Commit graph

2356 commits

Author SHA1 Message Date
Po-Yu Chuang
d6150db2dc power: ftpmu010: move drivers/power/ftpmu010.h to include/faraday
Also add API declarations.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2011-04-27 19:38:07 +02:00
Stefano Babic
8627111543 IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
As exception among the i.MX processors, the i.MX31 has headers
without general names (mx31-regs.h, mx31.h instead of imx-regs.h and
clock.h). This requires several nasty #ifdef in the drivers to
include the correct header. The patch cleans up the driver and
renames the header files as for the other i.MX processors.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-27 19:38:05 +02:00
Heiko Schocher
71d19f30d6 rtc, rv3029: add trickle charger support.
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-26 00:24:40 +02:00
Aaron Williams
a90b9575f3 cfi_flash driver - Add delay after reset command
I ran into a problem where the reset was failing except when I enabled
debugging support.  After talking with Garret Swalling at Spansion I
was told that the GL-N series of devices require a 500ns wait for the
reset to complete.  The below patch adds a 1us delay after all reset
commands.

-Aaron Williams

Signed-off-by: Aaron Williams <aaron.williams@caviumnetworks.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-04-21 15:51:49 +02:00
Heiko Schocher
5b448adb4b mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devices
tested on the a4m072 board with a S29GL512P flash.

flinfo without this patch
Bank # 1: CFI conformant flash (16 x 16)  Size: 32 MB in 256 Sectors
  AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E
  Erase timeout: 16384 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 32 bytes
[...]

flinfo with this patch
Bank # 1: CFI conformant flash (16 x 16)  Size: 32 MB in 256 Sectors
  AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E2301
  Erase timeout: 16384 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 32 bytes
[...]

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-04-21 15:51:39 +02:00
Mike Frysinger
6a011ce851 cfi_flash: reverse geometry for M29W800DT parts
The M29W800DT parts also report their geometry with the sector layout
reversed.  So add that ID to the flash_fixup_stm function.

Otherwise, we get:
bfin> flinfo

Bank # 1: CFI conformant FLASH (16 x 16)  Size: 1 MB in 19 Sectors
  AMD Standard command set, Manufacturer ID: 0x20, Device ID: 0x22D7
  Erase timeout: 8192 ms, write timeout: 1 ms

  Sector Start Addresses:
  20000000        20004000        20006000        20008000        20010000
  20020000        20030000        20040000        20050000        20060000
  20070000        20080000        20090000        200A0000        200B0000
  200C0000        200D0000        200E0000        200F0000

Reported-by: Jianxi Fu <fujianxi@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-04-21 15:51:17 +02:00
Wolfgang Denk
aef293bc85 Merge branch 'phylib' of git://git.denx.de/u-boot-mmc 2011-04-20 23:01:52 +02:00
Wolfgang Denk
afe0414b2e Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2011-04-20 22:50:22 +02:00
Wolfgang Denk
a94028338c Merge branch 'master' of git://git.denx.de/u-boot-i2c 2011-04-20 22:48:47 +02:00
Wolfgang Denk
4f27f0ab98 Merge branch 'master' of git://git.denx.de/u-boot-mmc 2011-04-20 22:18:13 +02:00
Andy Fleming
865ff85640 fsl: Change fsl_phy_enet_if to phy_interface_t
The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum.
This meant that drivers which used fsl_phy_enet_if to deal with
PHY interfaces would have to convert between the two (or we would have
to have them mirror each other, and deal with the ensuing maintenance
headache). Instead, we switch all clients of fsl_phy_enet_if over to
phy_interface_t, which should become the standard, anyway.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:35 -05:00
Andy Fleming
063c12633d tsec: Convert tsec to use PHY Lib
This converts tsec to use the new PHY Lib.  All of the old PHY support
is ripped out.  The old MDIO driver is split off, and placed in
fsl_mdio.c.  The initialization is modified to initialize the MDIO
driver as well.  The powerpc config file is modified to configure PHYLIB
if TSEC_ENET is configured.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:34 -05:00
Andy Fleming
9082eeac5d phylib: Add a bunch of PHY drivers from tsec
The tsec driver had a bunch of PHY drivers already written. This
converts them all into PHY Lib drivers, and serves as the first
set of PHY drivers for PHY Lib.

