Commit graph

26 commits

Author SHA1 Message Date
Simon Glass
a821c4af79 dm: Rename dev_addr..() functions
These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

   1. dev_read_addr...()    - works on devices, supports flat/live tree
   2. devfdt_get_addr...()  - current functions, flat tree only
   3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:01 -06:00
Adrian Alonso
26dd346464 imx: mxc_gpio: add support for imx7d SoC
* Add mxc_gpio support for imx7d SoC
* Use CONFIG_MX7 to extend mxc gpio driver support for imx7d

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2015-09-02 15:31:33 +02:00
Masahiro Yamada
0f9258228e of: clean up OF_CONTROL ifdef conditionals
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL.  We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in include/fdtdec.h:

 #ifdef CONFIG_OF_CONTROL
 # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL)
 #  define OF_CONTROL 0
 # else
 #  define OF_CONTROL 1
 # endif
 #else
 # define OF_CONTROL 0
 #endif

Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute.  It refers to
CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for
SPL.

Also, we no longer have to cancel CONFIG_OF_CONTROL in
include/config_uncmd_spl.h and scripts/Makefile.spl.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-18 13:46:05 -04:00
Peng Fan
f2753b0681 mxc: gpio add i.MX6UL support
i.MX6UL does not have GPIO6/7, so do not include them for i.MX6UL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:08 +02:00
Simon Glass
e564f054af dm: core: Add dev_get_uclass_priv() to access uclass private data
Add a convenience function to access the private data that a uclass stores
for each of its devices. Convert over most existing uses for consistency
and to provide an example for others.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Peng Fan
99c0ae16d8 dm:gpio:mxc add DT support
This patch add DT support for mxc gpio driver.

There are one place using CONFIG_OF_CONTROL macro.
1. The U_BOOT_DEVICES and mxc_plat array are complied out. To DT,
   platdata is alloced using calloc, so there is no need to use mxc_plat.

The following situations are tested, and all work fine:
1. with DM, without DT
2. with DM and DT
3. without DM
Since device tree has not been upstreamed, if want to test this patch.
The followings need to be done.
 + pieces of code does not gpio_request when using gpio_direction_xxx and
   etc, need to request gpio.
 + move the gpio settings from board_early_init_f to board_init
 + define CONFIG_DM ,CONFIG_DM_GPIO and CONFIG_OF_CONTROL
 + Add device tree file and do related configuration in
   `make ARCH=arm menuconfig`
These will be done in future patches by step.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:29 -07:00
Peng Fan
637a769318 dm:gpio:mxc add a bank_index entry in platdata
Add a new entry in platdata structure and intialize
bank_index in mxc_plat array.
This new entry can avoid using `plat - mxc_plat` by using
`plat->bank_index`.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Simon Glass <sjg@chromium.org>
2015-02-12 15:17:29 -07:00
Simon Glass
c65dd445c9 dm: gpio: imx: Drop request()/free() in the driver
Now that the uclass supports gpio_request/free() there is no need for the
driver to implement it too. Drop this unnecessary code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:30:51 -06:00
Simon Glass
441d0cfff1 dm: imx: gpio: Support driver model in MXC gpio driver
Add driver model support with this driver. In this case the platform data
is in the driver. It would be better to put this into an SOC-specific file,
but this is best attempted when more boards are moved over to use driver
model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2014-10-22 10:36:56 -06:00
Stefano Babic
326ea986ac Merge git://git.denx.de/u-boot-arm
Conflicts:
	board/freescale/mx6qsabrelite/Makefile
	board/freescale/mx6qsabrelite/mx6qsabrelite.c
	include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-07-31 11:30:38 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Dirk Behme
04c79cbd5f mxc_gpio: Correct the GPIO handling in gpio_direction_output()
Setting the direction and an output value should be done by

First, set the desired output value.

Then, switch to output.

If this is done in the inverse order, like at the moment,
there can be a glitch on the GPIO line while switching first
the old output value and aftwards the new one.

Fix this by inverting the order of the direction/set_value
calls.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-07-24 13:01:18 +02:00
Troy Kisky
5ea6d7c8fc mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
Use CONFIG_MX6 when the particular processor
variant isn't important.

Reserve the use of CONFIG_MX6Q to
specifically test for quad cores variant.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-11-10 08:15:40 +01:00
trem
e71c39def6 gpio: add gpio api support to mx27 (v4)
The gpio api has been tested on an armadeus apf27.

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:29 +02:00
Benoît Thébaudeau
5dafa4543c mxc: Make gpio_get_value() use PSR
gpio_get_value() should use PSR like Linux, not DR, because DR does not always
reflect the pin state, while PSR does. This is especially useful to detect a
short circuit on a GPIO pin configured as output, or to read the level of a pin
controlled by a non-GPIO IOMUX function.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:28 +02:00
Timo Ketola
eba1868be4 i.MX25: This architecture has a GPIO4 too
Signed-off-by: Timo Ketola <timo@exertus.fi>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:33 +02:00
Vikram Narayanan
d71c9c9fc0 imx: Return gpio_set_value in gpio_direction_output
Return gpio_set_value in gpio_direction_output.
Earlier it returned 0 and ignored gpio_set_value's return value.

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-04-16 14:53:59 +02:00
Vikram Narayanan
be28255462 imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
Use the defined GPIO_TO_PORT macro. Remove gpio >> 5 references.

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-04-16 14:53:59 +02:00
Vikram Narayanan
8d28c211f3 imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
Add GPIO_TO_PORT macro in the mxc_gpio.c driver

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-04-16 14:53:59 +02:00
Joe Hershberger
365d607033 gpio: Replace ARM gpio.h with the common API in include/asm-generic
ARM boards should use the generic GPIO API
This means changing gpio to unsigned type
Remove the unused gpio_toggle() function which is not part of the API
Comment that free should not modify pin state

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>

fixed merge conflict in da8xx_gpio.c, tegra2_gpio.c, and
extended to the new mxs_gpio.c.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-01-09 20:10:32 -06:00
Jason Liu
c8bfe24fec i.mx: mxc_gpio: add the i.mx6q support
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2011-12-09 17:30:10 +01:00
Stefano Babic
d8e0ca851b IMX: uniform GPIO interface using GPIO framework
IMX processors has a slightly different interface
to access GPIOs and do not make use of the provided GPIO
framework. The patch substitutes mxc_ specific
functions and make use of the API in asm/gpio.h

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Fabio Estevam
e53bcd947d gpio: imx: Fix return value on error
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-11 23:03:15 +02:00
Stefano Babic
8627111543 IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
As exception among the i.MX processors, the i.MX31 has headers
without general names (mx31-regs.h, mx31.h instead of imx-regs.h and
clock.h). This requires several nasty #ifdef in the drivers to
include the correct header. The patch cleans up the driver and
renames the header files as for the other i.MX processors.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-27 19:38:05 +02:00
Liu Hui-R64343
01643ec180 mxc_gpio: add support for MX53 processor
This patch add mxc_gpio support for Freescale MX53 processor

Signed-off-by: Jason Liu <r64343@freescale.com>
2011-02-02 00:54:42 +01:00
Stefano Babic
c4ea142424 Use common function to set GPIOs for MX3 and MX5
The patch adds support for setting gpios to the
MX51 processor and change name to the corresponding
functions for MX31. In this way, it is possible to get rid
of nasty #ifdef switches related to the processor type.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-09-29 11:24:30 +02:00
Renamed from drivers/gpio/mx31_gpio.c (Browse further)