Commit graph

16 commits

Author SHA1 Message Date
Horatiu Vultur
bd9216e29b board: mscc: luton: Update MSCC Luton board
Implement method board_phy_config to configure the external phys
on the pcb90.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:46:36 +02:00
Horatiu Vultur
06d270cf57 board: mscc: ocelot: Update MSCC Ocelot board.
Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Horatiu Vultur
d2691b4af2 board: mscc: serval: Update MSCC Serval boards
In Serval SoC family there are 2 different pcb, both of them have the same
phy, but with different version. Therefore implement board_phy_config
and set all the phys in the same way.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Horatiu Vultur
c6b2e7117d board: mscc: serval: Fix board detect
When detecting the board, it was reading a register in the GPIO page of
the phy and based on that value it was making a decision. The bug was that
after the GPIO page for the first phy was set it was not reseted back.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Horatiu Vultur
6aa50ae22c board: mscc: jr2: Update MSCC Jaguar2 boards
In Jaguar2 SoC family there are 3 different pcb. Each of this needs
to configure the phys in different ways. Therefore implement the
function board_phy_config and based on pcb configure them accordingly.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Horatiu Vultur
78b5431410 MSCC: Fix Jaguar2 board detection.
When power cycle the Jaguar2 boards, it couldn't read the
phys, therefore it always deduce that the board type is
pcb111.

Add a small delay after setting the gpio pins, fix the
issue.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01 14:09:31 +01:00
Horatiu Vultur
45988b123c MSCC: Jaguar2 enable debug uart
Enable debug uart for Jaguar2 SoC family.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01 14:08:54 +01:00
Horatiu Vultur
a834cb817f MSCC: Add board support for Serval SoC family.
Add board support and configuration for Jaguar2 SoC family.
The detection of the board type is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
036d95958b MSCC: Add board support for Servalt SoC family
Add board support, configuration and DTS for Servalt SoC
family. Currently there is one board in this family.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:27:26 +01:00
Gregory CLEMENT
2f8d067736 MIPS: mscc: ocelot: add switch reset support
On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-23 18:26:44 +01:00
Horatiu Vultur
c75c908316 MSCC: Add board support for Jaguar2 SOC family
Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
4deb09632d mips: ocelot: Enable use of serial gpio for LED
This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
711f2dc08d mips: luton: Enable use of serial gpio for LED
This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'luton' SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
e9f1492bca mips: mscc: luton+ocelot: Remove board config options, do probing
As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.

Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.

Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Gregory CLEMENT
f8c8cedd7a MSCC: add board support for the Luton based evaluation board
Adding the support for the Luton boards PCB91 which share common code with
the Ocelots boards, including board code, device tree and configuration.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00
Gregory CLEMENT
6787c1ece0 MSCC: add board support for the Ocelots based evaluation boards
Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00