While doing that, cleaned up a number of magic numbers (though
not all of them, as PHY vendors like to keep their numbers as
magical as possible).  Also, noticed that almost all of the
vitesse/cicada PHYs had the same config/parse/startup functions,
so those have been collapsed into one.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:34 -05:00
Andy Fleming
5f184715ec Create PHY Lib for U-Boot
Extends the mii_dev structure to participate in a full-blown MDIO and
PHY driver scheme.  The mii_dev structure and miiphy calls are modified
in such a way to allow the original mii command and miiphy
infrastructure to work as before, but also to support a new set of APIs
which allow (among other things) sharing of PHY driver code and 10G support

The mii command will continue to support normal PHY management functions
(Clause 22 of 802.3), but will not be changed to support 10G
(Clause 45).

The basic design is similar to PHY Lib from Linux, but simplified for
U-Boot's network and driver infrastructure.

We now have MDIO drivers and PHY drivers

An MDIO driver provides:
read
write
reset

A PHY driver provides:
(optionally): probe
config - initial setup, starting of auto-negotiation
startup - waiting for AN, and reading link state
shutdown - any cleanup needed

The ethernet drivers interact with the PHY Lib using these functions:
phy_connect()
phy_config()
phy_startup()
phy_shutdown()

Each PHY driver can be configured separately, or all at once using
config_phylib_all_drivers.h (added in the patch which adds the drivers)

We also provide generic drivers for Clause 22 (10/100/1000), and
Clause 45 (10G) PHYs.

We also implement phy_reset(), and call it in phy_connect(). Because
phy_reset() is essentially the same as miiphy_reset, but:
a) must support 10G PHYs, and
b) should use the phylib primitives,

we implement miiphy_reset, using phy_reset(), but only when
CONFIG_PHYLIB is set. Otherwise, we just use the old version. In this
way, we save on compile size, even if we don't manage to save code size.

Pulled ethtool.h and mdio.h from:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
782d640afd15af7a1faf01cfe566ca4ac511319d
With many, many deletions so as to enable compilation under u-boot

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:19 -05:00
Andy Fleming
09c04c2096 Remove instances of phy_read/write
There were a few files which were already using phy_read and phy_write
for their PHY function names.  It's only a few places, and the name
seems most appropriate for the high-level abstraction, so let's
rename the other versions to something more specific.

Also, uec_phy.c had a marvell_init function which I renamed to not
conflict with the one in marvell.c

Lastly, uec_phy.c was putting a space between the phy writing
function names, and the open paren, so I fixed that

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 13:44:46 -05:00
Mingkai Hu
907519108c tsec: arrange the code to avoid useless function declaration
This is merely a rearrangement.  No changes to the code, except
to remove now-useless declarations.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 13:44:46 -05:00
Mingkai Hu
a32a6be28f tsec: use IO accessors for IO accesses
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 13:44:46 -05:00
Florian Fainelli
aad99bbc39 NAND: rearrange ONFI revision checking, add ONFI 2.3
This patch sync with Brian's patch on Linux in nand_flash_detect_onfi()

	commit b7b1a29d94c17e4341856381bccb4d17495bea60
	Author: Brian Norris <computersforpeace@gmail.com>
	Date:   Sun Dec 12 00:23:33 2010 -0800

	    mtd: nand: rearrange ONFI revision checking, add ONFI 2.3

	    In checking for the ONFI revision, the first conditional (for checking
	    "unsupported" ONFI) seems unnecessary.  All ONFI revisions should be
	    backwards-compatible; even if this is not the case on some newer ONFI
	    revision, it should simply fail the second version-checking if-else block
	    (i.e., the bit-fields for 1.0, 2.0, etc. would not be set to 1). Thus, we
	    move our "unsupported" condition after having checked each bit field.

	    Also, it's simple enough to add a condition for ONFI revision 2.3. Note
	    that this does *NOT* mean we handle all new features of ONFI versions
	    above 1.0.

	    Signed-off-by: Brian Norris <computersforpeace@gmail.com>
	    Acked-by: Florian Fainelli <ffainelli@freebox.fr>
	    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Florian Fainelli <florian@openwrt.org>
2011-04-15 15:53:11 -05:00
Florian Fainelli
a931f49296 NAND: Fix integer overflow in ONFI detection of chips >= 4GiB
This patch sync with David's patch on Linux in nand_flash_detect_onfi()

	commit 4ccb3b4497ce01fab4933704fe21581e30fda1a5
	Author: David Woodhouse <David.Woodhouse@intel.com>
	Date:   Fri Dec 3 16:36:34 2010 +0000

    	mtd: nand: Fix integer overflow in ONFI detection of chips >= 4GiB

    	Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Florian Fainelli <florian@openwrt.org>
2011-04-15 15:53:11 -05:00
Nick Thompson
0e57968a21 I2C: OMAP: detect more devices when probing an i2c bus
The omap24xx driver only seems to support devices that have a single subaddress
byte. With these types of devices, the first access in a bus transaction is
usually a write (writes the subaddress) followed by either a read or write to
access the devices registers.

