Commit graph

80352 commits

Author SHA1 Message Date
Alper Nebi Yasak
d8830cf840 spl: binman: Split binman symbols support from enabling binman
Enabling CONFIG_BINMAN makes binman run after a build to package any
images specified in the device-tree. It also enables a mechanism for
SPL/TPL to declare and use special linker symbols that refer to other
entries in the same binman image. A similar feature that gets this info
from the device-tree exists for U-Boot proper, but it is gated behind a
CONFIG_BINMAN_FDT unlike the symbols.

Confusingly, CONFIG_SPL/TPL_BINMAN_SYMBOLS also exist. These configs
don't actually enable/disable the symbols mechanism as one would expect,
but declare some symbols for U-Boot using this mechanism.

Reuse the BINMAN_SYMBOLS configs to make them toggle the symbols
mechanism, and declare symbols for the U-Boot phases in a dependent
BINMAN_UBOOT_SYMBOLS config. Extend it to cover symbols of all phases.
Update the config prompt and help message to make it clearer about this.
Fix binman test binaries to work with CONFIG_IS_ENABLED(BINMAN_SYMBOLS).

Co-developed-by: Peng Fan <peng.fan@nxp.com>
[Alper: New config for phase symbols, update Kconfigs, commit message]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:52 +01:00
Alper Nebi Yasak
5204823c81 spl: binman: Declare extern symbols for VPL as well
The binman extern symbol declarations in spl.h are missing the VPL
symbols recently added to spl.c, add them like the others.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:52 +01:00
Alper Nebi Yasak
e09a8b9f1b spl: binman: Make TPL_BINMAN_SYMBOLS depend on TPL_FRAMEWORK
TPL_BINMAN_SYMBOLS depends on SPL_FRAMEWORK. The code this enables is
compiled by checking CONFIG_$(SPL_TPL_)FRAMEWORK, so it should depend on
TPL_FRAMEWORK instead (which in turn depends on SPL_FRAMEWORK). This was
most likely a typo due to copy-pasting the config's SPL version, fix it.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:52 +01:00
Alper Nebi Yasak
d7f0717252 spl: binman: Fix use of undeclared u_boot_any symbols
Some SPL functions directly use the binman 'u_boot_any' symbols to get
U-Boot's binman image position. These symbols are declared by the
SPL/TPL_BINMAN_SYMBOLS configs, but they are accessed by macros defined
by just CONFIG_BINMAN. So when BINMAN is enabled and BINMAN_SYMBOLS is
disabled, the code tries to use undeclared symbols and we get an error.

Therefore, any use of 'u_boot_any' symbols in the code is an implicit
dependency on SPL/TPL_BINMAN_SYMBOLS. However, in the current uses
they are meant to be the next phase's values, where that happens to be
U-Boot. In the meantime, helper funcions spl_get_image_pos/size() were
introduced to get these values.

Convert all uses of u_boot_any symbols to these functions, so we only
access these symbols at one place. Make sure they will not use these
symbols when the BINMAN_SYMBOLS configs are disabled, by returning early
in those cases.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:52 +01:00
Heinrich Schuchardt
d4462ba044 sandbox: cast to pointer from integer of different size
Building sandbox_defconfig on ARMv7 with HOST_32BIT=y results in:

drivers/misc/qfw_sandbox.c:51:25: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
   51 |         void *address = (void *)be64_to_cpu(dma->address);

Add the missing type conversion.

Fixes: 69512551aa ("test: qemu: add qfw sandbox driver, dm tests, qemu tests")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-06-28 03:09:52 +01:00
Simon Glass
4f6500aa1a dm: spl: Allow SPL to show memory usage
Add an option to tell SPL to show memory usage for driver model just
before it boots into the next phase.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
2cb4ddb91e dm: core: Add a command to show driver model statistics
This command shows the memory used by driver model along with various
hints as to what it might be if some 'core' tags were moved to use the
tag list instead of a core (i.e. always-there) pointer.

This may help with future work to reduce memory usage.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
0dfda34ca5 dm: core: Add a way to collect memory usage
Add a function for collecting the amount of memory used by driver model,
including devices, uclasses and attached data and tags.

This information can provide insights into how to reduce the memory
required by driver model. Future work may look at execution speed also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
930a3ddade dm: core: Support accessing core tags
At present tag numbers are only allocated for non-core data, meaning that
the 'core' data, like priv and plat, are accessed through dedicated
functions.

For debugging and consistency it is convenient to use tags for this 'core'
data too. Add support for this, with new tag numbers and functions to
access the pointer and size for each.

Update one of the test drivers so that the uclass-private data can be
tested here.

