2 Merge tag 'rockchip-for-v2019.07-rc5-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- fix for atf bl31_image_info pointer
- fix for rockpro64 vdd_log init
- fix for tinker-rk3288 SPL size too big
2019-07-02 08:18:19 -04:00
Kever Yang
665ebcadd6 rockchip: rk3288: enable TPL for tinker-board
All the config for TPL has been update, we can enable the TPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
6f3af24fd9 rockchip: config: tiner-rk3288: extend CONFIG_SYS_MONITOR_LEN to 600KB
The raw u-boot.bin for tinker board has been about 450KB without
debug option, and 550KB with all debug on, and the default value is 200KB,
which is not enough for run raw u-boot.bin.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
d79036c22d rockchip: config: update config for TPL support on tinker-rk3288
We need to update TEXT BASE for TPL/SPL/U-Boot;
SPL no need relocate STACK after enable TPL, so remove it;
Don't enable pinctrl names so that SPL can get pinctrl dts;

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
e3f9a93e5a rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in spl
rockchip pinctrl driver has update to use dts, so we need
to add the pinctrl config in SPL for sdmmc.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
7e7f79207d rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dts
Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts
into rk3288-tinker-u-boot.dtsi.
When both board level and soc level '-u-boot.dtsi' files exist,
we need to include the soc level 'rk3288-u-boot.dtsi' manually.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
590dc42620 rockchip: dts: rk3288: move reloc tag into -u-boot dts
Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi
into rk3288-u-boot.dtsi.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
45290847df rockchip: rk3288: add separate TPL STACK address
TPL is at SRAM while other stage is at SDRAM, so it needs
separate STACK.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-02 11:49:49 +08:00
Kever Yang
d18ca747b6 rockchip: rk3288: enable TPL configs to chip level
More boards other than vyasa needs TPL, so enable the TPL configs
at chip level instead of board level.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Mark Kettenis
5a6d960b22 rockchip: dts: rk3399: rockpro64: Provide init voltage
Add missing regulator-init-microvolt property to vdd_log regulator.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Rebase on latest u-boot-rockchip master)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775
2019-07-02 10:49:17 +08:00
Frieder Schrempf
a239b82dad spl: atf: Fix uninitialized pointer to bl31_image_info
The pointer to struct atf_image_info in
bl31_params_mem.bl31_params.bl31_image_info is not initialized before
being dereferenced. This can cause U-Boot to crash right before jumping
to the BL31 ATF binary.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: bcc1726a7b ("spl: add support to booting with ATF")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 10:30:02 +08:00
Shawn Guo
8c2d42d526 poplar: increase SYS_MALLOC_F_LEN for DM_FLAG_PRE_RELOC support
There is a regression seen on Poplar platform, which doesn't even show
a U-Boot version banner on booting.  It turns out that due to landing
of commit 3a7c45f6a7 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver"), we need to increase SYS_MALLOC_F_LEN from its
default size 0x400, as pre-relocation requires more memory there.  Let's
increase SYS_MALLOC_F_LEN to 0x4000 to fix the regression.

Thanks to Andreas Färber <afaerber@suse.de> for reporting, and Bin Meng
<bmeng.cn@gmail.com> for trouble shooting.

Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2019-07-01 09:35:56 -04:00
Tom Rini
5c74868c9f Second set of u-boot-atmel fixes for 2019.07 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdGaVcAAoJEB6zHgIOrC/Ic1oH/3Hu55HbHVnA2QqRof/o6RnZ
 VNJQ11+Zs7QA7TIMT/Z5j9ohX0pEkVPQziD9zAL1rz7WJ/laYkPh8wqsKWmfFD2j
 2mCCnf8/vGvST8fiSv0BQ6cqozdMwdQjQ08Eqw0srJhCzqj/I8o8MNlts+OAXNIM
 CyT7LdIr/QSO05zDYxFibki4qs7Q5S8WXbtjsmbAAYajcet5w5+hEZRAD2YXuUv8
 TBuBWz6bgcSLbV7E7YXexoffgIha2K3ETAxWraKZLcc96MNLL054uBraa3dmybqZ
 +0+PHIOcNk2JR4BQmUHCoNgEuKTBPlayxZ3hVUzWzUwot4gBRRUFu/pbnRtLcF4=
 =RzN7
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-fixes-2019.07-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel fixes for 2019.07 cycle
2019-07-01 07:31:26 -04:00
Tom Rini
884512f7db UniPhier SoC updates for v2019.07
- Add SPI pin-mux data for pinctrl driver
 