Many such devices will respond to a read as the first access, but there are at
least some that will NACK such a read. (e.g. ADV7180.)

The probe function attempts to detect a devices ACK to a read access only and
fails to find devices that NACK a read.

This commit modifies the probe function to start a write instead. This detects
devices that respond to reads (since they must also respond to writes) as well
as those that only respond to writes. The bus is immediately set to idle after a
(N)ACK avoiding actually writing anything to the device.

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
2011-04-14 08:33:23 +02:00
Wolfgang Denk
f16b608ae7 Merge branch 'sf' of git://git.denx.de/u-boot-blackfin 2011-04-13 22:04:11 +02:00
Peter Tyser
2c51983b81 cfi_flash: Fix CONFIG_SYS_FLASH_AUTOPROTECT_LIST usage
Commit 6ee1416e81 (mtd, cfi: introduce
void flash_protect_default(void)) introduced a bug which resulted in
boards that define CONFIG_SYS_FLASH_AUTOPROTECT_LIST not compiling with
the the following errors and warning:
  ptyser@petert u-boot $ make -s xpedite520x
  Configuring for xpedite520x board...
  cfi_flash.c: In function 'flash_protect_default':
  cfi_flash.c:2118: error: 'i' undeclared (first use in this function)
  cfi_flash.c:2118: error: (Each undeclared identifier is reported only once
  cfi_flash.c:2118: error: for each function it appears in.)
  cfi_flash.c:2118: error: 'apl' undeclared (first use in this function)
  cfi_flash.c:2118: error: invalid application of 'sizeof' to incomplete type 'struct apl_s'
  cfi_flash.c: In function 'flash_init':
  cfi_flash.c:2137: warning: unused variable 'apl'

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reported-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Heiko Schocher <hs@denx.de>
2011-04-13 21:50:25 +02:00
James Kosin
1c091f59a0 sf: sst: add support for SST25VF064C
Signed-off-by: James Kosin <jkosin@intcomgrp.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 15:39:08 -04:00
Raffaele Recalcati
8511cd84ab MMC may wrongly regconize 2GB eMMC as high capacity
Hi Terry,

> So I guess:
> mmc_init calls mmc_send_op_cond  that set  high_capacity,
> than it calls mmc_startup, that, with MMC_CMD_SEND_CSD  command, set
> the capacity, using values in CSD register.
> So I guess that mmc_change_freq should not recalculate high_capacity.
>
> It seems better, isn't it?
>
> Regards,
> Raffaele
>

Finally I think that it is enough to apply the following patch in order
to fix the issue.

Regards,
Raffaele

Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 07:09:04 -05:00
Raffaele Recalcati
5db2fe3ad9 mmc: trace added
Defining CONFIG_MMC_TRACE in the include board file it is possible to activate
a tracing support.
This code helps in case of eMMC hw failure or to investigate possible eMMC
initialization issues.

Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 07:09:04 -05:00
Raffaele Recalcati
31cacbabf0 mmc: SEND_OP_COND considers card capabilities (voltage)
The first SEND_OP_COND (CMD1) command added is used to ask card capabilities.
After it an AND operation is done between card capabilities and host
capabilities (at the moment only for the voltage field).
Finally the correct value is sent to the MMC, waiting that the card
exits from busy state.

Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 07:09:04 -05:00
Raffaele Recalcati
5d4fc8d907 mmc: checking status after commands with R1b response
It is recommended to check card status after these kind of commands.
This is done using CMD13 (SEND_STATUS) JEDEC command until
the card is ready.
In case of error the card status field is displayed.

Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 07:08:57 -05:00
Minkyu Kang
8baf939c2c mmc: remove duplicated header file
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 06:36:15 -05:00
Thomas Chou
d52ebf1022 mmc: add generic mmc spi driver
This patch supports mmc/sd card with spi interface. It is based on
the generic mmc framework. It works with SDHC and supports multi
blocks read/write.