There is some code duplication with functions like device_alloc_priv() but
this is not addressed for now. At some point, some rationalisation may
help to reduce code size, but more thought it needed on that.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
53c20bebb2 dm: core: Switch the testbus driver to use a new struct
At present this driver uses 'priv' struct to hold 'plat' data, which is
confusing. The contents of the strct don't matter, since only dtoc is
using it. Create a new struct with the correct name.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
d32f62f49d dm: core: Add documentation for the dm command
Add a description and examples for the dm subcommands.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
c625666ea1 dm: core: Fix addresses in the dm static command
This command converts pointers to addresses, but the pointers being
converted are in the image's rodata region. For sandbox this means it
is not in DRAM so it does not make sense to do this conversion.

Fix this by showing a simple pointer instead. Drop the unnecessary
@ and hex prefixes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
dee2f5ae5c dm: core: Sort dm subcommands
Put these in alphabetic order, both in the help and in the implementation,
as there are quite a few subcommands now. Tweak the help for 'dm tree' to
better explain what it does.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
1452870404 dm: core: Rename dm_dump_all()
This is not a good name anymore as it does not dump everything. Rename it
to dm_dump_tree() to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Heinrich Schuchardt
06d590844f test: fix some pylint errors in test_bind.py
* Use spaces not tabs
* Limit lines to 100 spaces
* Remove an unused import
* Sort imports correctly
* Add a module description

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-06-28 03:09:51 +01:00
Heinrich Schuchardt
2be964d29f sandbox: raise SANDBOX_RAM_SIZE_MB default to 256
The UEFI Self Certification Test (SCT) cannot run on 128 MiB.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-06-28 03:09:51 +01:00
Sean Anderson
4780f7d8a6 patman: Fix defaults not propagating to subparsers
On python 3.8.10 (and 3.10), subparsers are not updated with defaults. I
suspect this is related to [1]. Fix this by explicitly updating
subparsers with settings.

[1] https://github.com/python/cpython/issues/89398

Fixes: 3145b63513 ("patman: Update defaults in subparsers")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:51 +01:00
Heinrich Schuchardt
d3eb1bf7cf dm: fix formatting of uclass dump
Insert an empty line after each uclass independent of whether it has
devices or not.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-06-28 03:09:51 +01:00
Heinrich Schuchardt
66995164dd sandbox: show error if the device-tree cannot be loaded
U-Boot's printf() used before setting up U-Boot's serial driver does not
create any output. Use os_printf() for error messages related to loading
the device-tree.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-06-28 03:09:51 +01:00
Heinrich Schuchardt
7750ee45a6 sandbox: add function os_printf()
Before setting up the devices U-Boot's printf() function cannot be used
for console output. Provide function os_printf() to print to stderr.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-06-28 03:09:51 +01:00
Alper Nebi Yasak
ebcaafcded patman: test_util: Print test stdout/stderr within test summaries
While running tests for a python tool, the tests' outputs get printed in
whatever order they happen to run, without any indication as to which
output belongs to which test. Unittest supports capturing these outputs
and printing them as part of the test summaries, but when a failure or
error occurs it switches back to printing as the tests run. Testtools
and subunit tests can do the same as their parts inherit from unittest,
but they don't outright expose this functionality.

On the unittest side, enable output buffering for the custom test result
class. Try to avoid ugly outputs by not printing stdout/stderr before
the test summary for low verbosity levels and for successful tests.

On the subunit side, implement a custom TestProtocolClient that enables
the same underlying functionality and injects the captured streams as
additional test details. This causes them to be merged into their test's
error traceback message, which is later rebuilt into an exception and
passed to our unittest report class.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:51 +01:00
Alper Nebi Yasak
dd6b92b0b9 patman: test_util: Customize unittest test results for more info
By default, unittest test summaries only print extended info about tests
that failed or couldn't run due to an error. Use a custom text result
class to print info about more cases: skipped tests, expected failures
and unexpected successes.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:51 +01:00
Alper Nebi Yasak
d8318feba1 patman: test_util: Use unittest text runner to print test results
The python tools' test utilities handle printing test results, but the
output is quite bare compared to an ordinary unittest run. Delegate
printing the results to a unittest text runner, which gives us niceties
like clear separation between each test's result and how long it took to
run the test suite.

Unfortunately it does not print info for skipped tests by default, but
this can be handled later by a custom test result subclass. It also does
not print the tool name; manually print a heading that includes the
toolname so that the outputs of each tool's tests are distinguishable in
the CI output.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:51 +01:00
Alper Nebi Yasak
ce12c47b92 patman: test_util: Handle nonexistent tests while loading tests
It's possible to request a specific test to run when trying to run a
python tool's tests. If we request a nonexistent test, the unittest
loaders generate a fake test that reports this as an error. However, we
get these fake tests even when the test exists, because test_util can
load tests from multiple places one by one and the test we want only
exists in one.