 - Remove unused code
 
 - Trivial bug-fix and clean-up
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl0XafEeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG4wgQAI/+kmGqxWiIEdpg
 QFv1SACIU+h/sWYnAAvyja4bqR8XkQ1mmiSCit/6VGqxIjeR27QnHV9/gEL0Q4Tf
 5e/w0MrPBz411K497UITreJBkvTFPPw928OsU7w5uWm5NpXmGlRkIRSB6sP0HNGe
 3QOLdTnBWy6W1TMfjSmM9TCpHpJTbOpQS76H2rhT+QMXCwG2n8Z3tjd/soCuFKi5
 V9RAAxfkilms5NWWmVlq0LU03Z0BRa2D28TFlmp1zUNnoChG8ty21wNe2Zff1hTM
 FtuY6Wt+yVjzVUqGnCsYbkKoL2FDTS/3ezfG/VY8EVHDy0pWLZIP7JzwDouFBBu8
 KEkNtiLNWfotCcOAFCl6g18xhpKrTRdGnc0M8jpnoH9VHHmIlV75UDkcozEDmOIv
 HfMJxWo1GN9CYAwkhmkDgv6Rl1hElNvekHdeB0ynZuNLdTZhN+fNrQtGe3A4kmLq
 rLa5OLJEszrqHmPcy5IOEImM7xVR8mzYBYrR3jvdb6AFM1GVLE3ilExU59ipRvlR
 QAHDmW/oRFNCVZGxNwt0arG1T54HtVKlDMw+UJejGNYe/I/JplDd+Hq6IaXi0JHp
 drjkyAVgmzi8pbrR52myAudPI60BkTDQPlTnhgqaNGxB0+xlQUue67meJcGsavxK
 33k2b5WhTh+WiHYzgZI87RkQRJnq
 =VpzL
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2019.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2019.07

- Add SPI pin-mux data for pinctrl driver

- Remove unused code

- Trivial bug-fix and clean-up
2019-06-29 12:09:23 -04:00
Tom Rini
4a94115206 Pull request for UEFI sub-system for v2019.07-rc5 (4)
The definition of an unimplemented function is corrected.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl0WzG4ACgkQxIHbvCwF
 GsSKQA/8CvMZylaiSlgHn7E5UWbhOEWUZgromgXWplPasB1zuT31CQ1VXKdbGN/R
 J2njY7STaWSUpp+HDY0SUYPoNvzmDRkZLw8beY1+lIqT5QkOqbUiZrUmLyzqpL1Z
 7f/kpdVwNlvRWyzrqX/60DJ8trD8gVwkk5RQgSSpm4df5wKU994KT2aWXIEXX6Df
 HNTdHIjTfZWBdcLRZ6HwrPUvA8etsjigb8IgEZ0lTn9uDVb4EhRu7tqfMQ4wpBPp
 qXP60PIoRxq0MeQ+B9hNs1gsTwEwHYyx1sZePkacEHmt7jXmkVaCuyiiG8EkI7Ru
 tA2tJQTmEj+/XMsgShveXClSBllAmMfAzZzQq8Q9BonPR2REPq8i1j9G9yH0mL7k
 LvDr126v8L8lEyd8yQs0f3Y700wzni4n0RlGIzsNGPIxQ3CCcY6O+GPM3hC+5giZ
 n9kwmGf8oH1cnTZWVzu9UErfbVtdeVza+hkHjf2Q4jNL0CS2yprGSCE7EjwNHyrY
 HP4CSYUM318LJgLpCBgR4ZRBlZCr9ncmVjRLy/OSpGX5BLfZ6UJY+yTpLaDvWtmE
 /dY4Zr5x9NEjqbF9v0R5YFR8Pdv5cjMjj2YnXuiSGm5tHuovPaes2xyMpzXancKU
 jYkDmKQOxgRcqXOKFQkbwQI6mxYwJnlcwKehQXHr2Ym/TLUMIp8=
 =P/ys
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc5-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc5 (4)

