Commit graph

20 commits

Author SHA1 Message Date
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Peng Fan
cca3ff054a video: ipu: Fix dereferencing NULL pointer problem
The clk_set_rate function dereferences the clk pointer without
checking whether it is NULL. This may cause problem when clk is NULL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-01-03 09:46:52 +01:00
Fabio Estevam
c7430d7d5e ipu_common: Let the MX6 IPU clock be calculated in run-time
MX6Q/QP IPU operates at 264MHz and MX6DL IPU at 198MHz.

When running a SPL target, which supports multiple MX6 variants we cannot
properly setup the IPU clock frequency via CONFIG_IPUV3_CLK option as
such decision is done in build-time currently.

Remove the CONFIG_IPUV3_CLK option and let the IPU clock frequency be
configured in run-time on mx6.

Reported-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
[agust: fixed #endif in cgtqmx6eval.h]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-09-11 12:46:51 +02:00
Anatolij Gustschin
f8ba7f2774 video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before
Boards can skip display interface init using board_video_skip().
If display interface was not initialized (e.g. no ipuv3 framebuffer
registered or IPU clock disabled), booting Linux stops due to the
crash in IPU shutdown function, when accessing IPU registers.
Check IPU clock and skip shutdown if clock is not enabled.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-09-04 23:33:45 +02:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Peng Fan
c510f2e436 video: ipu_common: fix build error
Some toolchains fail to build
"clk->rate = (u64)(clk->parent->rate * 16) / div;"
And the cast usage is wrong.

Use the following code to fix the issue,
"
  do_div(parent_rate, div);
  clk->rate = parent_rate;
"

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2016-04-28 16:28:45 +02:00
Peng Fan
3cb4f25cc7 video: ipu: avoid overflow issue
Multiplication, as "clk->parent->rate * 16" may overflow. So use
do_div to avoid such issue.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Signed-off-by: Sandor Yu <sandor.yu@nxp.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2016-03-14 22:47:41 +01:00
Heiko Schocher
cb9f8e6a73 video, ipu: make ldb clock frequency overwritable through board code
the ldb clock can be setup in board code (for example set through PLL5).
Update the ldb_clock rate also through board code.

This should be removed, if a clock framework is availiable.

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
2015-04-20 09:36:59 +02:00
Heiko Schocher
0ced25beb5 video, ipu: make ldb_clock configurable
make the ldb_clock configurable through the new define
CONFIG_SYS_LDB_CLOCK. This is needed as the ldb clock is not
always 650000000, for example on the aristainetos2 board,
where the ldb clock derives from PLL5 clock.

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
2015-04-20 09:34:45 +02:00
Jeroen Hofstee
c5fe2532ac video: ipu: prevent warnings with W=1
- make local functions static
- remove unused is_interlaced function

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:27:37 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Liu Ying
945d069fb5 ipu common: reset ipuv3 correctly
This patch checks self-clear sw_ipu_rst bit in
SCR register of SRC controller to be cleared
after setting it to high to reset IPUv3. This
makes sure that IPUv3 finishes sofware reset.
A timeout mechanism is added to stop polling
on the bit status in case the bit could not be
cleared by the hardware automatically within
10 millisecond.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
2012-11-06 22:24:11 +01:00
Benoît Thébaudeau
1f5e4ee0b9 mx5: Use explicit clock gate names
Use clock gate definitions having names showing clearly the gated clock instead
of names giving only a register field index.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:10 -07:00
Eric Nelson
0bb7e316f0 i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fields
Add meaningful constants for each clock channels and use them for
enabling and disabling i.MX6 clocks.

Includes an update to enable/disable the IPU1 clock in
drivers/video/ipu_common to remove IMX5x register access
when used on i.MX6 as discussed in V1:

     http://patchwork.ozlabs.org/patch/185129/

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2012-10-15 11:54:08 -07:00
Eric Nelson
cf65d478ab ipu_common: Add ldb_clk for use in parenting the pixel clock
Add ldb_clk for use in parenting the pixel clock.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-10 11:35:39 +02:00
Fabio Estevam
9fbdb1aac5 ipu_common: Do not hardcode the ipu_clk frequency
Do not hardcode the ipu_clk frequency and let the board file pass this value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-10 11:35:39 +02:00
Fabio Estevam
477bca22f6 ipu_common: Rename MXC_CCM_BASE
Rename MXC_CCM_BASE to CCM_BASE_ADDR as this is already defined for MX6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-10 11:35:39 +02:00
Fabio Estevam
e4942ad703 ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53
The registers accessed inside clk_ipu_enable/disable are not present on MX6,
so make sure they only run on MX51 and MX53.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-10 11:35:39 +02:00
Fabio Estevam
913db79427 ipu_common: Only apply the erratum to MX51
The following erratum :

"ENGcm08316
IPU: Clarification regarding the bypass mode registers setup for
display and camera interfaces"

only applies to mx51, so restrict its usage for this SoC only.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-10 11:35:38 +02:00
Stefano Babic
575001e40c MX51: Add IPU driver for video support
The patch is a porting of the IPU Linux driver
developed by Freescale to have framebuffer
functionalities in u-boot. The port is based on
kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f,
as delivered by Freescale [i.MX BSP].
Most features are dropped from the original driver and
only LCD support is the goal of this porting.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-22 00:05:05 +02:00