The test_util helpers currently remove these fake tests when printing
test results, but that's more of a workaround than a proper solution.
Instead, don't even try to load the missing tests.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:51 +01:00
Alper Nebi Yasak
6474aaa1d1 patman: test_util: Fix printing results for failed tests
When printing a python tool's test results, the entire list of failed
tests and their tracebacks are reprinted for every failed test. This
makes the test output quite unreadable. Fix the loop to print failures
and tracebacks one at a time.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:51 +01:00
Sean Anderson
501a9a7ed8 dm: core: Use device_foreach_child where possible
We have some nice macros for iterating over devices in device.h, but they
are not used by the driver core. Convert all the users I could find.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2022-06-28 03:09:51 +01:00
Sean Anderson
8b52f237f0 dm: core: Provide fallbacks for ofnode_conf_read_...
Because fdt_get_config_str et al. were moved/renamed to
ofnode_conf_read_str, they now depend on CONFIG_DM as well as
CONFIG_OF_CONTROL. Add some fallback implementations, preventing a
linker error when CONFIG_SPL_OF_CONTROL and CONFIG_SPL_ENV_IS_IN_MMC are
enabled and CONFIG_SPL_DM is disabled.

Fixes: 7de8bd03c3 ("treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-06-28 03:09:51 +01:00
Sean Anderson
24057fe0a8 sandbox: usb: Fix out-of-bounds read when fd=-1
sandbox_flash_bulk uses priv->read_len to determine if priv->buff contains
the response data (such as from SCSI_INQUIRY). However, if priv->fd=-1 in
handle_read, then priv->read_len is not set even though we are going to
PHASE_DATA. This causes sandbox_flash_bulk to try and read len bytes from
priv->buff, which likely goes past the end of the buffer. Fix this by always
setting priv->read_len even if we aren't going to read anything.

Fixes: f4f715360c ("dm: usb: sandbox: Add an emulator for USB flash devices")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:51 +01:00
Simon Glass
42ae363ddd dtoc: Update fdt tests to use test_util
Use the common functions to run tests and report results. Ensure that the
result code indicates success or failure.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:51 +01:00
Simon Glass
68ff6d3655 bloblist: Describe the design goals
Add a comment explaining the design goals of bloblist, to make it easier
for people to understand and comment on the structure.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:51 +01:00
Tom Rini
ea82ed8c2e Merge branch '2022-06-27-add-armv8-sha1-sha256-support' into next
To quote the author:

This series adds support for the SHA-1 and SHA-256 Secure Hash Algorithm
for CPUs that have support of the ARM v8 Crypto Extensions. It Improves
speed of integrity & signature checking procedures.
2022-06-27 13:39:19 -04:00
Tom Rini
ba0d0e8c74 qemu_arm64: Enable CONFIG_ARMV8_CRYPTO support
Now that we can make use of CPU features for sha1/sha256, enable in QEMU
so that we get some test coverage.

Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-27 13:36:28 -04:00
Loic Poulain
0fcc1c76d1 armv8 SHA-256 using ARMv8 Crypto Extensions
This patch adds support for the SHA-256 Secure Hash Algorithm for CPUs
that have support for the SHA-256 part of the ARM v8 Crypto Extensions.

It greatly improves sha-256 based operations, about 17x faster on iMX8M
evk board. ~12ms vs ~208ms for a 20MiB kernel sha-256 verification.

asm implementation is a simplified version of the Linux version (from
Ard Biesheuvel).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2022-06-27 13:36:28 -04:00
Loic Poulain
915047048f lib: sha256: Add support for hardware specific sha256_process
Mark sha256_process as weak to allow hardware specific implementation.
Add parameter for supporting multiple blocks processing.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2022-06-27 13:36:28 -04:00
Loic Poulain
084d8e6bf9 armv8 SHA-1 using ARMv8 Crypto Extensions:
This patch adds support for the SHA-1 Secure Hash Algorithm for CPUs
that have support for the SHA-1 part of the ARM v8 Crypto Extensions.