The definition of an unimplemented function is corrected.
2019-06-29 09:58:08 -04:00
Masahiro Yamada
69492fb4c5 ARM: uniphier: move sg_set_{pinsel, iectrl} to more relevant places
Move the sg_set_pinsel macro to arch/arm/mach-uniphier/arm32/debug_ll.S
since it is not used anywhere else.

Move the C functions sg_set_{pinsel,iectrl} to debug-uart.c since they
are not used anywhere else.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:18 +09:00
Masahiro Yamada
e3d5d3ac5b ARM: uniphier: remove unused init code for CONFIG_DEBUG_UART
debug_uart_init() is called from spl_board_init(), which is only
compiled for SPL. For U-boot proper, _debug_uart_init() is unreachable,
so dropped by the dead code elimination.

Now that 64-bit SoCs of this SoC family no longer support SPL,
debug-uart-ld20.c is never compiled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:18 +09:00
Masahiro Yamada
3b7fc3ff31 ARM: uniphier: include <linux/io.h> from dram_init.c
This file calls readl(), so needs to include <linux/io.h>.
Currently, it relies on someone else including it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:17 +09:00
Masahiro Yamada
139a94a986 ARM: uniphier: remove unused sg_set_iectrl_range()
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:16 +09:00
Masahiro Yamada
3f0d299e88 ARM: uniphier: remove unused SC_DPLLOSCCTRL
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:15 +09:00
Masahiro Yamada
caee7619a9 ARM: uniphier: fix build error for CONFIG_DEBUG_LL=y
Commit e27d6c7d32 ("ARM: uniphier: simplify SoC ID get function")
accidentally removed the macros needed to compile debug_ll.S

Revive them.

Fixes: e27d6c7d32 ("ARM: uniphier: simplify SoC ID get function")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:14 +09:00
Kunihiko Hayashi
d5381853ad pinctrl: uniphier: Add SPI pin-mux settings
Add pin-mux settings for SPI controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:21:26 +09:00
Heinrich Schuchardt
efcf0a1f56 efi_loader: correct signature of ConvertPointer()
ConvertPointer() must be EFIAPI. The first parameter should be of type
efi_uint_t. Use the same parameter name as the UEFI specification.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-29 04:24:35 +02:00
Tom Rini
0352e878d2 Fixes for 2019.07
- menlo board
 - allow SDB on Sabre
 - HAB for mx6sl
 - apalis board
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0VwBcPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3k4AL/iaMEhY5e43krMSmlnWDfS2DsTVpyUBX1Q7X
 JHkuKQ8iH3bBSquwLNFju2hGNK8whCHfsIB5QgSh4uK3JIzWAh+/5TCGXbPDkGMJ
 PI/hyxKy2EB245SMshcJMHbyLK6PeHi4V/WA4WyY2c91Dz/DNx7UhMZOlFm8wyMl
 TwDCwtlqHodz0tXKUziCjSqTfxj7WSThwuyQ0SEHAccglM1MzM1JHq1RcdV7Pjdh
 bDpMC0rjcxYl5MM7gIig5OMtx+26HgP6JM+QfeoEuBm0PbhxV6ZFyHlafb8W/ba0
 SjzMWIknZWYA9GTAkdUgN+E0ChZVID0oSVoVh51eKiOG1z+LpkJEKE7xsaCAeBiQ
 BupLRgd0tBtqVK345EFDCy5UkYrnkLOnI+3JQNZ9bxBoPmKAf6wvhqa9Jf3bc+rP
 iSYh9Lm3sWVlXKcLR4ltS39D48OT8GZqun8zLpZkwpAWxRMuFvR+R7Q+VMVKmEF2
 1dn3EJhMsvbmTj0lYRp+ObEEpJDL9A==
 =DFoX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2019.07

- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board
2019-06-28 08:00:22 -04:00
Tom Rini
cb8cc1d8fb STM32 MCU fixes/cleanup:
_ Fix SPL console for STM32F769 Discovery
 _ Fix Memory Protection Unit size for STM32F4 series
 _ Cleanup DT for STM32F746 Discovery
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAl0VyiEXHHBhdHJpY2Uu
 Y2hvdGFyZEBzdC5jb20ACgkQysd4L3sz/6YHxw//e+N2aQrdtioDGqHupwycdDWy
 323WMLCnbX6aGgHXMKCRT2X0I+gwQ1Me4Hc4LvwwbsiNoEfwvqR7mo0zE1uHs9kI
 aq+PPsxSyxvFDuT33WhtJqkXPKylMZpLt7HPeA2yuxuQKfLb1G/IqptPCJTbKNBp
 TywIUqYi/d59qkKVC6ohYFB+EigbNNy5Qm2EIxYgfUIsfHURycCX3czSHUyVU4Hn
 GkaBueTEgc1zCXq+yTEYe/0+ESlBpyZQmvf4midx6+knRw6IFy21QsReqNWMWV9H
 Tw6x5m+GpFru1N3kbldz+cfzRLTDjMDGTxT9Dv3JNvA3pu8Mo61esa7vwZnE3njD
 8BGSjwesSFL0i6KEvWc3Ir6U7F5P0wnI+FZ352ixGbleRiOCH6Gn8dpXY9xdPMFt
 m4XME44iXZZDtV9jqCdTNNBUOrp6ieQGOxvOhJAQDYgl0Cf+f2vYVAq7Q+wG8A99
 RdiZ8oLEn0e99aoKwUEj0VaNVMciSeInNif8TZlL2zduDO7gWtFeGIx3dDgzDYls
 0IyQdbUgwCBuZXc/zShaJKcbmdC2K/G/s6+bYyLk940ncLJPwyrNIGA7CK70vMr/
 MS4THwlVmpWm4SpiKXqyIJTPzKylYVXTxtnOvUc5lelkqKdARtYrBvxwnDXLtc2o
 DHJC1RtqlW7L9oEcci0=
 =5mJg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

STM32 MCU fixes/cleanup:
- Fix SPL console for STM32F769 Discovery
- Fix Memory Protection Unit size for STM32F4 series
- Cleanup DT for STM32F746 Discovery
2019-06-28 07:59:38 -04:00
Patrice Chotard
36cb793b35 mach-stm32: Fix MPU region size dedicated to SDRAM for STM32F4
The MPU region dedicated for SDRAM for STM32F4 SoCs family
was set to 16MB, but STM32F429 Evaluation board have 32MB of SDRAM.

When kernel starts, only first 16MB of SDRAM are configured with XN
(eXecute Never) bit disabled, whereas kernel is using 32MB.
To avoid such situation in the future, extend this MPU region to 512MB
as for STM32F7/H7.