The crc checksum on data packet is enabled with the def,

There is a subcomamnd "mmc_spi" to setup spi bus and cs at run time.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 06:35:22 -05:00
Mike Frysinger
5f837c2c0e mmc: constify & localize data
These local vars need not be writable nor exported.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 06:35:22 -05:00
Frans Meulenbroeks
63fb5a7e4b drivers/mmc/fsl_esdhc.c: reordered tests
As DATA_ERROR includes the value IRQSTAT_DTOE, a timeout error
would yield the first error return instead of TIMEOUT.
By swapping the test TIMEOUTs are reported as such

An alternate solution would be to remove the IRQSTAT_DTOE from the DATA_ERROR define
but as that one might be less desired I've opted for the simplest solution

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 06:35:22 -05:00
Wolfgang Wegner
b97e0cd788 add CONFIG_SPI_IDLE_VAL for cf_spi.c to allow use of spi_mmc
This patch adds CONFIG_SPI_IDLE_VAL to cf_spi.c
The default setting is 0x0 to behave same as current version, in case
CONFIG_SPI_MMC is set, the value is set to 0xFFFF (all ones). In either
case, the value can be overwritten by board configuration.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 06:35:22 -05:00
Matt Waddel
ce0fbcd2e1 MMC: Max blocks value adjustable
The maximum blocks value was hardcoded to 65535 due to a 16 bit
register length.  The value can change for different platforms.
This patch makes the default the current value of 65535, but it
is configurable for other platforms.

Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 06:35:22 -05:00
Alagu Sankar
b44c70837a SD1.00 wide-bus fix
Fixed a bug wherein SD version 1.0 cards were not configured for 4-bit mode

Signed-off-by: Alagu Sankar <alagusankar@embwise.com>
2011-04-13 03:50:43 -05:00
Macpaul Lin
04c2dd827b ftwdt010_wdt: move header to include/faraday and enhance
1. Move header to include/faraday
2. Fix include path in ftwdt010_wdt.c
3. Fix function prototype and declaration to
  - ftwdt010_wdt_settimeout
  - ftwdt010_wdt_reset
  - ftwdt010_wdt_disable
4. Add "#if definde (CONFIG_HW_WATCHDOG)" let user have flexibilty
  to choose which better to his product.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-04-12 22:58:33 +02:00
Loïc Minier
6052cbab40 Fix misc spelling errors found by lintian
Signed-off-by: Loc Minier <loic.minier@linaro.org>
2011-04-12 22:58:31 +02:00
Mike Frysinger
493c360721 sf: use print_size() for sector_size output
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:30:25 -04:00
Mike Frysinger
f8f0757dcb sf: localize erase funcs
No need for these to be exported as they are only accessed indirectly
via function pointers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:56 -04:00
Mike Frysinger
c5910874ba sf: sst: setup read func
The previous unification patch missed setting up the sst read func.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:54 -04:00
Richard Retanubun
4e6a515899 sf: add struct spi_flash.sector_size parameter
This patch adds a new member to struct spi_flash (u16 sector_size)
and updates the spi flash drivers to start populating it.

This parameter can be used by spi flash commands that need to round
up units of operation to the flash's sector_size.

Having this number in one place also allows duplicated code to be
further collapsed into one common location (such as erase parameter
and the detected message).

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:37 -04:00
Mike Frysinger
cdb6a00fb8 sf: atmel: undo unification of status polling
The AT45 flashes are completely different (at the command set and
status register level) from all other SPI flashes, so we can't unify
their logic with common code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 23:41:09 -04:00
Macpaul Lin
9096963c72 ftwdt010_wdt: support faraday ftwdt010 watchdog
Faraday ftwdt010 watchdog is an architecture independant
watchdog. It is usually used in SoC chip design.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-04-11 22:47:52 +02:00
Roy Zang
2c2668f971 Net: Add Intel E1000 82574L PCIe card support
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-11 22:20:13 +02:00
Ben Gardiner
7d2fade7b1 ea20: fix undefined PHY_* errors
This patch fixes ea20 after 8ef583a035 where
the u-boot custom PHY_ macros were replaced with those of linux/mii.h MII_
definitions except in the RMII support for davinci_emac. Probably also due to
the merge path of changes in 2010.12.

Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca>
CC: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:28:44 +02:00
Mike Frysinger
a4c3b40b33 sf: unify read functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:55 +02:00
Mike Frysinger
e7b44eddbe sf: unify erase functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:54 +02:00
Mike Frysinger
6163045bcd sf: unify status polling for ready bit
All of the spi flash drivers implement the status register polling for
detecting the device ready state, so unify them all in a new helper
function -- spi_flash_wait_ready.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:53 +02:00
Mike Frysinger
000044d8bf sf: unify read/write helpers
These functions largely do the same exact thing, so unify them all
into one basic function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:49 +02:00
Wolfgang Denk
17e967b3df Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2011-04-10 21:24:40 +02:00
Wolfgang Denk
a8708a8634 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2011-04-10 21:06:27 +02:00