It greatly improves sha-1 based operations, about 10x faster on iMX8M
evk board. ~12ms vs ~165ms for a 20MiB kernel sha-1 verification.

asm implementation is a simplified version of the Linux version (from
Ard Biesheuvel).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2022-06-27 13:36:28 -04:00
Loic Poulain
4e883522ba sha1: Fix digest state size/type
sha1 digest size is 5*32-bit => 160-bit. Using 64-bit unsigned long
does not cause issue with the current sha1 implementation, but could
be problematic for vectorized access.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2022-06-27 13:36:28 -04:00
Loic Poulain
8201b8066a lib: sha1: Add support for hardware specific sha1_process
Mark sha1_process as weak to allow hardware specific implementation.
Add parameter to support for multiple blocks processing.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2022-06-27 13:36:27 -04:00
Tom Rini
c316ee674f Xilinx changes for v2022.10
cpu:
 - Add driver for microblaze cpu
 
 net:
 - Add support for DM_ETH_PHY to AXI emac and emaclite
 
 xilinx:
 - Switch platforms to DM_ETH_PHY
 - DT chagnes in ZynqMP and Zynq
 - Enable support for SquashFS
 
 zynqmp:
 - Add support for KR260 boards
 - Move BSS from address 0
 - Move platform identification from board code to soc driver
 - Improve zynqmp_psu_init_minimize
 
 versal:
 - Enable loading app at EL1
 
 serial:
 - Setup default address and clock rates for DEBUG uarts
 
 pinctrl:
 - Add support for tri state and output enable properties
 
 relocate-rela:
 - Clean relocate-rela implementation for ARM64
 - Add support for Microblaze
 
 microblaze:
 - Add support for runtime relocation
 - Rework cache handling (wiring, Kconfig) based on cpuinfo
 - Remove interrupt support
 
 timer:
 - Extract axi timer driver from Microblaze to generic location
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYrlYngAKCRDKSWXLKUoM
 ITgbAJ9S9xO2QqxtuodWAYMtJfvZ14c7mgCeKnyFTrrBnJkC0wPsGqE71oNJ49o=
 =3gGm
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2022.10

cpu:
- Add driver for microblaze cpu

net:
- Add support for DM_ETH_PHY to AXI emac and emaclite

xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS

zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize

versal:
- Enable loading app at EL1

serial:
- Setup default address and clock rates for DEBUG uarts

pinctrl:
- Add support for tri state and output enable properties

relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze

microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support

timer:
- Extract axi timer driver from Microblaze to generic location
2022-06-27 10:15:50 -04:00
Michal Simek
728a86edb6 timer: Add SPL_REGMAP dependency for Xilinx timer
Add SPL_REGMAP dependency when SPL is enabled. This can avoid compilation
issues if timer is selected but SPL_REGMAP not.

Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/8f6c187e04cb3127bf5148ae2dbbdf55b25ea544.1655982509.git.michal.simek@amd.com
2022-06-27 09:03:54 +02:00
Michal Simek
b5b8bad2db xilinx: Enable support for SquashFS
Enable SquashFS for all xilinx platforms.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/dbe85afda8cd90ebfc537979d382808ff9bec160.1655982259.git.michal.simek@amd.com
2022-06-27 09:03:07 +02:00
Stefan Herbrechtsmeier
036ef47b32 arm64: zynqmp: Move helper functions below header includes
Move helper functions in psu_init files below header includes to avoid
forward declarations.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-15-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
d2162549fe tools: zynqmp_psu_init_minimize: Move helper functions below header includes
Move helper functions below header includes to avoid forward
declarations.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-14-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
4d8f2bb151 tools: zynqmp_psu_init_minimize: Use CR instead of LF
Use carriage return instead of line feed to support mangling across
lines.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-13-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
2f799b4fbc tools: zynqmp_psu_init_minimize: Remove low level uart settings
There is no reason to do serial initialization. Uart driver does it
already based on DT. Good effect is that it is clear which interface is
console.
The resulting change was done in past by commit 84d2bbf082 ("arm64:
zynqmp: Remove low level UART setting").

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-12-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
f93c1c8f3f xilinx: zynqmp: make spi flash support optional
The set_dfu_alt_info function use the CONFIG_SYS_SPI_U_BOOT_OFFS define
to set the dfu_alt_info environment variable for qspi boot mode. Guard
the usage of CONFIG_SYS_SPI_U_BOOT_OFFS to make spi flash support
optional.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-11-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
86ceedd84e xilinx: common: Separate display cpu info function
Move the print_cpuinfo function of CONFIG_DISPLAY_CPUINFO into its own
source file to support reuse by other board vendors.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-10-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
381ede9e38 xilinx: cpuinfo: Print soc machine
Print the soc machine in the print_cpuinfo function.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-9-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
a1e618a1b9 soc: xilinx: zynqmp: Add machine identification support
Add machine identification support based on the
zynqmp_get_silicon_idcode_name function and use the soc_get_machine
function of the soc uclass to get silicon idcode name for the fpga init.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-8-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
18fcb49db5 soc: xilinx: zynqmp: Remove redundant checks for zynqmp_mmio_read
Remove the redundant SPL and CurrentEL checks for the zynqmp_mmio_read
function call because the function itself runs the same checks.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-7-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
d43d78ef03 xilinx: zynqmp: Merge device lists
Merge the svd / xck devices into to the common zynqmp device list.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-6-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00