It fixes the following user land exception on STM32F429 Evaluation
board :

[    1.713002] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.722605] devtmpfs: mounted
[    1.733057] Freeing unused kernel memory: 72K
[    1.737622] This architecture does not have kernel memory protection.
[    1.744070] Run /sbin/init as init process
[    1.906850]
[    1.906850] Unhandled exception: IPSR = 00000004 LR = fffffffd
[    1.914282] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6
[    1.921433] Hardware name: STM32 (Device Tree Support)
[    1.926601] PC is at 0x1a00b64
[    1.929642] LR is at   (null)
[    1.932669] pc : [<01a00b64>]    lr : [<00000000>]    psr: 01000000
[    1.938993] sp : 01a5cfb0  ip : 00000000  fp : 00000000
[    1.944269] r10: 01a43b00  r9 : 00000000  r8 : 00000000
[    1.949564] r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : 00000000
[    1.956168] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000000
[    1.962701] xPSR: 01000000
[    1.965506] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6
[    1.972658] Hardware name: STM32 (Device Tree Support)
[    1.978132] [<0000c009>] (unwind_backtrace) from [<0000b24f>] (show_stack+0xb/0xc)
[    1.986024] [<0000b24f>] (show_stack) from [<0000b947>] (__invalid_entry+0x4b/0x4c)

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28 09:45:27 +02:00
Patrice Chotard
1d3d87b41a ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in stm32f746-disco-u-boot.dtsi
As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc"
property, no need to add them again in stm32f746-disco-u-boot.dtsi.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28 09:45:07 +02:00
Patrice Chotard
b8e8fdff29 ARM: dts: stm32: Add u-boot, dm-pre-reloc for usart1_pins_a for stm32f769-disco
This allow to get console output in SPL for stm32f769-disco.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28 09:45:07 +02:00
Igor Opaniuk
0ac662da35 apalis_imx6: increase phy autoneg timeout
Default value (4000ms) of PHY_ANEG_TIMEOUT for Micrel KSZ9031 contoller
isn't sufficient to finish auto-negotiation, which sometimes leads to
timeout errors:

Apalis iMX6 # dhcp
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !

Increase the auto-negotiation time-out to 15000ms.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
2019-06-28 00:08:42 +02:00
Marek Vasut
f0be8ff45f ARM: imx: m53menlo: Convert to DM VIDEO
Enable DM Video support on iMX53 M53Menlo and fix minor details
to restore previous behavior of the system.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-28 00:08:42 +02:00
Marek Vasut
86aa7103b6 ARM: imx: m53menlo: Convert MMC, USB and block to DM
Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo .
Convert board code to match the DM support. This also enables DM
pincontrol to configure the SDHI pins.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:48 +02:00
Marek Vasut
9b352ae1ae ARM: imx: m53menlo: Enable DM GPIO
Enable DM GPIO support on iMX53 M53Menlo and fix up board code where
applicable. Enable MALLOC_F to let the GPIO controllers bind early on.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:37 +02:00
Marek Vasut
26bb95f056 ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux
Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 .
Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi,
the GPIO controllers need to be inited early, otherwise m53_set_clock()
won't be able to detect the correct CPU clock frequency by reading the
GPIO.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:23 +02:00
Marek Vasut
1d255904c3 ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux
Synchronize iMX53 device tree from Linux next-20190607 3f310e51ceb1 ,
this is needed to get NFC, UART, USBOTG DT nodes.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:12 +02:00
Pierre-Jean Texier
6de4743406 pico-imx7d: remove unused 'script' variable
Since the pico-pi uses the distroboot,
this commit remove the 'script' variable (cf boot_scripts).

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-27 14:11:03 +02:00
Breno Matheus Lima
5760069ae8 mx6sl: hab: Fix pu_irom_mmu_enabled address
According to hab.c code we have to notify the ROM code if the MMU is
enabled or not. This is achieved by setting the "pu_irom_mmu_enabled"
to 0x1.

The current address in hab.c code is wrong for i.MX6SL, according to ROM
map file the correct address is 0x00901c60.

As we are writing in the wrong address the ROM code is not flushing the
caches when needed, and the following HAB event is observed in certain
scenarios:

--------- HAB Event 1 -----------------
event data:
        0xdb 0x00 0x14 0x41 0x33 0x18 0xc0 0x00
        0xca 0x00 0x0c 0x00 0x01 0xc5 0x00 0x00
        0x00 0x00 0x07 0xe4

STS = HAB_FAILURE (0x33)
RSN = HAB_INV_SIGNATURE (0x18)
CTX = HAB_CTX_COMMAND (0xC0)
ENG = HAB_ENG_ANY (0x00)

Update MX6SL_PU_IROM_MMU_EN_VAR to address this issue.

Reported-by: Frank Zhang <frank.zhang@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-27 14:10:40 +02:00
Fabio Estevam
36adc9a06f pico-imx7d: README: Adjust the binary name after DM conversion
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Joris Offouga <offougajoris@gmail.com>
2019-06-27 14:09:28 +02:00
Igor Opaniuk
936675c6f4 apalis_imx6: fix set_emmcargs wrapper
Fix set_emmcargs wrapper, which prepares proper bootargs for booting
from eMMC.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
2019-06-27 13:54:08 +02:00
Frieder Schrempf
2c72ead738 usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP
Add support for loading u-boot FIT images over the USB SDP protocol in
the SPL

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
[Various build fixes]
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Lukasz Majewski <lukma@denx.de>
2019-06-27 13:50:28 +02:00
Tom Rini
33ca409684 Merge tag 'rockchip-for-v2019.07-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- new board: rk3328 rock64
- rk3328 SPL support
- rk3399 spl/tpl board init cleanup
- use environment to get ATF binary for rk3399
- build u-boot.itb target by default for rockchip
- rk3399 board init fix after pinctrl patch set merged
2019-06-27 07:34:14 -04:00
Eugen Hristev
ad371d8cd1 board: atmel: fix pda variable not being reset
In case someone detects a PDA and u-boot sets the 'pda' variable,
and the user does a saveenv, the pda is set in env, and if the
screen is removed, u-boot will still have in the env the 'pda'
variable, even if no screen is attached.
In order to fix this, we have to reset the 'pda' variable,
such that it's not just set if the screen is detected, but also unset
if no screen is detected.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-06-27 09:47:49 +03:00
Mark Kettenis
7c7ce3600a rockchip: rk3399: Fix enabling boot-on regulators
The new common rockchip pinctrl driver does not support explicit
requests for a particular pinctrl function.  As a result, the
board_init() function bails out early before enabling the boot-on
regulators.  Fix this by simply removing the request for pwm0, pwm2
and pwm3.  The generic DM code already does the necessary
configuration if necessary.

Reported-by: Levin Du <djw@t-chip.com.cn>
Signed-of-by: Mark Kettenis <kettenis@openbsd.org>
2019-06-26 21:11:29 +08:00
Jagan Teki
4977cf67de rockchip: rk3399: Enable TPL_BOARD_INIT
Enable TPL_BOARD_INIT, this would help us to show
TPL boot prints.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:29 +08:00
Jagan Teki
97d98e6bbf rockchip: rk3399: tpl: Mark printascii into debug
Now, we have spl_board_init which has TPL banner prints.

So mark the 'U-Boot TPL board init' print into debug.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:29 +08:00
Jagan Teki
c997c0fc28 rockchip: rk3399: tpl: Add spl_board_init
Add spl_board_init for TPL, that have TPL banner will help
to print tpl boot prints.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Jagan Teki
adde32d033 rockchip: rk3399: Enable SPL_BOARD_INIT
Enable SPL_BOARD_INIT globally to rk3399, this would
help to print the SPL banner during bootup.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Jagan Teki
16b0dd4cd1 rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2
u-boot,dm-pre-reloc for uart0, uart2 indeed u-boot specific
properties. Move them into rk3399-u-boot.dtsi so the boards
which enabled these node will available during SPL.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00